Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

/pdf/prospects-of-colloidal-nanocrystals-for-electronic-and-3dxpyhl3r7.pdf

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

Natural structural materials are built at ambient temperature from a fairly limited selection of components. They usually comprise hard and soft phases arranged in complex hierarchical architectures, with characteristic dimensions spanning from the nanoscale to the macroscale. The resulting materials are lightweight and often display unique combinations of strength and toughness, but have proven difficult to mimic synthetically. Here, we review the common design motifs of a range of natural structural materials, and discuss the difficulties associated with the design and fabrication of synthetic structures that mimic the structural and mechanical characteristics of their natural counterparts.

Bioinspired structural materials

Intercalation and delamination of two-dimensional solids in many cases is a requisite step for exploiting their unique properties. Herein we report on the intercalation of two-dimensional Ti3C2, Ti3CN and TiNbC-so called MXenes. Intercalation of hydrazine, and its co-intercalation with N,N-dimethylformamide, resulted in increases of the c-lattice parameters of surface functionalized f-Ti3C2, from 19.5 to 25.48 and 26.8 A, respectively. Urea is also intercalated into f-Ti3C2. Molecular dynamics simulations suggest that a hydrazine monolayer intercalates between f-Ti3C2 layers. Hydrazine is also intercalated into f-Ti3CN and f-TiNbC. When dimethyl sulphoxide is intercalated into f-Ti3C2, followed by sonication in water, the f-Ti3C2 is delaminated forming a stable colloidal solution that is in turn filtered to produce MXene 'paper'. The latter shows excellent Li-ion capacity at extremely high charging rates.

/pdf/intercalation-and-delamination-of-layered-carbides-and-n54wqm9e9n.pdf

Intercalation and delamination of layered carbides and carbonitrides

In this article, several applications of nanomaterials in food packaging and food safety are reviewed, including: polymer/clay nanocomposites as high barrier packaging materials, silver nanoparticles as potent antimicrobial agents, and nanosensors and nanomaterial-based assays for the detection of food-relevant analytes (gasses, small organic molecules and food-borne pathogens). In addition to covering the technical aspects of these topics, the current commercial status and understanding of health implications of these technologies are also discussed. These applications were chosen because they do not involve direct addition of nanoparticles to consumed foods, and thus are more likely to be marketed to the public in the short term.

Applications of nanotechnology in food packaging and food safety: Barrier materials, antimicrobials and sensors

MXenes, a new family of 2D materials, combine hydrophilic surfaces with metallic conductivity Delamination of MXene produces single-layer nanosheets with thickness of about a nanometer and lateral size of the order of micrometers The high aspect ratio of delaminated MXene renders it promising nanofiller in multifunctional polymer nanocomposites Herein, Ti 3 C 2 T x MXene was mixed with either a charged polydiallyldimethylammonium chloride (PDDA) or an electrically neutral polyvinyl alcohol (PVA) to produce Ti 3 C 2 T x /polymer composites The as-fabricated composites are flexible and have electrical conductivities as high as 22 × 10 4 S/m in the case of the Ti 3 C 2 T x /PVA composite film and 24 × 10 5 S/m for pure Ti 3 C 2 T x films The tensile strength of the Ti 3 C 2 T x /PVA composites was significantly enhanced compared with pure Ti 3 C 2 T x or PVA films The intercalation and confinement of the polymer between the MXene flakes not only increased flexibility but also enhanced cationic intercalation, offering an impressive volumetric capacitance of ∼530 F/cm 3 for MXene/PVA-KOH composite film at 2 mV/s To our knowledge, this study is a first, but crucial, step in exploring the potential of using MXenes in polymer-based multifunctional nanocomposites for a host of applications, such as structural components, energy storage devices, wearable electronics, electrochemical actuators, and radiofrequency shielding, to name a few

/pdf/flexible-and-conductive-mxene-films-and-nanocomposites-with-1i8i5jcfy2.pdf

Flexible and conductive MXene films and nanocomposites with high capacitance

Nanoscale building blocks are individually exceptionally strong because they are close to ideal, defect-free materials. It is, however, difficult to retain the ideal properties in macroscale composites. Bottom-up assembly of a clay/polymer nanocomposite allowed for the preparation of a homogeneous, optically transparent material with planar orientation of the alumosilicate nanosheets. The stiffness and tensile strength of these multilayer composites are one order of magnitude greater than those of analogous nanocomposites at a processing temperature that is much lower than those of ceramic or polymer materials with similar characteristics. A high level of ordering of the nanoscale building blocks, combined with dense covalent and hydrogen bonding and stiffening of the polymer chains, leads to highly effective load transfer between nanosheets and the polymer.

http://science.sciencemag.org/content/sci/318/5847/80.full.pdf

Benjamin G. Pumplin

Papers

Ultrastrong and Stiff Layered Polymer Nanocomposites