From the Publisher: 
This is undoubtedly the most accessible book on digital signal processing (DSP) available to the beginner. Using intuitive explanations and well-chosen examples, this book gives you the tools to develop a fundamental understanding of DSP theory. The author covers the essential mathematics by explaining the meaning and significance of the key DSP equations. Comprehensive in scope, and gentle in approach, the book will help you achieve a thorough grasp of the basics and move gradually to more sophisticated DSP concepts and applications.

数字信号处理 = Understanding digital signal processing

While intelligent transportation systems come in many shapes and sizes, arguably the most transformational realization will be the autonomous vehicle. As such vehicles become commercially available in the coming years, first on dedicated roads and under specific conditions, and later on all public roads at all times, a phase transition will occur. Once a sufficient number of autonomous vehicles is deployed, the opportunity for explicit coordination appears. This article treats this challenging network control problem, which lies at the intersection of control theory, signal processing, and wireless communication. We provide an overview of the state of the art, while at the same time highlighting key research directions for the coming decades.

https://publications.lib.chalmers.se/records/fulltext/246871/local_246871.pdf

Coordination of Cooperative Autonomous Vehicles: Toward safer and more efficient road transportation

Software-defined Radios: Architecture, state-of-the-art, and challenges

Condition monitoring of an operating apparatus is essential for lifespan assessment and maintenance planning in a power system. Electrical insulation is a critical aspect to be monitored, since it is susceptible to failure under high electrical stress. To avoid unexpected breakdowns, the level of partial discharge (PD) activity should be continuously monitored because PD occurrence can accelerate the aging process of insulation in high voltage equipment and result in catastrophic failure if the associated defects are not treated at an early stage. For on-site PD detection, the ultra-high frequency (UHF) method was employed in the field and showed its effectiveness as a detection technique. The main advantage of the UHF method is its immunity to external electromagnetic interference with a high signal-to-noise ratio, which is necessary for on-site monitoring. Considering the detection process, sensors play a critical role in capturing signals from PD sources and transmitting them onto the measurement system. In this paper, UHF sensors applied in PD detection were comprehensively reviewed. In particular, for power transformers, the effects of the physical structure on UHF signals and practical applications of UHF sensors including PD localization techniques were discussed. The aim of this review was to present state-of-the-art UHF sensors in PD detection and facilitate future improvements in the UHF method.

Application of UHF Sensors in Power System Equipment for Partial Discharge Detection: A Review

The availability of the RTL-SDR device for less than $20 brings software defined radio (SDR) to the home and work desktops of EE students, professional engineers and the maker community. The RTL-SDR can be used to acquire and sample RF (radio frequency) signals transmitted in the frequency range 25MHz to 1.75GHz, and the MATLAB and Simulink environment can be used to develop receivers using first principles DSP (digital signal processing) algorithms. Signals that the RTL-SDR hardware can receive include: FM radio, UHF band signals, ISM signals, GSM, 3G and LTE mobile radio, GPS and satellite signals, and any that the reader can (legally) transmit of course! In this book we introduce readers to SDR methods by viewing and analysing downconverted RF signals in the time and frequency domains, and then provide extensive DSP enabled SDR design exercises which the reader can learn from. The hands-on SDR design examples begin with simple AM and FM receivers, and move on to the more challenging aspects of PHY layer DSP, where receive filter chains, real-time channelisers, and advanced concepts such as carrier synchronisers, digital PLL designs and QPSK timing and phase synchronisers are implemented. In the book we will also show how the RTL-SDR can be used with SDR transmitters to develop complete communication systems, capable of transmitting payloads such as simple text strings, images and audio across the lab desktop.

The teaching and learning of DSP enabled Software Defined Radio using MATLAB & Simulink and the RTL-SDR

In the last five years, the availability of powerful DSP and communications design software, and the emergence of relatively affordable devices that receive and digitize RF signals, has brought SDR to the desktops of many communications engineers. However, the more recent availability of very low cost SDR devices such as the RTL-SDR, costing less than $20, has brought SDR to the home desktops of undergraduate and graduate students, as well as professional engineers and the maker communities. Since the release of the various open source drivers for the RTL-SDR, many in the digital communications community have used this device to scan the RF spectrum and digitize I/Q signals that are being transmitted in the range 25 MHz to 1.75 GHz. This wide operating range enables the sampling of frequency bands containing signals such as FM radio, ISM signals, GSM, 3G and LTE mobile radio, GPS, and so on. In this article we will describe the opportunity and operation of the RTL-SDR, and the development of a handson, open-courseware for SDR. These educational materials can be integrated into core curriculum undergraduate and graduate courses, and will greatly enhance the teaching of DSP and communications theory, principles, and applications. The lab and teaching materials have recently been used in senior (fourth year undergraduate) courses and are available as open course materials for all to access, use, and evolve.

/pdf/a-low-cost-desktop-software-defined-radio-design-environment-4wgj9uziax.pdf

A low-cost desktop software defined radio design environment using MATLAB, simulink, and the RTL-SDR

Software Defined Radio using MATLAB & Simulink and the RTL-SDR

Partial discharge (PD) is one of the predominant factors to be controlled to ensure reliability and undisrupted functions of power generators, motors, Gas Insulated Switchgear (GIS) and grid connected power distribution equipment, especially in the future smart grid. The emergence of wireless technology has provided numerous opportunities to optimise remote monitoring and control facilities that can play a significant role in ensuring swift control and restoration of HV plant equipment. In order to monitor PD, several approaches have been employed, however, the existing schemes do not provide an optimal approach for PD signal analysis, and are very costly. In this paper an RTL-SDR (Software Defined Radio) based spectrum analyser has been proposed in order to provide a potentially low cost solution for PD detection and monitoring. Initially, a portable spectrum analyser has been used for PD detection that was later replaced by an RTL-SDR device. The proposed schemes exhibit promising results for spectral detection within the VHF and UHF band.

/pdf/partial-discharge-detection-using-low-cost-rtl-sdr-model-for-2ih26de24l.pdf

Partial discharge detection using low cost RTL-SDR model for wideband spectrum sensing

Partial Discharge (PD) occurs when insulation containing defects or voids is subject to high voltages. If left untreated PD can degrade insulation until, eventually, catastrophic insulation failure occurs. The detection of PD current pulses, however, can allow incipient insulation faults to be identified, located and repaired prior to plant failure. Wireless technology has paved the path for PD detection and monitoring. Software Defined Radio (SDR) is a promising technology. Signals from two PD sources are received at six outdoors locations using an SDR USRP N200 which is connected to a laptop. PD sources, thereafter, are localized based on received signal strengths.

/pdf/partial-discharge-localization-based-on-received-signal-25k7ae806b.pdf

D. S. W. Atkinson

Papers

A low-cost desktop software defined radio design environment using MATLAB, simulink, and the RTL-SDR

The teaching and learning of DSP enabled Software Defined Radio using MATLAB & Simulink and the RTL-SDR

Software Defined Radio using MATLAB & Simulink and the RTL-SDR

Partial discharge detection using low cost RTL-SDR model for wideband spectrum sensing

Partial discharge localization based on received signal strength