The carrier collection efficiency (ηc) and energy conversion efficiency (ηe) of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives. Composite films of poly(2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) and fullerenes exhibit ηc of about 29 percent of electrons per photon and ηe of about 2.9 percent, efficiencies that are better by more than two orders of magnitude than those that have been achieved with devices made with pure MEH-PPV. The efficient charge separation results from photoinduced electron transfer from the MEH-PPV (as donor) to C60 (as acceptor); the high collection efficiency results from a bicontinuous network of internal donor-acceptor heterojunctions.

/pdf/polymer-photovoltaic-cells-enhanced-efficiencies-via-a-2lwj3yarfe.pdf

Polymer photovoltaic cells : enhanced efficiencies via a network of internal donor-acceptor heterojunctions

This Review summarizes recent progress in the development of polymer solar cells. It covers the scientific origins and basic properties of polymer solar cell technology, material requirements and device operation mechanisms, while also providing a synopsis of major achievements in the field over the past few years. Potential future developments and the applications of this technology are also briefly discussed.

Polymer solar cells

-phenylenevinylene)s L4. Fluorene-Based Conjugated Polymers L4.1. Fluorene-Based Copolymers ContainingElectron-Rich MoietiesM4.2. Fluorene-Based Copolymers ContainingElectron-Deﬁcient MoietiesN4.3. Fluorene-Based Copolymers ContainingPhosphorescent ComplexesQ5. Carbazole-Based Conjugated Polymers R5.1. Poly(2,7-carbazole)-Based Polymers R5.2. Indolo[3,2-

https://ir.nctu.edu.tw:443/bitstream/11536/6508/1/000271856900020.pdf

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

Solution-processed bulk-heterojunction solar cells have gained serious attention during the last few years and are becoming established as one of the future photovoltaic technologies for low-cost power production. This article reviews the highlights of the last few years, and summarizes today's state-of-the-art performance. An outlook is given on relevant future materials and technologies that have the potential to guide this young photovoltaic technology towards the magic 10% regime. A cost model supplements the technical discussions, with practical aspects any photovoltaic technology needs to fulfil, and answers to the question as to whether low module costs can compensate lower lifetimes and performances.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.200801283

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

We describe the synthesis and complete characterization of soluble derivatives of C-60 for applications to physics and biology. The goal of the strategy was to have a ''modular'' approach in order to be able to easily vary a functional group attached indirectly to the cluster. The functionality could be hydrophilic (e.g., histamide) or hydrophobic (e.g., cholestanoxy). The former was prepared for biological studies and the latter for photophysical studies toward improvement of photoinduced electron transfer efficiencies in the fabrication of photodetectors and photodiodes. An important intermediate, a carboxylic acid, was found to be recalcitrant to characterization by the usual mass spectroscopic and elemental analysis techniques. This problem was solved by the use of MALDIMS. The carboxylic acid was easily converted to the key intermediate acid chloride, which in turn was convertible to a large variety of derivatives. Both isomeric forms ([5,6], fulleroid and [6,6], methanofullerene) of the C-61 clusters were prepared. The fulleroid formation could have given rise to a 50:50 mixture of phenyl-over-former pentagon phenyl-over-former hexagon isomers but, remarkably, afforded a 95:5 mixture of these isomers, respectively. The fulleroid and methano-fullerene gave different cyclic voltammograms, with the former being reduced at 34 mV more positive potential than the latter.

F. LePeq

Papers

Preparation and Characterization of Fulleroid and Methanofullerene Derivatives