Sequestration of CO2 in geological media: criteria and approach for site selection in response to climate change

Natural fractures have long been suspected as a factor in production from shale reservoirs because gas and oil production commonly exceeds the rates expected from low-porosity and low-permeability shale host rock. Many shale outcrops, cores, and image logs contain fractures or fracture traces, and microseismic event patterns associated with hydraulic-fracture stimulation have been ascribed to natural fracture reactivation. Here we review previous work, and present new core and outcrop data from 18 shale plays that reveal common types of shale fractures and their mineralization, orientation, and size patterns. A wide range of shales have a common suite of types and configurations of fractures: those at high angle to bedding, faults, bed-parallel fractures, early compacted fractures, and fractures associated with concretions. These fractures differ markedly in their prevalence and arrangement within each shale play, however, constituting different fracture stratigraphies—differences that depend on interface and mechanical properties governed by depositional, diagenetic, and structural setting. Several mechanisms may act independently or in combination to cause fracture growth, including differential compaction, local and regional stress changes associated with tectonic events, strain accommodation around large structures, catagenesis, and uplift. Fracture systems in shales are heterogeneous; they can enhance or detract from producibility, augment or reduce rock strength and the propensity to interact with hydraulic-fracture stimulation. Burial history and fracture diagenesis influence fracture attributes and may provide more information for fracture prediction than is commonly appreciated. The role of microfractures in production from shale is currently poorly understood yet potentially critical; we identify a need for further work in this field and on the role of natural fractures generally.

Natural fractures in shale: A review and new observations

Much of the world's oil and gas has been generated from source rocks inside deep (> 3,000 m or 9,840 ft) seal-bounded fluid compartments. The quantity and composition of the kerogen and the burial history of the source rocks determine the volumes of petroleum generated; however, the migration from the compartments in an oil and gas phase is a pressure-driven process in which the flow direction is controlled by the configuration and internal pressures of the fluid compartments. Many sedimentary basins contain layers of two or more superimposed hydrogeological systems. The shallow systems are usually basin wide in extent and exhibit normal hydrostatic pressures. The deeper systems, where the oil is generated, are not basin wide and are abnormally over pressured. They usu lly consist of a series of individual fluid compartments that are not in hydraulic pressure communication with each other nor with the overlying hydrodynamic regime. Tops of fluid compartments in currently sinking basins do not always follow a specific stratigraphic horizon. They frequently have planar tops and subsurface temperatures ranging from 90 degrees to 100 degrees C (194 degrees to 212 degrees F). The tops in clastic sediments appear to be caused by carbonate mineralization along a thermocline. In the North Sea, the depth to the top of the deepest seal changes with the geothermal gradient. The seal is deeper where the gradient is lower. The generation of oil and gas within the compartments plus the thermal expansion of pore fluids eventually causes fracturing of the top compartment seal during periods of basin sinking. Hydrocarbons and other pore fluids then move vertically into the overlying lower pressured sediments and accumulate in the nearest structural and stratigraphic traps. Seal fracturing causes a pressure drop with compartment fluids rushing to the breakout point. The compartment then re-seals and pressure builds to another breakout. This episodic process continues with resealing and breakout cycles probably occurring in intervals of thousands of years in rapidly sinking basins such as the United States Gulf Coast. This concept of episodic dewatering of deep-basin fluid compartments needs to be considered n any basin-modeling program where the bulk of the oil generation occurs in the compartmented overpressured section of the basin and the oil moves vertically into the normally pressured rocks above.

Generation and Migration of Petroleum from Abnormally Pressured Fluid Compartments: Reply

A review of developments in carbon dioxide storage

The objective of the present paper is to show that groundwater is a general geologic agent. This perception could not, and did not, evolve until the system nature of basinal groundwater flow and its properties, geometries, and controlling factors became recognized and understood through the 1960s and 1970s.

Groundwater as a geologic agent: An overview of the causes, processes, and manifestations

When rocks deform in response to changes in stress, the small variations in pore volume that occur affect the pore fluid pressure. The changes in fluid pressure can be significant if the rate of change of stress is large relative to the rate at which pressure perturbations are dissipated by flow. It has been proposed previously that the gradually increasing loads on sediments undergoing burial can cause excess fluid pressures. We hypothesize that the opposite effect, depression of pore pressure resulting from rebound during erosional unloading, also may occur in certain geologic settings. Simple theoretical treatment of the problem indicates that rocks with small hydraulic diffusivity, such as some shales, could experience significant pore pressure decreases when unloaded by moderate rates of erosion. The analysis further indicates that decreases sufficient to produce negative pressures can occur. No theoretical bar to this condition exists, and it has been achieved in the laboratory. However, in subsurfa...

https://www.jstor.org/stable/pdfplus/30060924.pdf

D. W. Pollock

Papers

Erosional Unloading and Fluid Pressures in Hydraulically "Tight" Rocks