A new single-stage, single-switch power factor correction converter with output electrical isolation is proposed in this paper. The topology of this converter is derived by combining a boost circuit and a forward circuit in one power stage. To improve the performance of the AC-DC converter (i.e., good power factor correction, low total harmonic distortion (THD) and low DC bus voltage), two bulk storage capacitors are adopted. Its excellent line regulation capability makes the converter suitable for universal input application. Due to its simplified power stage and control circuit, this converter presents a better efficiency, lower cost and higher reliability. Detailed steady state analysis and design procedure are presented. To verify the performance of the proposed converter, a design example along with P-simulation program with integrated circuit emphasis (PSPICE) simulation and experimental implementation are given. The measured power factor and efficiency are 99% and 87% at low line (i.e. 110 VAC) operation, and 95% and 81% at high line (i.e. 220 VAC) operation, respectively.

/pdf/a-single-switch-ac-dc-converter-with-power-factor-correction-2ixvdne849.pdf

A single-switch AC/DC converter with power factor correction

An access device having an input port for connecting to an upstream section of a coaxial distribution cable and an output port for connecting to a downstream section of a coaxial distribution cable, and provides isolation of an RF communication signal from an AC power signal for access by subscriber network service equipment. The access device also includes power conditioning of the AC signal to provide a DC operating voltage over a separate output to operate the respective subscriber network service equipment.

Cable access device and method

In a light-emitting-diode lamp, there is provided an input impedance-changing circuit for establishing a low input impedance circuit when the light-emitting-diode lamp is missingline turned off. This input impedance-changing circuiting comprises Shunt circuit section, and a detector circuit section. The shunt circuit section includes a low impedance element and a controllable switching device connected in series. The detector circuit section detects turning off of the light-emitting-diode lamp and, in response to such detection, close the switching device to thereby cause electric current to flow through the shunt circuit section in order to simulate lower input impedance of the light-emitting-diode lamp. When the light-emitting-diode lamp replaces a conventional traffic signal incandescent lamp, the input impedance-changing circuitry prevents the conflict monitor of the already installed traffic-light lamp system to detect a high lamp impedance and accordingly a faulty lamp.

LED lamp with a fault-indicating impedance-changing circuit

A switching power supply includes: a transformer including primary and secondary windings; a switching circuit including first and second switching elements, first and second rectifying elements, first and second capacitive elements and a first inductor; and a rectifying/smoothing circuit. A first bridge circuit is configured by the first and second switching elements located in a diagonal arrangement and the first and second capacitive elements also located in a diagonal arrangement. The first and second rectifying elements are connected in parallel to the first and second switching elements, respectively. One of the first and second rectifying elements is in forward direction and other is in inverse direction. The first inductor is disposed on a connection line between the pair of input terminals and the first bridge circuit. The primary winding is connected to the first bridge circuit to form a H-bridge configuration. The secondary winding is disposed in the rectifying/smoothing circuit.

Switching power supply

A power supply electromagnetic interference (EMI) filter circuit and technique In one embodiment, a method of filtering EMI in a power supply includes rectifying an AC signal from an AC source, smoothing the rectified AC signal with a bulk storage capacitor to provide a DC output as an input to a power conversion circuit and filtering the EMI generated by the power conversion circuit from reaching the AC source by using the bulk capacitor and one or more inductors in combination with the AC source capacitance as an EMI filter In one embodiment the method also includes the use of one or more of the inductors as a fusing element

Method and apparatus for providing input EMI filtering in power supplies

A multi-channel single stage high power factor AC to DC converter comprising a pair of input terminals for connecting to an a.c. supply voltage, a bridge rectifier connected across the input terminal, for converting the a.c. supply voltage to a d.c. voltage, and a D.C. to D.C. converter connected to the bridge rectifier and including a high frequency switch for converting the d.c. voltage to high frequency intermittent pulses, a transformer having a primary winding connected to the high frequency switch and having at least two secondary windings each connected to a respective rectifier for producing a d.c. output voltage thereacross. A pair of capacitors are connected in the input of the DC to DC converter so that when the switch is OPEN a first one of the capacitors receives energy from the a.c. supply and a second one of the capacitors receives energy from the transformer, whilst when the switch is CLOSED the first capacitor restores energy to the transformer and the second capacitor restores charge to the a.c. supply. Such a configuration avoids the need to split the energy transfer capacitor between the input and output of the DC to DC converter and thus avoids duplication of part of the energy transfer capacitor in each output channel when multiple outputs are provided.

Alexander Zak

Papers

Multi-channel single stage high power factor AC to DC converter