There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

What will 5G be? What it will not be is an incremental advance on 4G. The previous four generations of cellular technology have each been a major paradigm shift that has broken backward compatibility. Indeed, 5G will need to be a paradigm shift that includes very high carrier frequencies with massive bandwidths, extreme base station and device densities, and unprecedented numbers of antennas. However, unlike the previous four generations, it will also be highly integrative: tying any new 5G air interface and spectrum together with LTE and WiFi to provide universal high-rate coverage and a seamless user experience. To support this, the core network will also have to reach unprecedented levels of flexibility and intelligence, spectrum regulation will need to be rethought and improved, and energy and cost efficiencies will become even more critical considerations. This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.

What Will 5G Be

The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.

Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!

The vision of next generation 5G wireless communications lies in providing very high data rates (typically of Gbps order), extremely low latency, manifold increase in base station capacity, and significant improvement in users’ perceived quality of service (QoS), compared to current 4G LTE networks. Ever increasing proliferation of smart devices, introduction of new emerging multimedia applications, together with an exponential rise in wireless data (multimedia) demand and usage is already creating a significant burden on existing cellular networks. 5G wireless systems, with improved data rates, capacity, latency, and QoS are expected to be the panacea of most of the current cellular networks’ problems. In this survey, we make an exhaustive review of wireless evolution toward 5G networks. We first discuss the new architectural changes associated with the radio access network (RAN) design, including air interfaces, smart antennas, cloud and heterogeneous RAN. Subsequently, we make an in-depth survey of underlying novel mm-wave physical layer technologies, encompassing new channel model estimation, directional antenna design, beamforming algorithms, and massive MIMO technologies. Next, the details of MAC layer protocols and multiplexing schemes needed to efficiently support this new physical layer are discussed. We also look into the killer applications, considered as the major driving force behind 5G. In order to understand the improved user experience, we provide highlights of new QoS, QoE, and SON features associated with the 5G evolution. For alleviating the increased network energy consumption and operating expenditure, we make a detail review on energy awareness and cost efficiency. As understanding the current status of 5G implementation is important for its eventual commercialization, we also discuss relevant field trials, drive tests, and simulation experiments. Finally, we point out major existing research issues and identify possible future research directions.

Next Generation 5G Wireless Networks: A Comprehensive Survey

Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.

Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges

This tutorial presents an overview of the technological advances in millimeter-wave (mm-wave) circuit components, antennas, and propagation that will soon allow 60-GHz transceivers to provide multigigabit per second (multi-Gb/s) wireless communication data transfers in the consumer marketplace. Our goal is to help engineers understand the convergence of communications, circuits, and antennas, as the emerging world of subterahertz and terahertz wireless communications will require understanding at the intersections of these areas. This paper covers trends and recent accomplishments in a wide range of circuits and systems topics that must be understood to create massively broadband wireless communication systems of the future. In this paper, we present some evolving applications of massively broadband wireless communications, and use tables and graphs to show research progress from the literature on various radio system components, including on-chip and in-package antennas, radio-frequency (RF) power amplifiers (PAs), low-noise amplifiers (LNAs), voltage-controlled oscillators (VCOs), mixers, and analog-to-digital converters (ADCs). We focus primarily on silicon-based technologies, as these provide the best means of implementing very low-cost, highly integrated 60-GHz mm-wave circuits. In addition, the paper illuminates characterization techniques that are required to competently design and fabricate mm-wave devices in silicon, and illustrates effects of the 60-GHz RF propagation channel for both in-building and outdoor use. The paper concludes with an overview of the standardization and commercialization efforts for 60-GHz multi-Gb/s devices, and presents a novel way to compare the data rate versus power efficiency for future broadband devices.

http://faculty.poly.edu/~tsr/wp-content/uploads/publications/abstract17.pdf

State of the Art in 60-GHz Integrated Circuits and Systems for Wireless Communications

The spectrum crunch currently experienced by mobile cellular carriers makes the underutilized millimeter-wave frequency spectrum a sensible choice for next-generation cellular communications, particularly when considering the recent advances in low cost sub-terahertz/millimeter-wave complementary metal–oxide semiconductor circuitry. To date, however, little is known on how to design or deploy practical millimeter-wave cellular systems. In this paper, measurements for outdoor cellular channels at 38 GHz were made in an urban environment with a broadband (800-MHz RF passband bandwidth) sliding correlator channel sounder. Extensive angle of arrival, path loss, and multipath time delay spread measurements were conducted for steerable beam antennas of differing gains and beamwidths for a wide variety of transmitter and receiver locations. Coverage outages and the likelihood of outage with steerable antennas were also measured to determine how random receiver locations with differing antenna gains and link budgets could perform in future cellular systems. This paper provides measurements and models that may be used to design future fifth-generation millimeter-wave cellular networks and gives insight into antenna beam steering algorithms for these systems.

Broadband Millimeter-Wave Propagation Measurements and Models Using Adaptive-Beam Antennas for Outdoor Urban Cellular Communications

This paper presents several on-chip antenna structures that may be fabricated with standard CMOS technology for use at millimeter wave frequencies. On-chip antennas for wireless personal area networks (WPANs) promise to reduce interconnection losses and greatly reduce wireless transceiver costs, while providing unprecedented flexibility for device manufacturers. This paper presents the current state of research in on-chip integrated antennas, highlights several pitfalls and challenges for on-chip design, modeling, and measurement, and proposes several antenna structures that derive from the microwave microstrip and amateur radio art. This paper also describes an experimental test apparatus for performing measurements on RFIC systems with on-chip antennas developed at The University of Texas at Austin.

http://www.faculty.poly.edu/~tsr/wp-content/uploads/CV/ICP/2009-12-On-Chip%20Integrated%20Antenna%20Structures%20in%20CMOS%20for%2060%20GHz%20WPAN%20Systems.pdf

On-chip integrated antenna structures in CMOS for 60 GHz WPAN systems

We present several on-chip antenna structures that may be fabricated with standard CMOS technology for use at millimeter wave frequencies. On-chip antennas for wireless personal area networks (WPANs) promise to reduce interconnection losses and greatly reduce wireless transceiver costs, while providing unprecedented flexibility for device manufacturers. We present the current state of research in on-chip integrated antennas, highlight several pitfalls and challenges for on-chip design, modeling, and measurement, and propose several antenna structures that derive from the microwave and HF communication fields. We also describe an experimental test apparatus for performing measurements on RFIC systems with on-chip antennas at The University of Texas at Austin.

Felix Gutierrez

Papers

State of the Art in 60-GHz Integrated Circuits and Systems for Wireless Communications

Broadband Millimeter-Wave Propagation Measurements and Models Using Adaptive-Beam Antennas for Outdoor Urban Cellular Communications

On-chip integrated antenna structures in CMOS for 60 GHz WPAN systems

On-Chip Integrated Antenna Structures in CMOS for 60 GHz WPAN Systems

White News: Why Local News Programs Don't Cover People of Color