Euridike-Emmy Delyannis

TL;DR: Theoretical principles of thermal processes and monographs on water treatment include Theoretical Principles of Thermal Processes [1], Reagentless Methods of Water Treatment in Power Plants [2], Engineering Technological and Chemical Methods of Cooling Water treatment in Industry and Power Plants: Fresh Water, Seawater, Brackish Water as mentioned in this paper.

TL;DR: In this paper, the most important membrane configurations (tube, hollow-fiber, and spiral-wound modules) equations are given for describing their transfer characteristics, and the equations for calculating flows and concentrations at membranes can only be solved iteratively.

TL;DR: An empirical modeling method has been suggested for the reverse osmosis process as mentioned in this paper, which can readily be used to model other available membrane configurations and solute-water systems and allows its use in scale-up, process optimization and economic studies of the reverse-osmosis process, and a correlational dependecne, which determines the relative value of the coordination number of solution-component hydration, was derived by using experimental data of reverse-OSmosis separation of multicomponent aqueous concentrated solutions.

TL;DR: In this article, the authors present the following properties of seawater: 1. Physical Properties of Seawater: Activity and osmotic coefficients.- Conductance, Density, Electrical conductivity, and electrical conductivity.

TL;DR: In this article, the corrosion rate of mild steel was investigated in simulated seawater desalination at ambient temperature to 120° and varying pH and oxygen concentrations, showing that sulfide impurities in seawater became corrosion stimulators only at pH <7, but were highly active even in the ppm range, adding 1 ppm Cu-ion provided considerable stimulation also.