The Compact Muon Solenoid (CMS) detector is described. The detector operates at the Large Hadron Collider (LHC) at CERN. It was conceived to study proton-proton (and lead-lead) collisions at a centre-of-mass energy of 14 TeV (5.5 TeV nucleon-nucleon) and at luminosities up to 10(34)cm(-2)s(-1) (10(27)cm(-2)s(-1)). At the core of the CMS detector sits a high-magnetic-field and large-bore superconducting solenoid surrounding an all-silicon pixel and strip tracker, a lead-tungstate scintillating-crystals electromagnetic calorimeter, and a brass-scintillator sampling hadron calorimeter. The iron yoke of the flux-return is instrumented with four stations of muon detectors covering most of the 4 pi solid angle. Forward sampling calorimeters extend the pseudo-rapidity coverage to high values (vertical bar eta vertical bar <= 5) assuring very good hermeticity. The overall dimensions of the CMS detector are a length of 21.6 m, a diameter of 14.6 m and a total weight of 12500 t.

/pdf/the-cms-experiment-at-the-cern-lhc-4d2umuzboo.pdf

The CMS experiment at the CERN LHC

We describe likelihood-based statistical tests for use in high energy physics for the discovery of new phenomena and for construction of confidence intervals on model parameters. We focus on the properties of the test procedures that allow one to account for systematic uncertainties. Explicit formulae for the asymptotic distributions of test statistics are derived using results of Wilks and Wald. We motivate and justify the use of a representative data set, called the “Asimov data set”, which provides a simple method to obtain the median experimental sensitivity of a search or measurement as well as fluctuations about this expectation.

/pdf/asymptotic-formulae-for-likelihood-based-tests-of-new-3k1xp8edqf.pdf

Asymptotic formulae for likelihood-based tests of new physics

Monte Carlo simulation is an essential tool in emission tomography that can assist in the design of new medical imaging devices, the optimization of acquisition protocols and the development or assessment of image reconstruction algorithms and correction techniques. GATE, the Geant4 Application for Tomographic Emission, encapsulates the Geant4 libraries to achieve a modular, versatile, scripted simulation toolkit adapted to the field of nuclear medicine. In particular, GATE allows the description of time-dependent phenomena such as source or detector movement, and source decay kinetics. This feature makes it possible to simulate time curves under realistic acquisition conditions and to test dynamic reconstruction algorithms. This paper gives a detailed description of the design and development of GATE by the OpenGATE collaboration, whose continuing objective is to improve, document and validate GATE by simulating commercially available imaging systems for PET and SPECT. Large effort is also invested in the ability and the flexibility to model novel detection systems or systems still under design. A public release of GATE licensed under the GNU Lesser General Public License can be downloaded at http:/www-lphe.epfl.ch/GATE/. Two benchmarks developed for PET and SPECT to test the installation of GATE and to serve as a tutorial for the users are presented. Extensive validation of the GATE simulation platform has been started, comparing simulations and measurements on commercially available acquisition systems. References to those results are listed. The future prospects towards the gridification of GATE and its extension to other domains such as dosimetry are also discussed.

/pdf/gate-a-simulation-toolkit-for-pet-and-spect-i05cuwekfu.pdf

GATE : a simulation toolkit for PET and SPECT

In this paper we describe Herwig++ version 2.3, a general-purpose Monte Carlo event generator for the simulation of hard lepton-lepton, lepton-hadron and hadron-hadron collisions. A number of important hard scattering processes are available, together with an interface via the Les Houches Accord to specialized matrix element generators for additional processes. The simulation of Beyond the Standard Model (BSM) physics includes a range of models and allows new models to be added by encoding the Feynman rules of the model. The parton-shower approach is used to simulate initial- and final-state QCD radiation, including colour coherence effects, with special emphasis on the correct description of radiation from heavy particles. The underlying event is simulated using an eikonal multiple parton-parton scattering model. The formation of hadrons from the quarks and gluons produced in the parton shower is described using the cluster hadronization model. Hadron decays are simulated using matrix elements, where possible including spin correlations and off-shell effects. Comment: 153 pages, program and additional information available from http://projects.hepforge.org/herwig . Updated description to Herwig++ version 2.3 and added one author

/pdf/herwig-physics-and-manual-4sr09wbmek.pdf

Herwig++ Physics and Manual

In this paper we describe Herwig++ version 2.3, a general-purpose Monte Carlo event generator for the simulation of hard lepton-lepton, lepton-hadron and hadron-hadron collisions. A number of important hard scattering processes are available, together with an interface via the Les Houches Accord to specialized matrix element generators for additional processes. The simulation of Beyond the Standard Model (BSM) physics includes a range of models and allows new models to be added by encoding the Feynman rules of the model. The parton-shower approach is used to simulate initial- and final-state QCD radiation, including colour coherence effects, with special emphasis on the correct description of radiation from heavy particles. The underlying event is simulated using an eikonal multiple parton-parton scattering model. The formation of hadrons from the quarks and gluons produced in the parton shower is described using the cluster hadronization model. Hadron decays are simulated using matrix elements, where possible including spin correlations and off-shell effects.

/pdf/herwig-physics-and-manual-2ysstfwnlz.pdf

The ROOT system in an Object Oriented framework for large scale data analysis. ROOT written in C++, contains, among others, an efficient hierarchical OO database, a C++ interpreter, advanced statistical analysis (multi-dimensional histogramming, fitting, minimization, cluster finding algorithms) and visualization tools. The user interacts with ROOT via a graphical user interface, the command line or batch scripts. The command and scripting language is C++ (using the interpreter) and large scripts can be compiled and dynamically linked in. The OO database design has been optimized for parallel access (reading as well as writing) by multiple processes.

/pdf/root-an-object-oriented-data-analysis-framework-s5glsijjfu.pdf

ROOT — An object oriented data analysis framework

The ROOT system in an Object Oriented framework for large scale data analysis. ROOT written in C ++, contains, among others, an efficient hierarchical 00 database, a C ++ interpreter. advanced statistical analysis (multi-dimensional histogramming, fitting, minimization, cluster finding algorithms) and visualization tools. The user interacts with ROOT via a graphical user interface, the command line or batch scripts. The command and scripting language is C + + (using the interpreter) and large scripts can be compiled and dynamically linked in. The 00 database design has been optimized for parallel access (reading as well as writing) by multiple processes.

/pdf/root-an-object-oriented-data-analysis-framework-1qvuuuorgv.pdf

ROOT: an object-oriented data analysis framework

root-project/root: v6.18/02

In this talk we will review the major additions and improvements made to the ROOT system in the last 18 months and present our plans for future developments. The additons and improvements range from modifications to the I/O sub-system to allow users to save and restore objects of classes that have not been instrumented by special ROOT macros, to the addition of a geometry package designed for building, browsing, tracking and visualizing detector geometries. Other improvements include enhancements to the quick analysis sub-system (TTree::Draw()), the addition of classes that allow inter-file object references (TRef, TRefArray), better support for templated and STL classes, amelioration of the Automatic Script Compiler and the incorporation of new fitting and mathematical tools. Efforts have also been made to increase the modularity of the ROOT system with the introduction of more abstract interfaces and the development of a plug-in manager. In the near future, we intend to continue the development of PROOF and its interfacing with GRID environments. We plan on providing an interface between Geant3, Geant4 and Fluka and the new geometry package. The ROOT GUI classes will finally be available on Windows and we plan to release a GUI inspector and builder. In the last year, ROOT has drawn the endorsement of additional experiments and institutions. It is now officially supported by CERN and used as key I/O component by the LCG project.

ROOT Status and Future Developments

In this talk the authors review the major additions and improvements made to the ROOT system in the last 18 months and present their plans for future developments. The additions and improvements range from modifications to the I/O sub-system to allow users to save and restore objects of classes that have not been instrumented by special ROOT macros, to the addition of a geometry package designed for building, browsing, tracking and visualizing detector geometries. Other improvements include enhancements to the quick analysis sub-system (TTree::Draw()), the addition of classes that allow inter-file object references (TRef, TRefArray), better support for templates and STL classes, amelioration of the Automatic Script Compiler and the incorporation of new fitting and mathematical tools. Efforts have also been made to increase the modularity of the ROOT system with the introduction of more abstract interfaces and the development of a plug-in manager. In the near future, they intend to continue the development of PROOF and its interfacing with GRID environments. They plan on providing an interface between Geant3, Geant4 and Fluka and the new geometry package. The ROOT-GUI classes will finally be available on Windows and they plan to release a GUI inspector and builder. In the last year, ROOT has drawn the endorsement of additional experiments and institutions. It is now officially supported by CERN and used as key I/O component by the LCG project.

/pdf/root-status-and-future-developments-4r05pbrn8w.pdf

Fons Rademakers

Papers

ROOT — An object oriented data analysis framework

ROOT: an object-oriented data analysis framework

root-project/root: v6.18/02

ROOT Status and Future Developments

Root status and future developments