Efficient and reliable amplification of chirality has borne its greatest fruit with transition metal-catalyzed reactions since enantiocontrol may often be imposed by replacing an achiral or chiral racemic ligand with one that is chiral and scalemic While the most thoroughly developed enantioselective transition metal-catalyzed reactions are those involving transfer of oxygen (epoxidation and dihydroxylation)1,2 and molecular hydrogen,3 the focus of this review is on the area of enantioselective transition metal-catalyzed allylic alkylations which may involve C-C as well as C-X (X ) H or heteroatom) bond formation4-9 The synthetic utility of transitionmetal-catalyzed allylic alkylations has been soundly demonstrated since its introduction nearly three decades ago10-21 In contrast to processes where the allyl moiety acts as the nucleophilic partner, we will limit our discussion to processes which result in nucleophilic displacements on allylic substrates (eq 1) Such reactions have been recorded with a broad

http://web4.uwindsor.ca/users/j/jlichaa/reference.nsf/0/10ff8b04ff3a317885256d88005720f6/$FILE/cr-1996-96-395-allylpd-asym.pdf

Asymmetric Transition Metal-Catalyzed Allylic Alkylations.

8.4.5. Nitromercuration Reactions 3878 9. Hydroamination of Alkenes and Alkynes under Microwave Irradiation 3878 * To whom correspondence should be addressed. Phone: +49 241 8

Hydroamination: direct addition of amines to alkenes and alkynes.

The substituted indole nucleus [indole is the acronym from indigo (the natural dye) and oleum (used for the isolation)] is a structural component of a vast number of biologically active natural and unnatural compounds. The synthesis and functionalization of indoles has been the object of research for over 100 years, and a variety of well-established classical methods are now available, to name a few of them, the Fisher indole synthesis, the Gassman synthesis of indoles from N-halo-anilines, the Madelung cyclization of N-acyl-o-toluidines, the Bischler indole synthesis, the Batcho-Leimgruber synthesis of indoles from o-nitrotoluenes and dimethylformamide acetals, and the reductive cyclization of o-nitrobenzyl ketones.1 In the last 40 years or so, however, palladiumcatalyzed reactions, generally tolerant of a wide range of functionalities and therefore applicable to complex molecules, have achieved an important place in the arsenal of the practicing organic chemist. Since the invention of an industrial process for the palladium-catalyzed production of acetaldehyde from ethylene in the presence of PdCl2 and CuCl2, an everincreasing number of organic transformations have been based on palladium catalysis. Almost every area of the organic synthesis has been deeply influenced by the profound potential of this versatile transition metal, modifying the way organic chemists design and realize synthetic processes.2,3 Because of its catalytic nature, palladium-catalyzed synthesis can provide access to fine chemicals, agrochemical and pharmaceutical intermediates, and active ingredients in fewer steps and with less waste than classical † In memory of Prof. Bianca Rosa Pietroni, a colleague and very close friend. * To whom correspondence should be addressed. Phone: + 39 (06) 4991-2785. Fax: + 30 (06) 4991-2780. E-mail: sandro.cacchi@ uniroma1.it. 2873 Chem. Rev. 2005, 105, 2873−2920

Synthesis and functionalization of indoles through palladium-catalyzed reactions

Ligand design is becoming an increasingly important part of the synthetic activity in chemistry. This is of course because of the subtle control that ligands exert on the metal center to which they are coordinated. Ligands which contain significantly different chemical functionalities, such as hard and soft donors, are often called hybrid ligands and find increasing use in molecular chemistry. Although the interplay between electronic and steric properties has long been recognized as essential in determining the chemical or physical properties of a complex, predictions remain very difficult, not only because of the considerable diversity encountered within the Periodic Table-different metal centers will behave differently towards the same ligand and different ligands can completely modify the chemistry of a given metal-but also because of the small energy differences involved. New systems may-even through serendipity-allow the emergence of useful concepts that can gain general acceptance and help design molecular structures orientated towards a given property. The concept of ligand hemilability, which finds numerous illustrations with hybrid ligands, has gained increased acceptance and been found to be very useful in explaining the properties of metal complexes and in designing new systems for molecular activation, homogeneous catalysis, functional materials, or small-molecule sensing. In the field of homogeneous enantioselective catalysis, in which steric and/or electronic control of a metal-mediated process must occur in such a way that one stereoisomer is preferentially formed, ligands containing one or more chiral oxazoline units have been found to be very valuable for a wide range of metal-catalyzed reactions. The incorporation of oxazoline moieties in multifunctional ligands of increasing complexity makes such ligands good candidates to display hemilabile properties, which until recently, had not been documented in oxazoline chemistry. Herein, we briefly recall the definition and scope of hemilabile ligands, present the main classes of ligands containing one or more oxazoline moieties, with an emphasis on hybrid ligands, and finally explain why the combination of these two facets of ligand design appears particularly promising.

Hemilability of Hybrid Ligands and the Coordination Chemistry of Oxazoline‐Based Systems

phinoethane) seemed mainly to stabilize intermediates, and often the catalytic reactions were slower when dppe was used instead of the most common monodentate triphenylphosphine. We will briefly review the history of “ligand effects” in catalysis before discussing a range of reactions for which a notable effect has been observed. It has taken quite some time before the positive effect that bidentates can have on selectivities and rates of catalytic reactions was fully recognized. Most of the established examples of bite angle effects involve diphosphine ligands. Therefore, many important catalysts containing a chelate ligand such as bipyridine and diimine will fall outside the scope of this review. The connecting bridge in these bidentates does play a dominant role in the performance of these catalysts, but systematic studies have not been published. The effects of phosphine ligands in catalysis have been known for quite some time. One of the first reports involves the use of triphenylphosphine in the “Reppe” chemistry, the reactions of alkynes, alcohols, and carbon monoxide.1 It was found that formation of acrylic esters was much more efficient using NiBr2(PPh3)2 than NiBr2 without ligand. In the commercial system, though, a phosphine-free catalyst is used. While the reaction was not yet understood mechanistically, the use of phosphines in catalysis attracted the attention of the petrochemical industry worldwide. An early example of a phosphine ligand modified catalytic process is the Shell process for alkene hydroformylation using a cobalt catalyst containing a trialkylphoshine.2 The reaction requires higher temperatures, but it leads to more linear product as compared to the unmodified catalyst. The general mechanism of the hydroformylation reaction has been known for a long time.3 Hydrocyanation as used by Du Pont is another early example of an industrially applied catalytic reaction employing ligands.4 It is a nickel-catalyzed reaction in which aryl phosphite ligands are used for the production of adiponitrile. The development of this process has played a key role in the introduction of the now very common study of “ligand effects” in the field of homogeneous catalysis by organometallic complexes.5 While several industries were working on new homogeneous catalysts, important contributions to the new field were made in academia in the early 1960s with the appearance of the first phosphinemodified hydrogenation catalysts. An early example of a phosphine-free ruthenium catalyst was published by Halpern.6 Triphenylphosphine-modified platinumtin catalysts for the hydrogenation of alkenes were reported by Cramer from Du Pont in 1963.7 In the same year Breslow (Hercules) included a few phosFigure 1. Bite angle: The ligand-metal-ligand angle of bidentate ligands. 2741 Chem. Rev. 2000, 100, 2741−2769

Ligand Bite Angle Effects in Metal-catalyzed C−C Bond Formation

Ligand effects and nucleophilic addition to (.eta.3-allyl)palladium complexes. A carbon-13 NMR study

Effects of phenanthroline type ligands on the dynamic processes of (.eta.3-allyl)palladium complexes. Molecular structure of (2,9-dimethyl-1,10-phenanthroline)[(1,2,3-.eta.)-3-methyl-2-butenyl]chloropalladium

Alkylation of (.pi.-allyl)palladium systems. Mechanism and regiocontrol

Selective stabilization of the anti isomer of (.eta.3-allyl)palladium and -platinum complexes

Reactivity and syn-anti isomerization of (.eta.3-geranyl)- and (.eta.3-neryl)palladium complexes. Evidence for electronic control of the regiochemistry of nucleophilic addition

Bjoern Aakermark

Papers

Ligand effects and nucleophilic addition to (.eta.3-allyl)palladium complexes. A carbon-13 NMR study

Effects of phenanthroline type ligands on the dynamic processes of (.eta.3-allyl)palladium complexes. Molecular structure of (2,9-dimethyl-1,10-phenanthroline)[(1,2,3-.eta.)-3-methyl-2-butenyl]chloropalladium

Alkylation of (.pi.-allyl)palladium systems. Mechanism and regiocontrol

Selective stabilization of the anti isomer of (.eta.3-allyl)palladium and -platinum complexes

Reactivity and syn-anti isomerization of (.eta.3-geranyl)- and (.eta.3-neryl)palladium complexes. Evidence for electronic control of the regiochemistry of nucleophilic addition