In one embodiment, a method is disclosed in which a device receives data regarding a topology of a network. Traffic data for one or more data links in the network and performance data for the one or more data links are also received. A data rate change is simulated for the one or more data links using the topology data, traffic data, and performance data. Based on the simulated data rate change, a data rate change command is provided to one or more nodes associated with the one or more data links.

Centralized adjustment of data rates in mesh networks

Low-noise amplifier (LNA) designers often struggle to simultaneously satisfy gain, noise, stability, and I/O matching requirements. In this article, a novel design technique, tailored for two-stage low-noise amplifiers, is presented. The proposed design method is completely deterministic and exploits inductive source degeneration to obtain a two-stage LNA featuring perfect input and output match together with low noise figure (NF) and a pre-determined gain, including stability analysis. A novel flowchart is provided together with the corresponding design chart that contains gain, matching, and stability information, therefore addressing all key figures-of-merit of a linear amplifier. The design chart is easily implementable in commercial Electronic Design Automation software, to aid designers in the difficult task of selecting the appropriate source degeneration inductor value. The noise performance, on the other hand, is the best possible since the matching networks are designed to provide the input of the two Field Effect Transistors with the optimum termination for noise. The design method is validated with two separate test vehicles operating respectively at Ka-band (26.5-31.5 GHz) and K-band (20.0-24.0 GHz). The realized Monolithic Microwave Integrated Circuits exhibit 18 dB gain for both versions, NF of 1.5 and 1.2 dB, respectively for the Ka-band and K-band version. Input and output matching are typically better than 12 and 15 dB.

A straightforward design technique for narrowband multi‐stage low‐noise amplifiers with I/O conjugate match

A novel result is presented concerning the locus, on the source reflection coefficient plane, of the optimum tradeoff between noise factor and available gain. Although this locus has been discussed and exploited in previous contributions, here, it is shown in a simple manner that it must be an arc of a circumference with center $C_{\mathrm{ tc}}$ and radius $\rho _{\mathrm{ tc}}$ (tangency circle). A handy transformation (a reversible, conformal one) of two-port networks is adopted to study the problem in a simplified, yet general, representation. Properties of the tangency circle are observed in this “noise-centered” representation which are preserved under the conformal transformation, thus providing two equivalent, closed-form approaches to computing $C_{\mathrm{ tc}}$ and $\rho _{\mathrm{ tc}}$ . The second method presented lends itself to being easily implemented in commercial circuit simulators, thus serving as the basis of a simple design method for single-stage low-noise amplifiers.

On the Optimum Noise-Gain Locus of Two-Ports

A wireless communication terminal communicating wirelessly is disclosed. The wireless communication terminal comprises a transmission and reception unit and a processor. The processor receives a signaling field of a first PLCP protocol data unit (PPDU) through the transmission and reception unit, and accesses a channel on the basis of information, for identifying a basic service set (BSS), indicated by the signaling field.

Wireless communication method and wireless communication terminal in high density environment including overlapped basic service sets

A first network device detects at least a first orthogonal code included in a preamble of a network packet received at the first network device from a second network device in an orthogonal frequency division multiplexing (OFDM) communication network. The first network device determines whether the first orthogonal code included in the preamble is associated with an assigned orthogonal code for the first network device. The assigned orthogonal code for the first network device is orthogonal to other assigned orthogonal codes for other network devices in the OFDM communication network. An operational mode of the first network device is changed from a sleep mode to an awake mode in response to determining the first orthogonal code is associated with the assigned orthogonal code for the first network device.

Device triggered wake up of powerline communication devices

Functionality of a powerline communication (PLC) power supply and modem interface can be implemented using a power supply processing unit and a PLC modem unit that can be coupled together using standard, two-wire cabling. The power supply processing unit can generate a DC power signal and a zero cross signal based on an AC powerline signal received via a PLC network. The power supply processing unit can modulate the zero cross signal onto the DC power signal. The power supply processing unit can then generate a composite PLC signal comprising a PLC signal (extracted from the AC powerline signal) and the DC power signal modulated with the zero cross signal. The PLC modem unit can extract the PLC signal, the DC power signal, and the zero cross signal from the composite PLC signal, and then can process the PLC signal based on information associated with the zero cross signal.

Powerline communication power supply and modem interface mechanism

Disclosed are systems and methods for configuring a station coupled to a communication medium. Received signal powers at the station of signals transmitted from a plurality of other stations coupled to the communication medium are measured. A transmit power level of the station, used for determining powers of signals transmitted from the station, is determined based at least in part upon the received signal powers. A detection threshold of the station, used for determining which received signals to accept for further processing and which received signals to ignore, is determined based at least in part upon the received signal powers.

Mitigation of inter-network interference to enable channel reuse

A powerline communication (PLC) power supply and modem interface can be implemented using a power supply processing unit coupled with a PLC modem unit. The power supply processing unit generates a composite PLC signal comprising a PLC signal and a DC power signal modulated with a zero cross signal (all determined from an AC powerline signal). High-powered components of the PLC modem unit can cause signal distortion in the zero cross signal component of the composite PLC signal making it difficult to extract zero cross information. An error correction unit can be implemented at the PLC modem unit to minimize the signal distortion and generate a zero cross signal with little or no error. The PLC modem unit also extracts the PLC signal and the DC power signal from the composite PLC signal, and processes the PLC signal using the zero cross information extracted from the corrected zero cross signal.

Error correction for powerline communication modem interface

Powerline communication networks can be subject to burst interference resulting in loss of throughput and data corruption. A transmitting network device and a receiving network device of a powerline communication network can be configured to select a best performing powerline terminal coupling configuration for powerline communications. The transmitting network device can determine performance measurements associated with each of a plurality of powerline communication channels. The transmitting network device can select a best performing powerline communication channel based on the performance measurements, and can provide an indication of the best performing powerline communication channel to the receiving network device. The transmitting and the receiving network devices can each configure their respective terminal connections to switch to the best performing powerline communication channel. Subsequent communications between the transmitting and the receiving network devices can be initiated via the best performing powerline communication channel.

Celestino Anastasio Corral

Papers

Powerline communication power supply and modem interface mechanism

Mitigation of inter-network interference to enable channel reuse

Error correction for powerline communication modem interface

Terminal selection diversity for powerline communications

Powerline communication power supply and modem interface