Gallium oxide (Ga2O3) is emerging as a viable candidate for certain classes of power electronics, solar blind UV photodetectors, solar cells, and sensors with capabilities beyond existing technologies due to its large bandgap. It is usually reported that there are five different polymorphs of Ga2O3, namely, the monoclinic (β-Ga2O3), rhombohedral (α), defective spinel (γ), cubic (δ), or orthorhombic (e) structures. Of these, the β-polymorph is the stable form under normal conditions and has been the most widely studied and utilized. Since melt growth techniques can be used to grow bulk crystals of β-GaO3, the cost of producing larger area, uniform substrates is potentially lower compared to the vapor growth techniques used to manufacture bulk crystals of GaN and SiC. The performance of technologically important high voltage rectifiers and enhancement-mode Metal-Oxide Field Effect Transistors benefit from the larger critical electric field of β-Ga2O3 relative to either SiC or GaN. However, the absence of clear demonstrations of p-type doping in Ga2O3, which may be a fundamental issue resulting from the band structure, makes it very difficult to simultaneously achieve low turn-on voltages and ultra-high breakdown. The purpose of this review is to summarize recent advances in the growth, processing, and device performance of the most widely studied polymorph, β-Ga2O3. The role of defects and impurities on the transport and optical properties of bulk, epitaxial, and nanostructures material, the difficulty in p-type doping, and the development of processing techniques like etching, contact formation, dielectrics for gate formation, and passivation are discussed. Areas where continued development is needed to fully exploit the properties of Ga2O3 are identified.

A review of Ga2O3 materials, processing, and devices

/pdf/guest-editorial-the-dawn-of-gallium-oxide-microelectronics-4huiv6te5u.pdf

Guest Editorial: The dawn of gallium oxide microelectronics

Gallium oxide (Ga2O3) is emerging as a viable candidate for certain classes of power electronics with capabilities beyond existing technologies due to its large bandgap, controllable doping, and the availability of large diameter, relatively inexpensive substrates. These applications include power conditioning systems, including pulsed power for avionics and electric ships, solid-state drivers for heavy electric motors, and advanced power management and control electronics. Wide bandgap (WBG) power devices offer potential savings in both energy and cost. However, converters powered by WBG devices require innovation at all levels, entailing changes to system design, circuit architecture, qualification metrics, and even market models. The performance of high voltage rectifiers and enhancement-mode metal-oxide field effect transistors benefits from the larger critical electric field of β-Ga2O3 relative to either SiC or GaN. Reverse breakdown voltages of over 2 kV for β-Ga2O3 have been reported, either with or without edge termination and over 3 kV for a lateral field-plated Ga2O3 Schottky diode on sapphire. The metal-oxide-semiconductor field-effect transistors fabricated on Ga2O3 to date have predominantly been depletion (d-mode) devices, with a few demonstrations of enhancement (e-mode) operation. While these results are promising, what are the limitations of this technology and what needs to occur for it to play a role alongside the more mature SiC and GaN power device technologies? The low thermal conductivity might be mitigated by transferring devices to another substrate or thinning down the substrate and using a heatsink as well as top-side heat extraction. We give a perspective on the materials’ properties and physics of transport, thermal conduction, doping capabilities, and device design that summarizes the current limitations and future areas of development. A key requirement is continued interest from military electronics development agencies. The history of the power electronics device field has shown that new technologies appear roughly every 10-12 years, with a cycle of performance evolution and optimization. The older technologies, however, survive long into the marketplace, for various reasons. Ga2O3 may supplement SiC and GaN, but is not expected to replace them.

/pdf/perspective-ga2o3-for-ultra-high-power-rectifiers-and-xypt4r8hyf.pdf

Perspective: Ga2O3 for ultra-high power rectifiers and MOSFETS

Solar-blind photodetectors are of great interest to a wide range of industrial, civil, environmental, and biological applications. As one of the emerging ultrawide-bandgap semiconductors, gallium oxide (Ga2O3) exhibits unique advantages over other wide-bandgap semiconductors, especially in developing high-performance solar-blind photodetectors. This paper comprehensively reviews the latest progresses of solar-blind photodetectors based on Ga2O3 materials in various forms of bulk single crystal, epitaxial films, nanostructures, and their ternary alloys. The basic working principles of photodetectors and the fundamental properties and synthesis of Ga2O3, as well as device processing developments, have been briefly summarized. A special focus is to address the physical mechanism for commonly observed huge photoconductive gains. Benefitting from the rapid development in material epitaxy and device processes, Ga2O3-based solar-blind detectors represent to date one of the most prospective solutions for UV detection technology towards versatile applications.

/pdf/review-of-gallium-oxide-based-solar-blind-ultraviolet-2iszxfymnr.pdf

Review of gallium-oxide-based solar-blind ultraviolet photodetectors

Gallium oxide (Ga2O3) is an emerging wide bandgap semiconductor that has attracted a large amount of interest due to its ultra-large bandgap of 4.8 eV, a high breakdown field of 8 MV/cm, and high thermal stability. These properties enable Ga2O3 a promising material for a large range of applications, such as high power electronic devices and solar-blind ultraviolet (UV) photodetectors. In the past few years, a significant process has been made for the growth of high-quality bulk crystals and thin films and device optimizations for power electronics and solar blind UV detection. However, many challenges remain, including the difficulty in p-type doping, a large density of unintentional electron carriers and defects/impurities, and issues with the device process (contact, dielectrics, and surface passivation), and so on. The purpose of this article is to provide a timely review on the fundamental understanding of the semiconductor physics and chemistry of Ga2O3 in terms of electronic band structures, optical properties, and chemistry of defects and impurity doping. Recent progress and perspectives on epitaxial thin film growth, chemical and physical properties of defects and impurities, p-type doping, and ternary alloys with In2O3 and Al2O3 will be discussed.

Recent progress on the electronic structure, defect, and doping properties of Ga2O3

The Ge doping of β-Ga2O3(010) films was investigated using plasma-assisted molecular beam epitaxy as the growth method. The dependences of the amount of Ge incorporated on the substrate temperature, Ge-cell temperature, and growth regime were studied by secondary ion mass spectrometry. The electron concentration and mobility were investigated using Van der Pauw Hall patterns. Hall measurement confirmed that Ge acts as an n-dopant in β-Ga2O3(010) films. These results were compared with similar films doped by Sn. The Hall data showed an improved electron mobility for the same electron concentration when Ge is used instead of Sn as the dopant.

https://iopscience.iop.org/article/10.7567/APEX.10.041102/pdf

Dane B. Short

Papers

Ge doping of β-Ga2O3 films grown by plasma-assisted molecular beam epitaxy