1. Introduction. 1.1 Background. 1.2 Electrical Transmission Networks. 1.3 Conventional Control Mechanisms. 1.4 Flexible ac Transmission Systems (FACTS). 1.5 Emerging Transmission Networks. 2. Reactor--Power Control in Electrical Power Transmission Systems. 2.1 Reacrive Power. 2.2 Uncompensated Transmission Lines. 2.3 Passive Compensation. 2.4 Summary. 3. Principles of Conventional Reactive--Power Compensators. 3.1 Introduction. 3.2 Synchronous Condensers. 3.3 The Saturated Reactor (SR). 3.4 The Thyristor--Controlled Reactor (TCR). 3.5 The Thyristor--Controlled Transformer (TCT). 3.6 The Fixed Capacitor--Thyristor--Controlled Reactor (FC--TCR). 3.7 The Mechanically Switched Capacitor--Thristor--Controlled Reactor (MSC--TCR). 3.8 The Thyristor--Switched capacitor and Reactor. 3.9 The Thyristor--Switched capacitor--Thyristor--Controlled Reactor (TSC--TCR). 3.10 A Comparison of Different SVCs. 3.11 Summary. 4. SVC Control Components and Models. 4.1 Introduction 4.2 Measurement Systems. 4.3 The Voltage Regulator. 4.4 Gate--Pulse Generation. 4.5 The Synchronizing System. 4.6 Additional Control and Protection Functions. 4.7 Modeling of SVC for Power--System Studies. 4.8 Summary. 5. Conceepts of SVC Voltage Control. 5.1 Introduction 5.2 Voltage Control. 5.3 Effect of Network Resonances on the Controller Response. 5.4 The 2nd Harmonic Interaction Between the SVC and ac Network. 5.5 Application of the SVC to Series--Compensated ac Systems. 5.6 3rd Harmonic Distortion. 5.7 Voltage--Controlled Design Studies. 5.8 Summary. 6. Applications. 6.1 Introduction. 6.2 Increase in Steady--State Power--Transfer Capacity. 6.3 Enhancement of Transient Stability. 6.4 Augmentation of Power--System Damping. 6.5 SVC Mitigation of Subsychronous Resonance (SSR). 6.6 Prevention of Voltage Instability. 6.7 Improvement of HVDC Link Performance. 6.8 Summary. 7. The Thyristor--Controlled SeriesCapacitor (TCSC). 7.1 Series Compensation. 7.2 The TCSC Controller. 7.3 Operation of the TCSC. 7.4 The TSSC. 7.5 Analysis of the TCSC. 7.6 Capability Characteristics. 7.7 Harmonic Performance. 7.8 Losses. 7.9 Response of the TCSC. 7.10 Modeling of the TCSC. 7.11 Summary. 8. TCSC Applications. 8.1 Introduction. 8.2 Open--Loop Control. 8.3 Closed--Loop Control. 8.4 Improvement of the System--Stability Limit. 8.5 Enhancement of System Damping. 8.6 Subsynchronous Resonanace (SSR) Mitigation. 8.7 Voltage--Collapse Prevention. 8.8 TCSC Installations. 8.9 Summary. 9. Coordination of FACTS Controllers. 9.1 Introduction 9.2 Controller Interactions. 9.3 SVC--SVC Interaction. 9.4 SVC--HVDC Interaction. 9.5 SVC--TCSC Interaction. 9.6 TCSC--TCSC Interaction. 9.7 Performance Criteria for Damping--Controller Design. 9.8 Coordination of Multiple Controllers Using Linear--Control Techniques. 9.9 Coordination of Multiple Controllers using Nonlinear--Control Techniques. 9.10 Summary. 10. Emerging FACTS Controllers. 10.1 Introduction. 10.2 The STATCOM. 10.3 THE SSSC. 10.4 The UPFC. 10.5 Comparative Evaluation of Different FACTS Controllers. 10.6 Future Direction of FACTS Technology. 10.7 Summary. Appendix A. Design of an SVC Voltage Regulator. A.1 Study System. A.2 Method of System Gain. A.3 Elgen Value Analysis. A.4 Simulator Studies. A.5 A Comparison of Physical Simulator results With Analytical and Digital Simulator Results Using Linearized Models. Appendix B. Transient--Stability Enhancement in a Midpoint SVC--Compensated SMIB System. Appendix C. Approximate Multimodal decomposition Method for the Design of FACTS Controllers. C.1 Introduction. C.2 Modal Analysis of the ith Swing Mode, C.3 Implications of Different Transfer Functions. C.4 Design of the Damping Controller. Appendix D. FACTS Terms and Definitions. Index.

Thyristor-Based Facts Controllers for Electrical Transmission Systems

A surface cleaning apparatus comprises a body including a rear compartment, a forward compartment and an intermediate compartment arranged between the rear and forward compartments. An elongate rotatable brush arrangement is positioned within and extends across the forward compartment. An electric motor is positioned in the rear compartment, and drive means extends between the rotatable brush arrangement and the electric motor.

Surface cleaning apparatus

The design of controllers sited in the transmission network for damping interarea power oscillations requires several types of analytical tools and field verification methods. Probably the most important aspect of such control design is the selection of proper feedback measurements from the network. This paper describes concepts which provide design engineers with the insight to control performance and the understanding needed to ensure the secure operation of the bulk transmission system. Specific attention is directed to procedures for selecting feedback signals. >

Concepts for design of FACTS controllers to damp power swings

Recently, sustained power oscillation at subsynchronous frequency was captured in direct-drive permanent magnetic synchronous generator (PMSG) based wind farms in Xinjiang Uygur Autonomous Region, China. This new type of subsynchronous interaction (SSI) detected in practical systems has never been reported and analyzed before. Therefore, its mechanism and characteristics are not yet clearly clarified. In this paper, a simplified but representative system model with multiple PMSGs interfaced with AC networks is established first based on the actual system and the PMSG model provided by the manufacturer. Then, small-signal eigenanalysis, time-domain simulation, and impedance model analysis are carried out to investigate the interactive dynamics between them. The results show that such interaction between direct-drive PMSG wind farms and weak ac grids characterized by low short-circuit ratio would cause negative-resistance effect for the SSI mode, leading to unstable oscillation. In such cases, the controller of PMSG would saturate soon, resulting in sustained power oscillation in the system. If unfortunately the oscillation frequency matches the torsional mode of any nearby turbogenerator, severe torsional vibration would be excited on the shaft of the latter. The analysis results are finally validated with field measurements of an actual SSI event. To address the problem, a supplementary subsynchronous damping control loop is attached to the controllers of PMSGs to reshape the impedance and thus to stabilize the SSI.

Subsynchronous Interaction Between Direct-Drive PMSG Based Wind Farms and Weak AC Networks

Since the publication of the original paper on power system stability definitions in 2004, the dynamic behavior of power systems has gradually changed due to the increasing penetration of converter interfaced generation technologies, loads, and transmission devices. In recognition of this change, a Task Force was established in 2016 to re-examine and extend, where appropriate, the classic definitions and classifications of the basic stability terms to incorporate the effects of fast-response power electronic devices. This paper based on an IEEE PES report summarizes the major results of the work of the Task Force and presents extended definitions and classification of power system stability.

/pdf/definition-and-classification-of-power-system-stability-4ax5238q5q.pdf

Definition and Classification of Power System Stability – Revisited & Extended

Thyristor-controlled series compensation (TCSC) is expected to be applied in transmission systems to achieve a number of benefits. To ensure best use of this new controller, planning engineers require analysis capability tailored to the specific performance characteristics of the TCSC. This paper presents a model for TCSC which is applicable for typical transient and oscillatory stability studies. Also included is a discussion on relevant information to extend the modeling detail of the TCSC for use with long-term stability analysis. >

A thyristor controlled series compensation model for power system stability analysis

Frequency-scan approaches for conducting Sub-Synchronous Control Interaction (SSCI) studies of wind farms is becoming a normal practice in the industry. Modern power electronics control used in many wind generators has a characteristic that couples two frequency components, similar to saliency effects of conventional generators. As a consequence, treating both wind farm and grid as single-dimension impedances could generate an inaccurate result. This paper describes a two-dimension transfer function approach that can be practically applied to ensure accuracy when evaluating SSCI aspects of power-electronic equipment such as renewable generation.

A Refined Frequency Scan Approach to Sub-Synchronous Control Interaction (SSCI) Study of Wind Farms

A method and apparatus for controlling a battery energy storage system of the type in which an inverter is coupled to convert direct current power from a DC source to a controlled frequency AC power suitable for supplementing utility power or for replacing utility power includes a control mechanism for operating the system and either a supplemental or replacement mode in parallel with a utility power system. The system favors frequency control over power control and maintains constant monitoring of frequency output with adjustment of power in response to any frequency shift of the inverter output. The system also includes apparatus for determining a power error signal based upon commanded power output in which the power error signal is applied as a phase shift control signal in the frequency control circuit for regulating the real component of power supplied by the inverter. In one form, the system is illustrated as multiple, parallel connected power control systems coupled to a common DC source for supplying a common AC output and each of the power control systems are regulated in response to the reactive component of power supplied therefrom so as to promote load sharing between the separate power control systems.

Battery energy storage power conditioning system

An active power line conditioner circuit having a series compensation system arrangement utilizes a transformer-coupled three-phase voltage-source inverter. A conventional metal oxide varistor (MOV) and bypass breaker combination are provided on the line side of the coupling transformer. A solid-state thyristor shorting ("crowbar") switch is provided on the secondary side of the coupling transformer across the outputs of the three-phase voltage-source inverter (VSI). The crowbar switch circuitry utilizes a diode bridge with a thyristor on the dc side of the bridge resulting in the simplification that only one active device need be gated. Crowbar switching logic activates the crowbar switch based on the exceeding of a threshold voltage measured at the dc power source link to the voltage-source inverter. A direct measure of dc source link voltage is employed to determine when to trigger the conduction of the crowbar thyristor switch. The three-phase voltage-source inverter is provided with overcurrent protection circuitry that immediately blocks the active portion of each phase-leg whenever the current exceeds a predetermined level. In an alternative embodiment of the present invention, a thyristor-switched MOV device is provided across the dc source link in parallel with the dc source output and the dc link capacitor for fast switching of slight overcurrents which are passed by the VSI. This allows operation with a dc source voltage close to maximum system ratings, thereby making better utilization of the VSI power electronics.

Apparatus for protection of power-electronics in series compensating systems

This is the fourth supplement to "A bibliography for the Study of Subsynchronous Resonance Between Rotating Machines and Power Systems". This paper includes the published papers in the area of subsynchronous resonance during the time span of February 1990 to end of January 1996.

Einar Vaughn Larsen

Papers

A thyristor controlled series compensation model for power system stability analysis

A Refined Frequency Scan Approach to Sub-Synchronous Control Interaction (SSCI) Study of Wind Farms

Battery energy storage power conditioning system

Apparatus for protection of power-electronics in series compensating systems

Fourth supplement to a bibliography for the study of subsynchronous resonance between rotating machines and power systems