A new energy paradigm, consisting of greater reliance on renewable energy sources and increased concern for energy effi ciency in the total energy lifecycle, has accelerated research into energy-related technologies. Due to their ubiquity, magnetic materials play an important role in improving the effi ciency and performance of devices in electric power generation, conditioning, conversion, transportation, and other energy-use sectors of the economy. This review focuses on the state-of-the-art hard and soft magnets and magnetocaloric materials, with an emphasis on their optimization for energy applications. Specifi cally, the impact of hard magnets on electric motor and transportation technologies, of soft magnetic materials on electricity generation and conversion technologies, and of magnetocaloric materials for refrigeration technologies, are discussed. The synthesis, characterization, and property evaluation of the materials, with an emphasis on structure‐property relationships, are discussed in the context of their respective markets, as well as their potential impact on energy effi ciency. Finally, considering future bottlenecks in raw materials, options for the recycling of rare-earth intermetallics for hard magnets will be discussed.

/pdf/magnetic-materials-and-devices-for-the-21st-century-stronger-xvi5miqu1p.pdf

Magnetic materials and devices for the 21st century: Stronger, lighter, and more energy efficient

This paper presents the latest comprehensive literature review of AC and DC microgrid (MG) systems in connection with distributed generation (DG) units using renewable energy sources (RESs), energy storage systems (ESS) and loads. A survey on the alternative DG units' configurations in the low voltage AC (LVAC) and DC (LVDC) distribution networks with several applications of microgrid systems in the viewpoint of the current and the future consumer equipments energy market is extensively discussed. Based on the economical, technical and environmental benefits of the renewable energy related DG units, a thorough comparison between the two types of microgrid systems is provided. The paper also investigates the feasibility, control and energy management strategies of the two microgrid systems relying on the most current research works. Finally, the generalized relay tripping currents are derived and the protection strategies in microgrid systems are addressed in detail. From this literature survey, it can be revealed that the AC and DC microgrid systems with multiconverter devices are intrinsically potential for the future energy systems to achieve reliability, efficiency and quality power supply.

AC-microgrids versus DC-microgrids with distributed energy resources: A review

Renewable energy sources like wind energy are copiously available without any limitation. Wind turbines are used to tap the potential of wind energy, which is available in millions of MW. Reliability of wind turbine is critical to extract this maximum amount of energy from the wind. We reviewed different techniques, methodologies and algorithms developed to monitor the performance of wind turbine as well as for an early fault detection to keep away the wind turbines from catastrophic conditions due to sudden breakdowns. To keep the wind turbine in operation, implementation of condition monitoring system (CMS) and fault detection system (FDS) is paramount and for this purpose ample knowledge of these two types of systems is mandatory. So, an attempt has been made in this direction to review maximum approaches related to CMS and FDS in this piece of writing.

Condition monitoring and fault detection of wind turbines and related algorithms: A review

The non-combustion based renewable electricity generation technologies were assessed against a range of sustainability indicators and using data obtained from the literature. The indicators used to assess each technology were price of generated electricity, greenhouse gas emissions during full life cycle of the technology, availability of renewable sources, efficiency of energy conversion, land requirements, water consumption and social impacts. The cost of electricity, greenhouse gas emissions and the efficiency of electricity generation were found to have a very wide range for each technology, mainly due to variations in technological options as well as geographical dependence of each renewable energy source. The social impacts were assessed qualitatively based on the major individual impacts discussed in literature. Renewable energy technologies were then ranked against each indicator assuming that indicators have equal importance for sustainable development. It was found that wind power is the most sustainable, followed by hydropower, photovoltaic and then geothermal. Wind power was identified with the lowest relative greenhouse gas emissions, the least water consumption demands and with the most favourable social impacts comparing to other technologies, but requires larger land and has high relative capital costs.

/pdf/assessment-of-sustainability-indicators-for-renewable-energy-15v882jasq.pdf

Assessment of sustainability indicators for renewable energy technologies

Renewable energy sources have gained much attention due to the recent energy crisis and the urge to get clean energy. Among the main options being studied, wind energy is a strong contender because of its reliability due to the maturity of the technology, good infrastructure and relative cost competitiveness. In order to harvest wind energy more efficiently, the size of wind turbines has become physically larger, making maintenance and repair works difficult. In order to improve safety considerations, to minimize down time, to lower the frequency of sudden breakdowns and associated huge maintenance and logistic costs and to provide reliable power generation, the wind turbines must be monitored from time to time to ensure that they are in good condition. Among all the monitoring systems, the structural health monitoring (SHM) system is of primary importance because it is the structure that provides the integrity of the system. SHM systems and the related non-destructive test and evaluation methods are discussed in this review. As many of the methods function on local damage, the types of damage that occur commonly in relation to wind turbines, as well as the damage hot spots, are also included in this review.

https://iopscience.iop.org/article/10.1088/0957-0233/19/12/122001/pdf

Structural health monitoring for a wind turbine system: a review of damage detection methods

Energy is an essential ingredient of socio-economic development and economic growth. Renewable energy sources like wind energy is indigenous and can help in reducing the dependency on fossil fuels. Wind is the indirect form of solar energy and is always being replenished by the sun. Wind is caused by differential heating of the earth's surface by the sun. It has been estimated that roughly 10 million MW of energy are continuously available in the earth's wind. Wind energy provides a variable and environmental friendly option and national energy security at a time when decreasing global reserves of fossil fuels threatens the long-term sustainability of global economy. This paper reviews the wind resources assessment models, site selection models and aerodynamic models including wake effect. The different existing performance and reliability evaluation models, various problems related to wind turbine components (blade, gearbox, generator and transformer) and grid for wind energy system have been discussed. This paper also reviews different techniques and loads for design, control systems and economics of wind energy conversion system.

A review of wind energy technologies

This paper is a modest attempt to study the growth and performance of wind farms in India. India occupies the 5th place in the world in wind energy generation after Germany, the USA, Denmark and Spain, and has an installed capacity of more than 2485 MW of wind energy, comprising both commercial projects (2418 MW) and demonstration projects (65.415 MW) as of 31 March 2004. This paper discusses the progress mode, wind resource assessment, technological development, environmental benefits and economics in the area of wind energy and also the policies of wind power development in India. It also deals with the performance and Pareto analysis of the wind farm located at Muppandal (in the southern part of India), with an installed capacity of 16.525 MW. It consists of 53 Wind Electric Generators (WEGs).

E. Sreevalsan

Papers

A review of wind energy technologies

Prospects of wind energy in India