1.1 Introduction to Pd-catalyzed directed C–H functionalization
The development of methods for the direct conversion of carbon–hydrogen bonds into carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon bonds remains a critical challenge in organic chemistry. Mild and selective transformations of this type will undoubtedly find widespread application across the chemical field, including in the synthesis of pharmaceuticals, natural products, agrochemicals, polymers, and feedstock commodity chemicals. Traditional approaches for the formation of such functional groups rely on pre-functionalized starting materials for both reactivity and selectivity. However, the requirement for installing a functional group prior to the desired C–O, C–X, C–N, C–S, or C–C bond adds costly chemical steps to the overall construction of a molecule. As such, circumventing this issue will not only improve atom economy but also increase the overall efficiency of multi-step synthetic sequences.

Direct C–H bond functionalization reactions are limited by two fundamental challenges: (i) the inert nature of most carbon-hydrogen bonds and (ii) the requirement to control site selectivity in molecules that contain diverse C–H groups. A multitude of studies have addressed the first challenge by demonstrating that transition metals can react with C–H bonds to produce C–M bonds in a process known as “C–H activation”.1 The resulting C–M bonds are far more reactive than their C–H counterparts, and in many cases they can be converted to new functional groups under mild conditions.

The second major challenge is achieving selective functionalization of a single C–H bond within a complex molecule. While several different strategies have been employed to address this issue, the most common (and the subject of the current review) involves the use of substrates that contain coordinating ligands. These ligands (often termed “directing groups”) bind to the metal center and selectively deliver the catalyst to a proximal C–H bond. Many different transition metals, including Ru, Rh, Pt, and Pd, undergo stoichiometric ligand-directed C–H activation reactions (also known as cyclometalation).2,3 Furthermore, over the past 15 years, a variety of catalytic carbon-carbon bond-forming processes have been developed that involve cyclometalation as a key step.1b–d,4

The current review will focus specifically on ligand-directed C–H functionalization reactions catalyzed by palladium. Palladium complexes are particularly attractive catalysts for such transformations for several reasons. First, ligand-directed C–H functionalization at Pd centers can be used to install many different types of bonds, including carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon linkages. Few other catalysts allow such diverse bond constructions,5,6,7 and this versatility is predominantly the result of two key features: (i) the compatibility of many PdII catalysts with oxidants and (ii) the ability to selectively functionalize cyclopalladated intermediates. Second, palladium participates in cyclometalation with a wide variety of directing groups, and, unlike many other transition metals, promotes C–H activation at both sp2 and sp3 C–H sites. Finally, the vast majority of Pd-catalyzed directed C–H functionalization reactions can be performed in the presence of ambient air and moisture, making them exceptionally practical for applications in organic synthesis.

While several accounts have described recent advances, this is the first comprehensive review encompassing the large body of work in this field over the past 5 years (2004–2009). Both synthetic applications and mechanistic aspects of these transformations are discussed where appropriate, and the review is organized on the basis of the type of bond being formed.

/pdf/palladium-catalyzed-ligand-directed-c-h-functionalization-4pc4c7r0ac.pdf

Palladium-Catalyzed Ligand-Directed C−H Functionalization Reactions

Catalytic dehydrogenative cross-coupling: forming carbon-carbon bonds by oxidizing two carbon-hydrogen bonds

The biaryl structural motif is a predominant feature in many pharmaceutically relevant and biologically active compounds. As a result, for over a century 1 organic chemists have sought to develop new and more efficient aryl -aryl bond-forming methods. Although there exist a variety of routes for the construction of aryl -aryl bonds, arguably the most common method is through the use of transition-metalmediated reactions. 2-4 While earlier reports focused on the use of stoichiometric quantities of a transition metal to carry out the desired transformation, modern methods of transitionmetal-catalyzed aryl -aryl coupling have focused on the development of high-yielding reactions achieved with excellent selectivity and high functional group tolerance under mild reaction conditions. Typically, these reactions involve either the coupling of an aryl halide or pseudohalide with an organometallic reagent (Scheme 1), or the homocoupling of two aryl halides or two organometallic reagents. Although a number of improvements have developed the former process into an industrially very useful and attractive method for the construction of aryl -aryl bonds, the need still exists for more efficient routes whereby the same outcome is accomplished, but with reduced waste and in fewer steps. In particular, the obligation to use coupling partners that are both activated is wasteful since it necessitates the installation and then subsequent disposal of stoichiometric activating agents. Furthermore, preparation of preactivated aryl substrates often requires several steps, which in itself can be a time-consuming and economically inefficient process.

http://aether.cmi.ua.ac.be/artikels/Artikels%20Gitte/Artikels/Reviews/Heck-Type-lautens.pdf

Aryl-aryl bond formation by transition-metal-catalyzed direct arylation.

The area of transition-metal-catalyzed direct arylation through cleavage of CH bonds has undergone rapid development in recent years, and is becoming an increasingly viable alternative to traditional cross-coupling reactions with organometallic reagents In particular, palladium and ruthenium catalysts have been described that enable the direct arylation of (hetero)arenes with challenging coupling partners—including electrophilic aryl chlorides and tosylates as well as simple arenes in cross-dehydrogenative arylations Furthermore, less expensive copper, iron, and nickel complexes were recently shown to be effective for economically attractive direct arylations

Transition-metal-catalyzed direct arylation of (hetero)arenes by C-H bond cleavage.

The direct functionalization of C-H bonds in organic compounds has recently emerged as a powerful and ideal method for the formation of carbon-carbon and carbon-heteroatom bonds. This Review provides an overview of C-H bond functionalization strategies for the rapid synthesis of biologically active compounds such as natural products and pharmaceutical targets.

C-H bond functionalization: emerging synthetic tools for natural products and pharmaceuticals

C-C, C-O, C-N bond formation on sp2 carbon by Pd(II)-catalyzed reactions involving oxidant agents.

Indole 2-carboxamide derivatives 4 underwent palladium-catalyzed intramolecular cyclization reactions to afford β-carbolinones or pyrazino[1,2-a]indoles according to different reaction pathways. The complete regioselectivity of the reactions was obtained in different reaction conditions.

Regioselectivity on the palladium-catalyzed intramolecular cyclization of indole derivatives.

Direct synthesis of 2-substituted 5-oxazolecarbaldehydes was performed by intramolecular reaction of propargylamides through treatment with a catalytic amount of Pd(II) salts in the presence of a stoichiometric amount of reoxidant agent The heterocyclization process was well-tolerated by a wide range of aryl, heteroaryl, and alkyl propargylamides This protocol constitutes a valuable synthetic pathway to 5-oxazolecarbaldehydes, alternative to the formylation on oxazole rings, often unsatisfactory in term of regioselectivity and yields

Intramolecular Pd(II)-catalyzed cyclization of propargylamides: straightforward synthesis of 5-oxazolecarbaldehydes.

This review highlights the development of palladium-catalyzed C–H and N–H functionalization reactions involving indole derivatives. These procedures require unactivated starting materials and are respectful of the basic principle of sustainable chemistry tied to atom economy.

https://www.beilstein-journals.org/bjoc/content/pdf/1860-5397-8-198.pdf

Palladium-catalyzed dual C-H or N-H functionalization of unfunctionalized indole derivatives with alkenes and arenes.

A divergent synthesis of quinazolin-4-ones and 1,4-benzodiazepin-5-ones by Pd(II)-catalyzed intramolecular amination of tosylated N-allyl-anthranilamides is described. Both kinds of products were available in high yields depending on the different reaction conditions.

Egle M. Beccalli

Papers

C-C, C-O, C-N bond formation on sp2 carbon by Pd(II)-catalyzed reactions involving oxidant agents.

Regioselectivity on the palladium-catalyzed intramolecular cyclization of indole derivatives.

Intramolecular Pd(II)-catalyzed cyclization of propargylamides: straightforward synthesis of 5-oxazolecarbaldehydes.

Palladium-catalyzed dual C-H or N-H functionalization of unfunctionalized indole derivatives with alkenes and arenes.

Regioselective formation of six- and seven-membered ring by intramolecular Pd-catalyzed amination of N-allyl-anthranilamides.