In complex media such as white paint and biological tissue, light encounters nanoscale refractive-index inhomogeneities that cause multiple scattering. Such scattering is usually seen as an impediment to focusing and imaging. However, scientists have recently used strongly scattering materials to focus, shape and compress waves by controlling the many degrees of freedom in the incident waves. This was first demonstrated in the acoustic and microwave domains using time reversal, and is now being performed in the optical realm using spatial light modulators to address the many thousands of spatial degrees of freedom of light. This approach is being used to investigate phenomena such as optical super-resolution and the time reversal of light, thus opening many new avenues for imaging and focusing in turbid media

/pdf/controlling-waves-in-space-and-time-for-imaging-and-focusing-5dta2s8ww7.pdf

Controlling waves in space and time for imaging and focusing in complex media

Within the last several years, the field of terahertz science and technology has changed dramatically. Many new advances in the technology for generation, manipulation, and detection of terahertz radiation have revolutionized the field. Much of this interest has been inspired by the promise of valuable new applications for terahertz imaging and sensing. Among a long list of proposed uses, one finds compelling needs such as security screening and quality control, as well as whimsical notions such as counting the almonds in a bar of chocolate. This list has grown in parallel with the development of new technologies and new paradigms for imaging and sensing. Many of these proposed applications exploit the unique capabilities of terahertz radiation to penetrate common packaging materials and provide spectroscopic information about the materials within. Several of the techniques used for terahertz imaging have been borrowed from other, more well established fields such as x-ray computed tomography and synthetic aperture radar. Others have been developed exclusively for the terahertz field, and have no analogies in other portions of the spectrum. This review provides a comprehensive description of the various techniques which have been employed for terahertz image formation, as well as discussing numerous examples which illustrate the many exciting potential uses for these emerging technologies.

https://iopscience.iop.org/article/10.1088/0034-4885/70/8/R02/pdf

Imaging with terahertz radiation

Knowledge about the optical properties μa,μs, and g of human blood plays an important role for many diagnostic and therapeutic applications in laser medicine and medical diagnostics. They strongly depend on physiological parameters such as oxygen saturation, osmolarity, flow conditions, haematocrit, etc. The integrating sphere technique and inverse Monte Carlo simulations were applied to measure μa,μs, and g of circulating human blood. At 633 nm the optical properties of human blood with a haematocrit of 10% and an oxygen saturation of 98% were found to be 0.210±0.002 mm-1 for μa,77.3±0.5 mm-1 for μs, and 0.994±0.001 for the g factor. An increase of the haematocrit up to 50% lead to a linear increase of absorption and reduced scattering. Variations in osmolarity and wall shear rate led to changes of all three parameters while variations in the oxygen saturation only led to a significant change of the absorption coefficient. A spectrum of all three parameters was measured in the wavelength range 400-2500 nm for oxygenated and deoxygenated blood, showing that blood absorption followed the absorption behavior of haemoglobin and water. The scattering coefficient decreased for wavelengths above 500 nm with approximately λ-1.7; the g factor was higher than 0.9 over the whole wavelength range. © 1999 Society of Photo-Optical Instrumentation Engineers.

https://www.spiedigitallibrary.org/journals/Journal-of-Biomedical-Optics/volume-4/issue-01/0000/Optical-properties-of-circulating-human-blood-in-the-wavelength-range/10.1117/1.429919.pdf

Optical Properties of Circulating Human Blood in the Wavelength Range 400-2500 nm.

Visually opaque media are ubiquitous in nature. While some materials are opaque because they strongly absorb visible light, others, such as loam, white paint, biological tissue and milk, are opaque because photons traveling within them are predominantly scattered rather than absorbed. A vanishingly small number of photons travel straight through such substances. Instead, light is transported through these materials in a process similar to heat diffusion (figure 1).

Spectroscopy and Imaging with Diffusing Light

This paper describes the estimation of vertical-structure parameters from combined interferometric and polarimetric radar data.

https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1029/1999RS900108

B. J. Uscinski

Papers

Wave Propagation and Scattering