The direct discharge of industrial wastewater into the environment results in serious contamination. Photocatalytic treatment with the application of sunlight and its enhancement by coupling with electrocatalytic degradation offers an inexpensive and green technology enabling the total removal of refractory pollutants such as surfactants, pharmaceuticals, pesticides, textile dyes, and heavy metals, from industrial wastewater. Among metal oxide—semiconductors, cerium dioxide (CeO2) is one of the photocatalysts most commonly applied in pollutant degradation. CeO2 exhibits promising photocatalytic activity. Nonetheless, the position of conduction bands (CB) and valence bands (VB) in CeO2 limits its application as an efficient photocatalyst utilizing solar energy. Its photocatalytic activity in wastewater treatment can be improved by various modification techniques, including changes in morphology, doping with metal cation dopants and non-metal dopants, coupling with other semiconductors, and combining it with carbon supporting materials. This paper presents a general overview of CeO2 application as a single or composite photocatalyst in the treatment of various pollutants. The photocatalytic characteristics of CeO2 and its composites are described. The main photocatalytic reactions with the participation of CeO2 under UV and VIS irradiation are presented. This review summarizes the existing knowledge, with a particular focus on the main experimental conditions employed in the photocatalytic and photoelectrocatalytic degradation of various pollutants with the application of CeO2 as a single and composite photocatalyst.

A CeO2 Semiconductor as a Photocatalytic and Photoelectrocatalytic Material for the Remediation of Pollutants in Industrial Wastewater: A Review

Fundamentals and applications of photoelectrocatalysis as an efficient process to remove pollutants from water: A review.

This contribution presents the biosynthesis, physiochemical properties, toxicity and photocatalytic activity of biogenic CeO2 NPs using, for the first time, marine oyster extract as an effective and rich source of bioreducing and capping/stabilizing agents in a one-pot recipe. CeO2 NPs formation was initially confirmed through the color change from light green to pale yellow and subsequently, their corresponding absorption peak was spectroscopically determined at 310 nm with an optical band-gap of 4.67 eV using the DR-UV technique. Further, XRD and Raman analyses indicated that nanoceria possessed face-centered cubic arrangements without any impurities, having an average crystallite size of 10 nm. TEM and SEM results revealed that biogenic CeO2 NPs was approximately spherical in shape with a median particle size of 15 ± 1 nm. The presence of various bioorganic substances on the surface of nanoparticles was deduced by FTIR and TGA results. It is found that marine-based nanoceria shows no cytotoxic effect on the normal cell, thus indicating their enhanced biocompatibility and biosafety to living organisms. Environmentally, due to energy band gap, visible light-activated CeO2 nanocatalyst revealed superior photocatalytic performance on degradation of methylene blue pollutant with removal rate of 99%. Owing to the simplicity, cost-effectiveness, and environmentally friendly nature, this novel marine biosynthetic route paves the way for prospective applications of nanoparticles in various areas.

Enhanced sunlight photocatalytic activity and biosafety of marine-driven synthesized cerium oxide nanoparticles.

Photocatalytic and Photoelectrocatalytic Water Splitting by Porous g-C3N4 Nanosheets for Hydrogen Generation

Photoelectrocatalysis as a high-efficiency platform for pulping wastewater treatment and energy production

Industrial sources of environmental pollution generate huge amounts of industrial wastewater containing various recalcitrant organic and inorganic pollutants that are hazardous to the environment. On the other hand, industrial wastewater can be regarded as a prospective source of fresh water, energy, and valuable raw materials. Conventional sewage treatment systems are often not efficient enough for the complete degradation of pollutants and they are characterized by high energy consumption. Moreover, the chemical energy that is stored in the wastewater is wasted. A solution to these problems is an application of photoelectrocatalytic treatment methods, especially when they are coupled with energy generation. The paper presents a general overview of the semiconductor materials applied as photoelectrodes in the treatment of various pollutants. The fundamentals of photoelectrocatalytic reactions and the mechanism of pollutants treatment as well as parameters affecting the treatment process are presented. Examples of different semiconductor photoelectrodes that are applied in treatment processes are described in order to present the strengths and weaknesses of the photoelectrocatalytic treatment of industrial wastewater. This overview is an addition to the existing knowledge with a particular focus on the main experimental conditions employed in the photoelectrocatalytic degradation of various pollutants with the application of semiconductor photoelectrodes.

https://www.mdpi.com/2073-4344/10/4/439/pdf

Elzbieta Kusmierek

Papers

A CeO2 Semiconductor as a Photocatalytic and Photoelectrocatalytic Material for the Remediation of Pollutants in Industrial Wastewater: A Review

Semiconductor Electrode Materials Applied in Photoelectrocatalytic Wastewater Treatment—an Overview