Driven by the rapid escalation of the wireless capacity requirements imposed by advanced multimedia applications (e.g., ultrahigh-definition video, virtual reality, etc.), as well as the dramatically increasing demand for user access required for the Internet of Things (IoT), the fifth-generation (5G) networks face challenges in terms of supporting large-scale heterogeneous data traffic. Nonorthogonal multiple access (NOMA), which has been recently proposed for the third-generation partnership projects long-term evolution advanced (3GPP-LTE-A), constitutes a promising technology of addressing the aforementioned challenges in 5G networks by accommodating several users within the same orthogonal resource block. By doing so, significant bandwidth efficiency enhancement can be attained over conventional orthogonal multiple-access (OMA) techniques. This motivated numerous researchers to dedicate substantial research contributions to this field. In this context, we provide a comprehensive overview of the state of the art in power-domain multiplexing-aided NOMA, with a focus on the theoretical NOMA principles, multiple-antenna-aided NOMA design, on the interplay between NOMA and cooperative transmission, on the resource control of NOMA, on the coexistence of NOMA with other emerging potential 5G techniques and on the comparison with other NOMA variants. We highlight the main advantages of power-domain multiplexing NOMA compared to other existing NOMA techniques. We summarize the challenges of existing research contributions of NOMA and provide potential solutions. Finally, we offer some design guidelines for NOMA systems and identify promising research opportunities for the future.

/pdf/nonorthogonal-multiple-access-for-5g-and-beyond-4vzewzi5qj.pdf

Nonorthogonal Multiple Access for 5G and Beyond

Orthogonal frequency-division multiplexing (OFDM) effectively mitigates intersymbol interference (ISI) caused by the delay spread of wireless channels. Therefore, it has been used in many wireless systems and adopted by various standards. In this paper, we present a comprehensive survey on OFDM for wireless communications. We address basic OFDM and related modulations, as well as techniques to improve the performance of OFDM for wireless communications, including channel estimation and signal detection, time- and frequency-offset estimation and correction, peak-to-average power ratio reduction, and multiple-input-multiple-output (MIMO) techniques. We also describe the applications of OFDM in current systems and standards.

OFDM and Its Wireless Applications: A Survey

The emerging massive/large-scale multiple-input multiple-output (LS-MIMO) systems that rely on very large antenna arrays have become a hot topic of wireless communications. Compared to multi-antenna aided systems being built at the time of this writing, such as the long-term evolution (LTE) based fourth generation (4G) mobile communication system which allows for up to eight antenna elements at the base station (BS), the LS-MIMO system entails an unprecedented number of antennas, say 100 or more, at the BS. The huge leap in the number of BS antennas opens the door to a new research field in communication theory, propagation and electronics, where random matrix theory begins to play a dominant role. Interestingly, LS-MIMOs also constitute a perfect example of one of the key philosophical principles of the Hegelian Dialectics, namely, that “quantitative change leads to qualitative change.” In this treatise, we provide a recital on the historic heritages and novel challenges facing LS-MIMOs from a detection perspective. First, we highlight the fundamentals of MIMO detection, including the nature of co-channel interference (CCI), the generality of the MIMO detection problem, the received signal models of both linear memoryless MIMO channels and dispersive MIMO channels exhibiting memory, as well as the complex-valued versus real-valued MIMO system models. Then, an extensive review of the representative MIMO detection methods conceived during the past 50 years (1965–2015) is presented, and relevant insights as well as lessons are inferred for the sake of designing complexity-scalable MIMO detection algorithms that are potentially applicable to LS-MIMO systems. Furthermore, we divide the LS-MIMO systems into two types, and elaborate on the distinct detection strategies suitable for each of them. The type-I LS-MIMO corresponds to the case where the number of active users is much smaller than the number of BS antennas, which is currently the mainstream definition of LS-MIMO. The type-II LS-MIMO corresponds to the case where the number of active users is comparable to the number of BS antennas. Finally, we discuss the applicability of existing MIMO detection algorithms in LS-MIMO systems, and review some of the recent advances in LS-MIMO detection.

/pdf/fifty-years-of-mimo-detection-the-road-to-large-scale-mimos-44ejto9lpw.pdf

Fifty Years of MIMO Detection: The Road to Large-Scale MIMOs

A new class of low-complexity, yet energy-efficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely, the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO), has emerged. These systems are capable of exploiting the spatial dimensions (i.e., the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication while relying on a single-Radio Frequency (RF) chain. Moreover, SM may be also viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/cooperative protocol design issues, and on their meritorious variants.

/pdf/design-guidelines-for-spatial-modulation-4di7fcwiu9.pdf

Design Guidelines for Spatial Modulation

The millimeter wave (mmWave) frequency band spanning from 30 to 300 GHz constitutes a substantial portion of the unused frequency spectrum, which is an important resource for future wireless communication systems in order to fulfill the escalating capacity demand. Given the improvements in integrated components and enhanced power efficiency at high frequencies, wireless systems can operate in the mmWave frequency band. In this paper, we present a survey of the mmWave propagation characteristics, channel modeling, and design guidelines, such as system and antenna design considerations for mmWave, including the link budget of the network, which are essential for mmWave communication systems. We commence by introducing the main channel propagation characteristics of mmWaves followed by channel modeling and design guidelines. Then, we report on the main measurement and modeling campaigns conducted in order to understand the mmWave band’s properties and present the associated channel models. We survey the different channel models focusing on the channel models available for the 28, 38, 60, and 73 GHz frequency bands. Finally, we present the mmWave channel model and its challenges in the context of mmWave communication systems design.

/pdf/millimeter-wave-communications-physical-channel-models-qh94bqmhc1.pdf

Millimeter-Wave Communications: Physical Channel Models, Design Considerations, Antenna Constructions, and Link-Budget

This chapter contains sections titled: Introduction Overview of Multicarrier CDMA Systems Channel Model Performance of MC-CDMA System Performance of Overlapping Multicarrier DS-CDMA Systems Performance of Multicarrier DS-CDMA-I Systems Performance of AMC DS-CDMA Systems Performance of SFH/MC DS-CDMA Systems Chapter Summary and Conclusion 
]]>

Overview of Multicarrier CDMA

This volume is dedicated to a range of CDMA and MC-CDMA transmission aspects of systems designed for communicating over fading wireless channels. Currently, a technical in-depth book on this subject, which has a similar detailed exposure of the recent advances in CDMA, M-ary CDMA and MC-CDMA, is unavailable. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into five main parts: Part I – provides a detailed introduction to the subject of CDMA systems designed for employment in various application Part II – deals with the currently hot topic of genetic algorithm assisted multiuser detection Part III – gives a detailed account of new, reduced-complexity M-ary CDMA schemes Part IV – considers a range of novel MC-CDMA schemes which have the potential of supporting numerous design objectives Part V – provides an overview of the 3G wireless system proposals and characterises the expected network capacity gains attained with the aid of adaptive CDMA systems By providing an all-encompassing self-contained treatment this groundbreaking volume will have appeal to researchers, postgraduate students, academics practising research and development engineers working for wireless communications and computer networking companies, as well as senior undergraduate students and technical managers in the field.

Single- and Multi-Carrier DS-CDMA: Multi-USer Detection, Space-Time Spreading, Synchronisation, Standards and Networking

From the Publisher:
This volume is dedicated to a range of CDMA and MC-CDMA transmission aspects of systems designed for communicating over fading wireless channels.
Currently, a technical in-depth book on this subject, which has a similar detailed exposure of the recent advances in CDMA, M-ary CDMA and MC-CDMA, is unavailable. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context.
Divided into five main parts:
Part I  provides a detailed introduction to the subject of CDMA systems designed for employment in various application
Part II  deals with the currently hot topic of genetic algorithm assisted multiuser detection
Part III  gives a detailed account of new, reduced-complexity M-ary CDMA schemes
Part IV  considers a range of novel MC-CDMA schemes which have the potential of supporting numerous design objectives
Part V  provides an overview of the 3G wireless system proposals and characterises the expected network capacity gains attained with the aid of adaptive CDMA systems
By providing an all-encompassing self-contained treatment this groundbreaking volume will have appeal to researchers, postgraduate students, academics practising research and development engineers working for wireless communications and computer networking companies, as well as senior undergraduate students and technical managers in the field.

Single and Multi-Carrier CDMA: Multi-User Detection, Space-Time Spreading, Synchronisation and Standards

This chapter contains sections titled: Introduction Residue Number System Transform and Its Inverse Redundant Residue Number System Error-detection and Error-correction in RRNS Chapter Summary and Conclusion ]]>

E-L. Kuan

Papers

Overview of Multicarrier CDMA

Single- and Multi-Carrier DS-CDMA: Multi-USer Detection, Space-Time Spreading, Synchronisation, Standards and Networking

Single and Multi-Carrier CDMA: Multi-User Detection, Space-Time Spreading, Synchronisation and Standards

Residue Number System Arithmetic

SpaceTime Spreading Aided SingleCarrier Wideband CDMA Communicating over Multipath Nakagami Fading Channels