In this paper, a fuzzy logic controller is developed for hybrid vehicles with parallel configuration. Using the driver command, the state of charge of the energy storage, and the motor/generator speed, a set of rules have been developed, in a fuzzy controller, to effectively determine the split between the two powerplants: electric motor and internal combustion engine. The underlying theme of the fuzzy rules is to optimize the operational efficiency of all components, considered as one system. Simulation results were used to assess the performance of the controller. A forward-looking hybrid vehicle model was used for implementation and simulation of the controller. Potential fuel economy improvement is shown by using fuzzy logic, relative to other controllers, which maximize only the efficiency of the engine.

Fuzzy logic control for parallel hybrid vehicles

An electric power-steering device has a speed-reducing mechanism (17) for reducing the speed of an output shaft (16) of an electric motor (15). The speed-reducing mechanism (17) has an internal gear (39) engaged and rotated with the output shaft (16) and an external gear (40) with which the internal gear (39) internally meshes. A drive pulley (41) rotatable together with the external gear (40) and a driven pulley (42) provided so as to surround a steering shaft are connected by an endless belt (43). Speed reduction is obtained by the internal gear (39) and the external gear (40), and the speed-reducing mechanism (17) as a whole achieves a high reduction ratio without greatly reducing the diameter of the drive pulley (41).

Electric power-steering device

Systems and methods are described for a power aggregation system. In one implementation, a service establishes individual Internet connections to numerous electric resources intermittently connected to the power grid, such as electric vehicles. The Internet connection may be made over the same wire that connects the resource to the power grid. The service optimizes power flows to suit the needs of each resource and each resource owner, while aggregating flows across numerous resources to suit the needs of the power grid. The service can bring vast numbers of electric vehicle batteries online as a new, dynamically aggregated power resource for the power grid. Electric vehicle owners can participate in an electricity trading economy regardless of where they plug into the power grid.

Power aggregation system for distributed electric resources

Exemplary embodiments are directed to wireless charging and wireless power alignment of wireless power antennas associated with a vehicle. A wireless power charging apparatus includes an antenna including first and second orthogonal magnetic elements for detecting a horizontal component of a magnetic field generated from a second charging base antenna. A processor determines a directional vector between the antennas.

Wireless power antenna alignment adjustment system for vehicles

Exemplary embodiments are directed to bidirectional wireless power transfer using magnetic resonance in a coupling mode region between a charging base (CB) and a battery electric vehicle (BEV). For different configurations, the wireless power transfer can occur from the CB to the BEV and from the BEV to the CB.

Wireless power transmission in electric vehicles

A method for recharging an electric storage battery in the charging system of an electric vehicle from an electric utility power grid includes determining the length of time required to recharge the battery, determining the desired time when the recharge is to be completed, transmitting to the electric power utility the length of time required to recharge the battery and the desired time, and recharging the battery from the utility grid during a period when projected load demand is lower than peak demand and ending no later than the desired time.

Interactive battery charger for electric vehicle

A hybrid powertrain for an automotive vehicle comprising an internal combustion engine and transmission assembly providing a first selectably shiftable geared torque flow path to vehicle traction wheels and an electric motor-generator unit defining a second geared torque flow path that is located between the output of the first geared torque flow path and the traction wheels. Through the deployment of an appropriate control system, including the necessary control algorithms, the electric motor-generator unit can be operated to supply torque to the traction wheels while the torque flow in the first torque flow path is interrupted during the occurrence of a ratio change in the transmission assembly and during disengagement of a clutch. Because of this interactive control of two power sources, the vehicle driveability can be enhanced along with an improvement of the engine exhaust gas emissions. In addition, the electric motor-generator unit in the second torque flow path can be used to launch the vehicle electrically immediately upon request of the operator. This ability of the powertrain permits engine-off operation during vehicle coast-down and standstill periods without any loss of driveability. During electric launch of the vehicle, the interactive control of the two power sources permits the internal combustion engine to be restarted and then gradually take over the propulsion task from the electric motor-generator unit.

Parallel hybrid powertrain for an automotive vehicle

An automotive vehicle power system includes a battery charger having an input and output. The battery charger receives electrical energy via the input when the input is electrically connected with an electrical energy source. The battery charger also reduces a current provided at the output from a commanded value to a target value that varies according to a voltage at the input if the voltage at the input falls within a predetermined range of voltages.

Input voltage based system and method for charging a vehicle battery

A motor vehicle propulsion system includes an electrical energy source and a traction motor coupled to receive electrical energy from the electrical energy source. The system also has a first bus provided electrical energy by the electrical energy source and a second bus of relatively lower voltage than the first bus. In addition, the system includes an electrically-driven source of reaction gas for the electrical energy source, the source of reaction gas coupled to receive electrical energy from the first bus. Also, the system has an electrical storage device coupled to the second bus for storing electrical energy at the lower voltage. The system also includes a bidirectional energy converter coupled to convert electrical energy from the first bus to the second bus and from the second bus to the first bus.

Propulsion system for a motor vehicle using a bidirectional energy converter

A method of energizing a combined starter/alternator to start an engine in a vehicle including a primary energy storage device and a secondary energy storage device. The method includes the steps of monitoring a charge value on the secondary energy storage device, and activating a converter switching circuit to charge the secondary energy storage device with the primary energy storage device until the charge value is greater than a maximum charge value. Thereafter, an inverter switching circuit is activated to energize the starter/alternator with the power available in the primary and secondary energy storage devices. The starter/alternator is activated as a starter motor until the engine starts or the charge on the secondary energy storage device falls below a mininum charge value.

Allan Roy Gale

Papers

Interactive battery charger for electric vehicle

Parallel hybrid powertrain for an automotive vehicle

Input voltage based system and method for charging a vehicle battery

Propulsion system for a motor vehicle using a bidirectional energy converter

Power delivery circuit with boost for energetic starting in a pulsed charge starter/alternator system