The performance of heat exchangers can be improved to perform a certain heat-transfer duty by heat transfer enhancement techniques. In general, these techniques can be divided into two groups: active and passive techniques. The active techniques require external forces, e.g. electric field, acoustic or surface vibration, etc. The passive techniques require fluid additives or special surface geometries. Curved tubes have been used as one of the passive heat transfer enhancement techniques and are the most widely used tubes in several heat transfer applications. This article provides a literature review on heat transfer and flow characteristics of single-phase and two-phase flow in curved tubes. Three main categories of curved tubes; helically coiled tubes, spirally coiled tubes, and other coiled tubes, are described. A review of published relevant correlations of single-phase heat transfer coefficients and single-phase, two-phase friction factors are presented.

A review of flow and heat transfer characteristics in curved tubes

Study on forced convective heat transfer in curved pipes: (1st report, laminar region)

The potential industrial applications of curved tubes for single- and two-phase flow are reviewed within the context of physics of flow, trends in the development of technology, and its laboratory to industrial-scale commercialization. Comparison of the performance of curved tube configurations demonstrates its edge over the conventional motionless mixers, heat exchangers, and reactors. Alongside, their respective advantages and limitations are also highlighted. Further, a compendium of the available correlations for single- and two-phase friction factor and heat- and mass-transfer coefficient in curved tubes has also been presented. Key issues regarding the design parameters governing the performance of the curved tubes for mixing and heat- and mass-transfer that impact the research, development, and scale-up or scale-down of such devices are also analyzed. Emerging trends for the development of a new class of curved tubes, namely, inverters and serpentine and chaotic devices are also presented.

A Review on the Potential Applications of Curved Geometries in Process Industry

Providing a comprehensive introduction to the fundamentals and applications of flow and heat transfer in conventional and miniature systems, this fully enhanced and updated edition covers all the topics essential for graduate courses on two-phase flow, boiling, and condensation. Beginning with a concise review of single-phase flow fundamentals and interfacial phenomena, detailed and clear discussion is provided on a range of topics, including two-phase hydrodynamics and flow regimes, mathematical modeling of gas-liquid two-phase flows, pool and flow boiling, flow and boiling in mini and microchannels, external and internal-flow condensation with and without noncondensables, condensation in small flow passages, and two-phase choked flow. Numerous solved examples and end-of-chapter problems that include many common design problems likely to be encountered by students, make this an essential text for graduate students. With up-to-date detail on the most recent research trends and practical applications, it is also an ideal reference for professionals and researchers in mechanical, nuclear, and chemical engineering.

/pdf/two-phase-flow-boiling-and-condensation-in-conventional-and-5aink3qfmk.pdf

Two-phase flow, boiling and condensation in conventional and miniature systems

A calculation procedure for three-dimensional parabolic flows is applied to predict the velocity and temperature fields in helically coiled pipes. The curvature produces a secondary flow and causes departures from the symmetric velocity profile of Poiseuille flow. Predictions are presented of flow and heat transfer in the developing and fully developed regions. Comparisons of the developing and fully developed velocity profiles with experimental data exhibit good agreement. The development of the wall temperature for the case of axially uniform heat flux with an isothermal periphery has been compared with experimental data and the agreement is good. Predictions for fully developed temperature profiles and heat-transfer coefficients also exhibit good agreement with experimental data. Effects of the Dean number on the friction factor and heat transfer are presented.

E.F. McLaughlin

Papers

Heat transfer in tube coils with laminar and turbulent flow