Porphyry Cu systems host some of the most widely distributed mineralization types at convergent plate boundaries, including porphyry deposits centered on intrusions; skarn, carbonate-replacement, and sediment-hosted Au deposits in increasingly peripheral locations; and superjacent high- and intermediate-sulfidation epithermal deposits. The systems commonly define linear belts, some many hundreds of kilometers long, as well as occurring less commonly in apparent isolation. The systems are closely related to underlying composite plutons, at paleodepths of 5 to 15 km, which represent the supply chambers for the magmas and fluids that formed the vertically elongate (>3 km) stocks or dike swarms and associated mineralization. The plutons may erupt volcanic rocks, but generally prior to initiation of the systems. Commonly, several discrete stocks are emplaced in and above the pluton roof zones, resulting in either clusters or structurally controlled alignments of porphyry Cu systems. The rheology and composition of the host rocks may strongly influence the size, grade, and type of mineralization generated in porphyry Cu systems. Individual systems have life spans of ~100,000 to several million years, whereas deposit clusters or alignments as well as entire belts may remain active for 10 m.y. or longer.

The alteration and mineralization in porphyry Cu systems, occupying many cubic kilometers of rock, are zoned outward from the stocks or dike swarms, which typically comprise several generations of intermediate to felsic porphyry intrusions. Porphyry Cu ± Au ± Mo deposits are centered on the intrusions, whereas carbonate wall rocks commonly host proximal Cu-Au skarns, less common distal Zn-Pb and/or Au skarns, and, beyond the skarn front, carbonate-replacement Cu and/or Zn-Pb-Ag ± Au deposits, and/or sediment-hosted (distal-disseminated) Au deposits. Peripheral mineralization is less conspicuous in noncarbonate wall rocks but may include base metal- or Au-bearing veins and mantos. High-sulfidation epithermal deposits may occur in lithocaps above porphyry Cu deposits, where massive sulfide lodes tend to develop in deeper feeder structures and Au ± Ag-rich, disseminated deposits within the uppermost 500 m or so. Less commonly, intermediate-sulfidation epithermal mineralization, chiefly veins, may develop on the peripheries of the lithocaps. The alteration-mineralization in the porphyry Cu deposits is zoned upward from barren, early sodic-calcic through potentially ore-grade potassic, chlorite-sericite, and sericitic, to advanced argillic, the last of these constituting the lithocaps, which may attain >1 km in thickness if unaffected by significant erosion. Low sulfidation-state chalcopyrite ± bornite assemblages are characteristic of potassic zones, whereas higher sulfidation-state sulfides are generated progressively upward in concert with temperature decline and the concomitant greater degrees of hydrolytic alteration, culminating in pyrite ± enargite ± covellite in the shallow parts of the litho-caps. The porphyry Cu mineralization occurs in a distinctive sequence of quartz-bearing veinlets as well as in disseminated form in the altered rock between them. Magmatic-hydrothermal breccias may form during porphyry intrusion, with some of them containing high-grade mineralization because of their intrinsic permeability. In contrast, most phreatomagmatic breccias, constituting maar-diatreme systems, are poorly mineralized at both the porphyry Cu and lithocap levels, mainly because many of them formed late in the evolution of systems.

Porphyry Cu systems are initiated by injection of oxidized magma saturated with S- and metal-rich, aqueous fluids from cupolas on the tops of the subjacent parental plutons. The sequence of alteration-mineralization events charted above is principally a consequence of progressive rock and fluid cooling, from >700° to <250°C, caused by solidification of the underlying parental plutons and downward propagation of the lithostatic-hydrostatic transition. Once the plutonic magmas stagnate, the high-temperature, generally two-phase hyper-saline liquid and vapor responsible for the potassic alteration and contained mineralization at depth and early overlying advanced argillic alteration, respectively, gives way, at <350°C, to a single-phase, low- to moderate-salinity liquid that causes the sericite-chlorite and sericitic alteration and associated mineralization. This same liquid also causes mineralization of the peripheral parts of systems, including the overlying lithocaps. The progressive thermal decline of the systems combined with synmineral paleosurface degradation results in the characteristic overprinting (telescoping) and partial to total reconstitution of older by younger alteration-mineralization types. Meteoric water is not required for formation of this alteration-mineralization sequence although its late ingress is commonplace.

Many features of porphyry Cu systems at all scales need to be taken into account during planning and execution of base and precious metal exploration programs in magmatic arc settings. At the regional and district scales, the occurrence of many deposits in belts, within which clusters and alignments are prominent, is a powerful exploration concept once one or more systems are known. At the deposit scale, particularly in the porphyry Cu environment, early-formed features commonly, but by no means always, give rise to the best ore-bodies. Late-stage alteration overprints may cause partial depletion or complete removal of Cu and Au, but metal concentration may also result. Recognition of single ore deposit types, whether economic or not, in porphyry Cu systems may be directly employed in combination with alteration and metal zoning concepts to search for other related deposit types, although not all those permitted by the model are likely to be present in most systems. Erosion level is a cogent control on the deposit types that may be preserved and, by the same token, on those that may be anticipated at depth. The most distal deposit types at all levels of the systems tend to be visually the most subtle, which may result in their being missed due to overshadowing by more prominent alteration-mineralization.

Porphyry Copper Systems

In most published hydrothermal ore deposit models, the main agent of metal transport is an aqueous liquid. However, there is increasing evidence from volcanic vapors, geothermal systems (continental and submarine), vapor-rich fluid inclusions, and experimental studies that the vapor phase may be an important and even dominant ore fluid in some hydrothermal systems. This paper reviews the evidence for the transport of metals by vapor (which we define as an aqueous fluid of any composition with a density lower than its critical density), clarifies some of the thermodynamic controls that may make such transport possible, and suggests a model for the formation of porphyry and epithermal deposits that involves precipitation of the ores from vapor or a vapor-derived fluid.

Analyses of vapor (generally >90% water) released from volcanic fumaroles at temperatures from 500° to over 900°C and near-atmospheric pressure typically yield concentrations of ore metals in the parts per billion to parts per million range. These vapors also commonly deposit appreciable quantities of ore minerals as sublimates. Much higher metal concentrations (from ppm to wt %) are observed in vapor inclusions trapped at pressures of 200 to 1,000 bars in deeper veins at lower temperatures (400°–650°C). Moreover, concentrations of some metals, notably Cu and Au, are commonly higher in vapor inclusions than they are in inclusions of coexisting hypersaline liquid (brine). Experiments designed to determine the concentration of Cu, Sn, Ag, and Au in HCl-bearing water vapor at variable although relatively low pressures (up to 180 bars) partly explain this difference. These experiments show that metal solubility is orders of magnitude higher than predicted by volatility data for water-free systems, and furthermore that it increases sharply with increasing water fugacity and correlates positively with the fugacity of HCl. Thermodynamic analysis shows that metal solubility is greatly enhanced by reaction of the metal with HCl and by hydration, which results in the formation of species such as MeCl m . n H2O. Nonetheless, the concentrations measured by these experiments are considerably lower than those measured in experiments involving aqueous liquids or determined for vapor fluid inclusions. A possible explanation for this and for the apparent preference of metals such as Cu and Au for the vapor over the coexisting brine in some natural settings is suggested by limited experimental studies of metal partitioning between vapor and brine. These studies show that, whereas Cu, Fe, and Zn all partition strongly into the liquid in chloride-bearing sulfur-free systems, Cu partitions preferentially into the vapor in the presence of significant concentrations of sulfur. We therefore infer that high concentrations of Cu and Au in vapor inclusions reflect the strong preference of sulfur for the vapor phase and the formation of sulfur-bearing metallic gas species.

Phase stability relationships in the system NaCl-H2O indicate how vapor transport of metals may occur in nature, by showing a range of possible vapor evolution paths for the conditions of porphyry-epithermal systems. At the world-class Bingham Canyon porphyry Cu-Au deposit, evidence from fluid inclusions supports a model in which a single-phase fluid of intermediate to vapor-like density ascends from a magma chamber. On cooling and decompression, this fluid condenses a small fraction of brine by intersecting the two-phase surface on the vapor side of the critical curve, without significantly changing the composition of the expanding vapor. Vapor and brine reach Cu-Fe sulfide saturation as both phases cool below 425°C. Vapor, which is the dominant fluid in terms of the total mass of H2O, Cu, and probably even Cl, is interpreted to be the main agent of metal transport. The evolution of fluids leading to high-grade epithermal gold mineralization is initiated by an H2S-, SO2-, Au-, and variably Cu- and As-rich vapor, which separates from an FeCl2-rich brine in a subjacent porphyry environment. In the early stages of the hydrothermal system, vapor expands rapidly and on reaching the epithermal environment, condenses, producing hypogene advanced argillic alteration and residual vuggy quartz and, in some cases, coeval high-sulfidation precious metal mineralization (e.g., Pascua). More commonly, the introduction of precious metals occurs somewhat later, after the site of magmatic fluid exsolution has receded to greater depth. Because of the relatively high pressure, the vapor separating from brine at this stage cools along a pressure-temperature path above the critical curve of the system, causing it to contract to a liquid capable of transporting several parts per million Au to temperatures as low as 150°C.

100th Anniversary Special Paper: Vapor Transport of Metals and the Formation of Magmatic-Hydrothermal Ore Deposits

The coupled geochemistry of Au and As in pyrite from hydrothermal ore deposits

A proposed new type of arsenian pyrite: Composition, nanostructure and geological significance

Tectonic, magmatic, and metallogenic evolution of the Tethyan orogen: From subduction to collision

The giant Pascua epithermal Au-Ag-Cu deposit is located in the El Indio belt of north-central Chile and Argentina and was the product of a high-sulfidation hydrothermal system. The host rocks consist mainly of Triassic granite and heterolithic Miocene breccia pipes. Granitic rocks host ~60 percent of the mineralization (or >80% if granitic breccia fragments are included) but were not the cause of hydrothermal activity. The economic mineralization forms a large orebody centered on Brecha Central, the largest of the breccia pipes, and several smaller satellite bodies that are separated by zones of subeconomic mineralization. Hydrothermal activity produced two main stages of advanced argillic and vuggy silica alteration. These were separated by an intermediate stage of argillic alteration, silicification and hypogene jarosite, which occurred penecontemporaneously with the emplacement of Brecha Central. Main-stage Au-Ag-Cu mineralization occurred toward the end of the second stage of alteration and involved precipitation of native gold with pyrite and enargite and incorporation of Au in the structure of these minerals. Four types of mineralization are recognized based on the occurrence of economic concentrations of Au in rocks containing significant amounts of the following minerals: (1) alunite, pyrite, and enargite; (2) pyrite; (3) pyrite and szomolnokite; and (4) native gold. Main-stage gold mineralization was followed by a sulfate stage represented by barite and anglesite at lower elevations and barite, anglesite, plus primary szomolnokite, the first reported occurrence of this phase as a hydrothermal ore mineral, at higher elevations. Late-stage silver mineralization, characterized by the occurrence of microscopic Cl-, I-, and Hg-bearing phases in voids and fractures, enriched the upper parts of the deposit, forming an extensive subhorizontal zone that overprints previous alteration and mineralization. Advanced argillic alteration and high-sulfidation mineralization at Pascua are interpreted to have resulted from a high-level hydrothermal system developed above a porphyry stock located in Argentina. Extensive vuggy silica and advanced argillic alteration reflect interaction of the wall rocks with acidic magmatic vapors. Gold, copper, and arsenic are interpreted to have been transported by these vapors and to have deposited as a result of their cooling and subsequent condensation. Ore-forming hydrothermal activity terminated with silver enrichment in response to the condensation of residual magmatic vapors during the waning stages of the system.

Geology and Genesis of the Multistage High-Sulfidation Epithermal Pascua Au-Ag-Cu Deposit, Chile and Argentina

This study was undertaken to characterize the mineral paragenesis and metal zoning at the property scale, evaluate the potential sources of ore-related metals, quantify the relationship between intensity of alteration and gold grade, and propose a comprehensive genetic model for the Carlin-type Au deposits at the southern part of the Goldstrike property, Nevada.

Mineralogy, textural relationships, whole-rock composition, and spatial distribution of the studied samples revealed two types of gold ore: Ore I and II. The former, which is hosted by the Roberts Mountains and Rodeo Creek Formations, and the Wispy, Planar, and Upper Mud units of the Popovich Formation, is the most abundant and widespread in the property. Ore I is characterized by intense hydrothermal alteration (e.g., carbonate dissolution, silicification, and precipitation of pyrite) and high amounts of trace elements (e.g., Ag, As, Au, Ba, Cd, Cu, Hg, Mo, Ni, S, Sb, Se, Te, Tl, and Zn). On the other hand, Ore II, which is hosted in the Wispy, Planar, and Soft Sediment Deformation units of the Popovich Formation, is mainly confined to the central-north-northwest portion of the Screamer deposit and is weakly altered with low concentration of trace elements. Both Ores I and II contain similar average concentrations of Au in whole rock (14 and 19 g/t Au, respectively) and in pyrite (290 and 540 ppm, respectively); however, auriferous pyrite from Ore I has higher trace element (As, Ag, Cu, Hg, Ni, Sb, Se, and Tl)/Au ratios than Ore II.

The sedimentary units are interpreted to be the major local source of Cd, Mo, Ni, U, V, and Zn and minor As, Cu, Hg, and Se as denoted by the composition of least altered samples and diagenetic pyrite and sphalerite. this study reveals that Al2O3 and TiO2 are the most immobile compounds, and their distribution indicates a homogeneous source for the detrital components in the sedimentary rocks. Among the ore-related trace elements, Tl best correlates with Au grade ( R 2 = 0.69) and shows some relationship with the calculated amount of pyrite ( R 2 = 0.49), indicating that Tl would be the best element to vector toward zones of high-grade Carlin-type Au mineralization. Gold grades do not correlate with the amount of pyrite, degree of alteration, or organic C.

Our results integrated with available thermodynamic data for AU, ore-related elements, and SiO2 lead us to suggest that the formation of Ore I occurred more proximal to the major mineralizing conduits as the hot, more acid, SiO2- and trace element-rich auriferous fluids interacted with Fe-bearing impure carbonate host rocks, intensely dissolving the carbonate rocks and precipitating quartz and auriferous pyrite in the Betze-Post and Rodeo deposits. As the fluids moved laterally throughout the favorable host rocks, the pH increased, leading to a decreasing in the rate of carbonate dissolution and in the solubility of silica, favoring the formation of more distal Ore II in the central-northern part of the Screamer deposit. Significantly, the gold concentrations in whole rock and in pyrite are, in some way, very similar in both ore types, being slightly higher in Ore II, suggesting that less acidic conditions were still favorable for the incorporation of gold in the structure of pyrite, even at lower concentrations of other trace elements.

Mineral Paragenesis, Alteration, and Geochemistry of the Two Types of Gold Ore and the Host Rocks from the Carlin-Type Deposits in the Southern Part of the Goldstrike Property, Northern Nevada: Implications for Sources of Ore-Forming Elements, Ore Genesis, and Mineral Exploration

Annick Chouinard

Papers

Geology and Genesis of the Multistage High-Sulfidation Epithermal Pascua Au-Ag-Cu Deposit, Chile and Argentina

Mineral Paragenesis, Alteration, and Geochemistry of the Two Types of Gold Ore and the Host Rocks from the Carlin-Type Deposits in the Southern Part of the Goldstrike Property, Northern Nevada: Implications for Sources of Ore-Forming Elements, Ore Genesis, and Mineral Exploration