Effect of Second Phase on the Pitting Corrosion of ZL101A Aluminum Alloy in Thin Electrolyte Layer Environment Containing Cl

Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.

https://pubs.acs.org/doi/pdf/10.1021/acs.chemrev.2c00751

Nanoporous Gold: From Structure Evolution to Functional Properties in Catalysis and Electrochemistry

An electrochemical biosensor based on chitosan- and thioctic-acid-modified nanoporous gold (NPG) co-immobilization glycerol kinase (GK) and glycerol-3-phosphate oxidase (GPO) was constructed for glycerol determination in wine. The NPG, with the properties of porous microstructure, large specific surface area, and high conductivity, was beneficial for protecting the enzyme from inactivation and denaturation and enhancing electron transfer in the modified electrode. The co-immobilization of the enzyme by chitosan-embedding and thioctic-acid-modified NPG covalent bonding was beneficial for improving the catalytic performance and stability of the enzyme-modified electrode. Ferrocene methanol (Fm) was used as a redox mediator to accelerate the electron transfer rate of the enzyme-modified electrode. The fabricated biosensor exhibited a wide determination range of 0.1–5 mM, low determination limit of 77.08 μM, and high sensitivity of 9.17 μA mM−1. Furthermore, it possessed good selectivity, repeatability, and stability, and could be used for the determination of glycerol in real wine samples. This work provides a simple and novel method for the construction of biosensors, which may be helpful to the application of enzymatic biosensors in different determination scenarios.

/pdf/electrochemical-biosensor-based-on-chitosan-and-thioctic-1qji4k73.pdf

Electrochemical Biosensor Based on Chitosan- and Thioctic-Acid-Modified Nanoporous Gold Co-Immobilization Enzyme for Glycerol Determination

Corrosion mechanism and fatigue behavior of aluminum alloy with high silicon content

Casting of high surface area electrodes enabled by low-temperature welding of copper nanoporous powders and nanoparticles hybrid feedstocks

Chelation-mediated synthesis of nanoporous gold at near-neutral pH and room temperature by free corrosion dealloying of gold-copper alloy driven by oxygen reduction

Semiconducting polymers are a versatile class of materials that are used in many (opto)electronic applications, including organic photovoltaics. However, they are inherently disordered and suffer from poor conductivities due to bends and kinks in the polymer chains along the conjugated backbone, as well as disorder at grain boundaries. In an effort to reduce polymer disorder, we developed a method to straighten polymer chains by creating amphiphilic conjugated polyelectrolytes (CPEs) that self-assemble in water into worm-like micelles. The present work refines our design rules for self-assembly of CPEs. We present the synthesis and characterization of a straight, micelle-forming polymer, a derivative of poly(cyclopentadithiophene-alt-thiophene) (PCT) bearing two ammoniumcharged groups per cyclopentadithiophene unit. Solution-phase self-assembly of PCT into micelles is observed by both smallangle X-ray scattering (SAXS) and cryo-electron microscopy (cryo-EM), while detailed SAXS fitting allows for characterization of intra-micellar interactions and inter-micelle aggregation. We find that PCT displays significant chain straightening thanks to the lack of steric hindrance between its alternating cyclopentadithiophene and thiophene subunits, which increases the propensity for the polymer to self-assemble into straight rod-like micelles. This work extends the availability of micelle-forming semiconducting polymers and points to further enhancements that can be made to obtain homogeneous nanostructured polymer assemblies based on cylindrical micelles.

Alexander Simafranca

Papers

Chelation-mediated synthesis of nanoporous gold at near-neutral pH and room temperature by free corrosion dealloying of gold-copper alloy driven by oxygen reduction

Designing Amphiphilic Conjugated Polyelectrolytes for Self-Assembly into Straight-Chain Rod-like Micelles