A 1-D analysis for the prediction of ejector performance at critical-mode operation is carried out in the present study. Constant-pressure mixing is assumed to occur inside the constant-area section of the ejector and the entrained flow at choking condition is analyzed. We also carried out an experiment using 11 ejectors and R141b as the working fluid to verify the analytical results. The test results are used to determine the coefficients, h p, h s, f p and f m defined in the 1-D model by matching the test data with the analytical results. It is shown that the1-D analysis using the empirical coefficients can accurately predict the performance of the ejectors. q 1999 Elsevier Science Ltd and IIR. All rights reserved.

/pdf/a-1-d-analysis-of-ejector-performance-3zxsm6fbeg.pdf

A 1-D analysis of ejector performance

This study presents experimental results obtained from a transcritical R744 system using a refrigerant ejector. The results were compared to that of a conventional system with an expansion valve. For the test conditions considered, the cooling capacity and COP simultaneously improved by up to 8% and 7%, respectively. Experiments were analyzed to quantitatively assess the effects on system performance as a result of changes in basic ejector dimensions such as motive nozzle and diffuser sizing. Small angles of 5° yielded best results for the static pressure recovery of the high-speed two-phase flow entering the diffuser. Experiments confirmed that like in a conventional transcritical R744 system with expansion valve, the high-side pressure control integrated into the ejector could be used to maximize the system performance. Numerical simulation results helped identifying this basic trend. Due to difficulties in the ejector throat pressure measurements, a more practical performance metric was introduced in order to quantify overall ejector efficiencies. According to this definition, the prototype ejector was able to recover up to 14.5% of the throttling losses.

Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation

This paper provides a literature review on ejectors and their applications in refrigeration. A number of studies are grouped and discussed in several topics, i.e. background and theory of ejector and jet refrigeration cycle, performance characteristics, working fluid and improvement of jet refrigerator. Moreover, other applications of an ejector in other types of refrigeration system are also described.

Ejectors: applications in refrigeration technology

Numerical and Experimental Investigations on Supersonic Ejectors

The paper provides the results of a theoretical and experimental study of a steam jet refrigerator. A small-capacity steam jet refrigerator has been tested with boiler temperatures in the range 120–140°C. The experimental data were found to be within 85% of the theoretical values. The experiments showed that choking of the secondary flow in the mixing chamber of the ejector plays an important role in the system performance. Maximum COP was obtained when the ejector was operated at its critical flow condition. Off-design performance characteristics of the system are provided.

F. Lustwerk

Papers

An Investigation of Ejector Design by Analysis and Experiment

Supersonic Diffusers for Wind Tunnels