High-performance gas sensors prepared using p-type oxide semiconductors such as NiO, CuO, Cr2O3, Co3O4, and Mn3O4 were reviewed. The ionized adsorption of oxygen on p-type oxide semiconductors leads to the formation of hole-accumulation layers (HALs), and conduction occurs mainly along the near-surface HAL. Thus, the chemoresistive variations of undoped p-type oxide semiconductors are lower than those induced at the electron-depletion layers of n-type oxide semiconductors. However, highly sensitive and selective p-type oxide-semiconductor-based gas sensors can be designed either by controlling the carrier concentration through aliovalent doping or by promoting the sensing reaction of a specific gas through doping/loading the sensor material with oxide or noble metal catalysts. The junction between p- and n-type oxide semiconductors fabricated with different contact configurations can provide new strategies for designing gas sensors. p-Type oxide semiconductors with distinctive surface reactivity and oxygen adsorption are also advantageous for enhancing gas selectivity, decreasing the humidity dependence of sensor signals to negligible levels, and improving recovery speed. Accordingly, p-type oxide semiconductors are excellent materials not only for fabricating highly sensitive and selective gas sensors but also valuable additives that provide new functionality in gas sensors, which will enable the development of high-performance gas sensors.

Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview

Metal oxide-based resistive-type gas sensors are solid-state devices which are widely used in a number of applications from health and safety to energy efficiency and emission control. Nanomaterials such as nanowires, nanorods, and nanoparticles have dominated the research focus in this field due to their large number of surface sites facilitating surface reactions. Previous studies have shown that incorporating two or more metal oxides to form a heterojunction interface can have drastic effects on gas sensor performance, especially the selectivity. Recently, these effects have been amplified by designing heterojunctions on the nano-scale. These designs have evolved from mixed commercial powders and bi-layer films to finely-tuned core–shell and hierarchical brush-like nanocomposites. This review details the various morphological classes currently available for nanostructured metal-oxide based heterojunctions and then presents the dominant electronic and chemical mechanisms that influence the performance of these materials as resistive-type gas sensors. Mechanisms explored include p–n and n–n potential barrier manipulation, n–p–n response type inversions, spill-over effects, synergistic catalytic behavior, and microstructure enhancement. Tables are presented summarizing these works specifically for SnO2, ZnO, TiO2, In2O3, Fe2O3, MoO3, Co3O4, and CdO-based nanocomposites. Recent developments are highlighted and likely future trends are explored.

Nanoscale metal oxide-based heterojunctions for gas sensing: A review

Xin Zhou,†,‡ Songyi Lee,† Zhaochao Xu,* and Juyoung Yoon*,† †Department of Chemistry and Nanoscience, Ewha Womans University, Seoul 120-750, Republic of Korea ‡Research Center for Chemical Biology, Department of Chemistry, Yanbian University, Yanjii 133002, People’s Republic of China Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Shahekou, Dalian, Liaoning, People’s Republic of China

Recent Progress on the Development of Chemosensors for Gases.

ZnO nanowires (or nanorods) have been widely studied due to their unique material properties and remarkable performance in electronics, optics, and photonics. Recently, photocatalytic applications of ZnO nanowires are of increased interest in environmental protection applications. This paper presents a review of the current research of ZnO nanowires (or nanorods) with special focus on photocatalysis. We have reviewed the semiconducting photocatalysts and discussed a variety of synthesis methods of ZnO nanowires and their corresponding effectiveness in photocatalysis. We have also presented the characterization of ZnO nanowires from the literature and from our own measurements. Finally, a wide range of uses of ZnO nanowires in various applications is highlighted in this paper.

/pdf/synthesis-characterization-and-applications-of-zno-nanowires-1a5kdv4lbi.pdf

Synthesis, characterization, and applications of ZnO nanowires

Zinc oxide (ZnO) and zeolitic imidazolate framework-8 (ZIF–8) core–shell heterostructures were obtained by using the self-template strategy where ZnO nanorods not only act as the template, but also provide Zn2+ ions for the formation of ZIF–8 shell. The ZIF–8 shell was uniformly deposited to form ZnO@ZIF–8 nanorods with core–shell heterostructures at 70 °C for 24 h as the optimum reaction time by the hydrothermal synthesis. Transmission electron microscopy (TEM) images revealed that the ZnO@ZIF–8 heterostructures are composed of ZnO as core and ZIF–8 as shell. Nitrogen (N2) sorption isotherms demonstrated that the as-prepared ZnO@ZIF–8 nanorods are a typical microporous material. Additionally, the ZnO@ZIF–8 nanorods sensor exhibited distinct gas response for reducing gases with different molecule sizes. The selectivity of the ZnO@ZIF–8 nanorods sensor was obviously improved for the detection of formaldehyde owing to the limitation effect of the aperture of ZIF–8 shell. This study demonstrated that semicon...

Cw Na Chan Woong Na

Papers

Selective detection of NO2 and C2H5OH using a Co3O4-decorated ZnO nanowire network sensor