There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Despite the impressive photovoltaic performances with power conversion efficiency beyond 22%, perovskite solar cells are poorly stable under operation, failing by far the market requirements. Various technological approaches have been proposed to overcome the instability problem, which, while delivering appreciable incremental improvements, are still far from a market-proof solution. Here we show one-year stable perovskite devices by engineering an ultra-stable 2D/3D (HOOC(CH2)4NH3)2PbI4/CH3NH3PbI3 perovskite junction. The 2D/3D forms an exceptional gradually-organized multi-dimensional interface that yields up to 12.9% efficiency in a carbon-based architecture, and 14.6% in standard mesoporous solar cells. To demonstrate the up-scale potential of our technology, we fabricate 10 × 10 cm2 solar modules by a fully printable industrial-scale process, delivering 11.2% efficiency stable for >10,000 h with zero loss in performances measured under controlled standard conditions. This innovative stable and low-cost architecture will enable the timely commercialization of perovskite solar cells. Up-scaling represents a key challenge for photovoltaics based on metal halide perovskites. Using a composite of 2D and 3D perovskites in combination with a printable carbon black/graphite counter electrode; Granciniet al., report 11.2% efficient modules stable over 10,000 hours.

/pdf/one-year-stable-perovskite-solar-cells-by-2d-3d-interface-3uapzy45tv.pdf

One-Year stable perovskite solar cells by 2D/3D interface engineering

Hybrid perovskites are currently one of the most active fields of research owing to their enormous potential for photovoltaics. The performance of 3D hybrid organic–inorganic perovskite solar cells has increased at an incredible rate, reaching power conversion efficiencies comparable to those of many established technologies. However, the commercial application of 3D hybrid perovskites is inhibited by their poor stability. Relative to 3D hybrid perovskites, low-dimensional — that is, 2D — hybrid perovskites have demonstrated higher moisture stability, offering new approaches to stabilizing perovskite-based photovoltaic devices. Furthermore, 2D hybrid perovskites have versatile structures, enabling the fine-tuning of their optoelectronic properties through compositional engineering. In this Review, we discuss the state of the art in 2D perovskites, providing an overview of structural and materials engineering aspects and optical and photophysical properties. Moreover, we discuss recent developments along with the main limitations of 3D perovskites and assess the advantages of 2D perovskites over their 3D parent structures in terms of stability. Finally, we review recent achievements in combining 3D and 2D perovskites as an approach to simultaneously boost device efficiency and stability, paving the way for mixed-dimensional perovskite solar cells for commercial applications. Combining low-dimensional and 3D perovskites is a promising approach to achieve stable and efficient solar cells. In this Review, we discuss the structural, optical and photophysical properties of low-dimensional perovskites, compare the stability and efficiency of 2D and 3D perovskite devices, and consider 2D/3D composites as a strategy to increase the stability of perovskite solar cells.

Dimensional tailoring of hybrid perovskites for photovoltaics

Flexible and semitransparent organic solar cells (OSCs) have been regarded as the most promising photovoltaic devices for the application of OSCs in wearable energy resources and building-integrated photovoltaics. Therefore, the flexible and semitransparent OSCs have developed rapidly in recent years through the synergistic efforts in developing novel flexible bottom or top transparent electrodes, designing and synthesizing high performance photoactive layer and low temperature processed electrode buffer layer materials, and device architecture engineering. To date, the highest power conversion efficiencies have reached over 10% of the flexible OSCs and 7.7% with average visible transmittance of 37% for the semitransparent OSCs. Here, a comprehensive overview of recent research progresses and perspectives on the related materials and devices of the flexible and semitransparent OSCs is provided.

Flexible and Semitransparent Organic Solar Cells

Hybrid organic–inorganic perovskites emerged as a new generation of absorber materials for high-efficiency low-cost solar cells in 2009. Very recently, fully inorganic perovskite quantum dots also led to promising efficiencies, making them a potentially stable and efficient alternative to their hybrid cousins. Currently, the record efficiency is obtained with CsPbI3, whose crystallographical characterization is still limited. Here, we show through high-resolution in situ synchrotron XRD measurements that CsPbI3 can be undercooled below its transition temperature and temporarily maintained in its perovskite structure down to room temperature, stabilizing a metastable perovskite polytype (black γ-phase) crucial for photovoltaic applications. Our analysis of the structural phase transitions reveals a highly anisotropic evolution of the individual lattice parameters versus temperature. Structural, vibrational, and electronic properties of all the experimentally observed black phases are further inspected base...

/pdf/anharmonicity-and-disorder-in-the-black-phases-of-cesium-3cz1my8br3.pdf

Anharmonicity and Disorder in the Black Phases of Cesium Lead Iodide Used for Stable Inorganic Perovskite Solar Cells

Stability of perovskite solar cells

Organic–inorganic hybrid perovskite solar cells (PSCs) have emerged as a new class of optoelectronic semiconductors that revolutionized the photovoltaic research in the recent years. The perovskite solar cells present numerous advantages include unique electronic structure, bandgap tunability, superior charge transport properties, facile processing, and low cost. Perovskite solar cells have demonstrated unprecedented progress in efficiency and its architecture evolved over the period of the last 5–6 years, achieving a high power conversion efficiency of about 22% in 2016, serving as a promising candidate with the potential to replace the existing commercial PV technologies. This review discusses the progress of perovskite solar cells focusing on aspects such as superior electronic properties and unique features of halide perovskite materials compared to that of conventional light absorbing semiconductors. The review also presents a brief overview of device architectures, fabrication methods, and interface engineering of perovskite solar cells. The last part of the review elaborates on the major challenges such as hysteresis and stability issues in perovskite solar cells that serve as a bottleneck for successful commercialization of this promising PV technology.

https://www.mdpi.com/1996-1073/9/11/861/pdf

Perovskite Solar Cells: Progress and Advancements

Low temperature processed ZnO thin film as electron transport layer for efficient perovskite solar cells

Organic solar cells possess multiple desirable traits, such as low cost, flexibility, and semitransparency, which opens up potential avenues unavailable to other solar technologies, a prime example of this being window applications. For this specific application, a delicate balance between the transmission of light through the device and power conversion efficiency (PCE), dependent on the amount of light absorbed, must be optimized. Here, we report a high-efficiency semitransparent device based on a novel fullerene-free material system. Using an active layer based on the material system PBDB-T:ITIC, optimized devices exhibited PCEs exceeding 7% while also achieving an average visible transmittance (AVT) of 25%. The concurrent demonstration of high efficiency with an AVT of 25% represents a notable step forward for semitransparent organic solar cells. Additionally, the influence of the active layer thickness on the color rendering properties of these cells was studied. Optimization of the active layer thic...

High-Efficiency Semitransparent Organic Solar Cells with Non-Fullerene Acceptor for Window Application

Tin oxide (SnO2) has been reported as a promising electron transport layer (ETL) for planar heterojunction perovskite solar cells (PSCs). This work reports a low temperature solution-processed bila...

Dian Wang

Papers

Stability of perovskite solar cells

Perovskite Solar Cells: Progress and Advancements

Low temperature processed ZnO thin film as electron transport layer for efficient perovskite solar cells

High-Efficiency Semitransparent Organic Solar Cells with Non-Fullerene Acceptor for Window Application

Bilayer SnO2 as Electron Transport Layer for Highly Efficient Perovskite Solar Cells