The proliferation of mobile computing devices and local-area wireless networks has fostered a growing interest in location-aware systems and services. In this paper we present RADAR, a radio-frequency (RF)-based system for locating and tracking users inside buildings. RADAR operates by recording and processing signal strength information at multiple base stations positioned to provide overlapping coverage in the area of interest. It combines empirical measurements with signal propagation modeling to determine user location and thereby enable location-aware services and applications. We present experimental results that demonstrate the ability of RADAR to estimate user location with a high degree of accuracy.

/pdf/radar-an-in-building-rf-based-user-location-and-tracking-ow0on2sogt.pdf

RADAR: an in-building RF-based user location and tracking system

Most face databases have been created under controlled conditions to facilitate the study of specific parameters on the face recognition problem. These parameters include such variables as position, pose, lighting, background, camera quality, and gender. While there are many applications for face recognition technology in which one can control the parameters of image acquisition, there are also many applications in which the practitioner has little or no control over such parameters. This database, Labeled Faces in the Wild, is provided as an aid in studying the latter, unconstrained, recognition problem. The database contains labeled face photographs spanning the range of conditions typically encountered in everyday life. The database exhibits “natural” variability in factors such as pose, lighting, race, accessories, occlusions, and background. In addition to describing the details of the database, we provide specific experimental paradigms for which the database is suitable. This is done in an effort to make research performed with the database as consistent and comparable as possible. We provide baseline results, including results of a state of the art face recognition system combined with a face alignment system. To facilitate experimentation on the database, we provide several parallel databases, including an aligned version.

/pdf/labeled-faces-in-the-wild-a-database-forstudying-face-2prti1m53k.pdf

Labeled Faces in the Wild: A Database forStudying Face Recognition in Unconstrained Environments

This paper presents the design, implementation, and evaluation of Cricket, a location-support system for in-building, mobile, location-dependent applications. It allows applications running on mobile and static nodes to learn their physical location by using listeners that hear and analyze information from beacons spread throughout the building. Cricket is the result of several design goals, including user privacy, decentralized administration, network heterogeneity, and low cost. Rather than explicitly tracking user location, Cricket helps devices learn where they are and lets them decide whom to advertise this information to; it does not rely on any centralized management or control and there is no explicit coordination between beacons; it provides information to devices regardless of their type of network connectivity; and each Cricket device is made from off-the-shelf components and costs less than U.S. $10. We describe the randomized algorithm used by beacons to transmit information, the use of concurrent radio and ultrasonic signals to infer distance, the listener inference algorithms to overcome multipath and interference, and practical beacon configuration and positioning techniques that improve accuracy. Our experience with Cricket shows that several location-dependent applications such as in-building active maps and device control can be developed with little effort or manual configuration.

/pdf/the-cricket-location-support-system-vm5xuou8xv.pdf

The Cricket location-support system

This paper describes systems that examine and react to an individual's changing context. Such systems can promote and mediate people's interactions with devices, computers, and other people, and they can help navigate unfamiliar places. We believe that a limited amount of information covering a person's proximate environment is most important for this form of computing since the interesting part of the world around us is what we can see, hear, and touch. In this paper we define context-aware computing, and describe four catagories of context-aware applications: proximate selection, automatic contextual reconfiguration, contextual information and commands, and contex-triggered actions. Instances of these application types have been prototyped on the PARCTAB, a wireless, palm-sized computer.

/pdf/context-aware-computing-applications-500ag25977.pdf

Context-Aware Computing Applications

Instrumenting the physical world through large networks of wireless sensor nodes, particularly for applications like environmental monitoring of water and soil, requires that these nodes be very small, lightweight, untethered, and unobtrusive. The problem of localization, that is, determining where a given node is physically located in a network, is a challenging one, and yet extremely crucial for many of these applications. Practical considerations such as the small size, form factor, cost and power constraints of nodes preclude the reliance on GPS of all nodes in these networks. We review localization techniques and evaluate the effectiveness of a very simple connectivity metric method for localization in outdoor environments that makes use of the inherent RF communications capabilities of these devices. A fixed number of reference points in the network with overlapping regions of coverage transmit periodic beacon signals. Nodes use a simple connectivity metric, which is more robust to environmental vagaries, to infer proximity to a given subset of these reference points. Nodes localize themselves to the centroid of their proximate reference points. The accuracy of localization is then dependent on the separation distance between two-adjacent reference points and the transmission range of these reference points. Initial experimental results show that the accuracy for 90 percent of our data points is within one-third of the separation distance. However, future work is needed to extend the technique to more cluttered environments.

/pdf/gps-less-low-cost-outdoor-localization-for-very-small-3cpquwbe1v.pdf

GPS-less low-cost outdoor localization for very small devices

Recent work on face identification using continuous density Hidden Markov Models (HMMs) has shown that stochastic modelling can be used successfully to encode feature information. When frontal images of faces are sampled using top-bottom scanning, there is a natural order in which the features appear and this can be conveniently modelled using a top-bottom HMM. However, a top-bottom HMM is characterised by different parameters, the choice of which has so far been based on subjective intuition. This paper presents a set of experimental results in which various HMM parameterisations are analysed. >

Parameterisation of a stochastic model for human face identification

We describe a sensor-driven, or sentient, platform for context-aware computing that enables applications to follow mobile users as they move around a building. The platform is particularly suitable for richly equipped, networked environments. The only item a user is required to carry is a small sensor tag, which identifies them to the system and locates them accurately in three dimensions. The platform builds a dynamic model of the environment using these location sensors and resource information gathered by telemetry software, and presents it in a form suitable for application programmers. Use of the platform is illustrated through a practical example, which allows a user's current working desktop to follow them as they move around the environment.

/pdf/the-anatomy-of-a-context-aware-application-iow810czu5.pdf

The anatomy of a context-aware application

Distributed systems for locating people and equipment will be at the heart of tomorrow's active offices. Computer and communications systems continue to proliferate in the office and home. Systems are varied and complex, involving wireless networks and mobile computers. However, systems are underused because the choices of control mechanisms and application interfaces are too diverse. It is therefore pertinent to consider which mechanisms might allow the user to manipulate systems in simple and ubiquitous ways, and how computers can be made more aware of the facilities in their surroundings. Knowledge of the location of people and equipment within an organization is such a mechanism. Annotating a resource database with location information allows location-based heuristics for control and interaction to be constructed. This approach is particularly attractive because location techniques can be devised that are physically unobtrusive and do not rely on explicit user action. The article describes the technology of a system for locating people and equipment, and the design of a distributed system service supporting access to that information. The application interfaces made possible by or that benefit from this facility are presented. >

/pdf/a-distributed-location-system-for-the-active-office-5doci5xipq.pdf

A distributed location system for the active office

The rapid emergence of mobile computers as a popular, and increasingly powerful, computing tool is presenting new challenges. This subject is already being widely addressed within the computing literature. A complementary and relatively unexplored notion of mobility is one in which application interfaces, rather than the computer on which the applications run, are able to move. The Teleporting System developed at the Olivetti Research Laboratory (ORL) is a tool for experiencing such "mobile applications". It operates within the X Window System, and allows users to interact with their existing X applications at any X display within a building. The process of controlling the interface to the teleporting system is very simple. This simplicity comes from the use of an automatically maintained database of the location of equipment and people within the building. This paper describes the teleporting system, what it does, and how it is used. We outline some of the issues of making applications mobile that have arisen during its implementation.

/pdf/teleporting-making-applications-mobile-fezoji1ol3.pdf

Andy Harter

Papers

Parameterisation of a stochastic model for human face identification

The anatomy of a context-aware application

A distributed location system for the active office

The anatomy of a context-aware application

Teleporting - Making Applications Mobile