Polymer/layered silicate nanocomposites: a review from preparation to processing

https://cyberleninka.org/article/n/1018032.pdf

Polymer nanotechnology: Nanocomposites

A review on polymer–layered silicate nanocomposites

Structural engineering of polyurethane coatings for high performance applications

Nanocomposites, a high performance material exhibit unusual property combinations and unique design possibilities. With an estimated annual growth rate of about 25% and fastest demand to be in engineering plastics and elastomers, their potential is so striking that they are useful in several areas ranging from packaging to biomedical applications. In this unified overview the three types of matrix nanocomposites are presented underlining the need for these materials, their processing methods and some recent results on structure, properties and potential applications, perspectives including need for such materials in future space mission and other interesting applications together with market and safety aspects. Possible uses of natural materials such as clay based minerals, chrysotile and lignocellulosic fibers are highlighted. Being environmentally friendly, applications of nanocomposites offer new technology and business opportunities for several sectors of the aerospace, automotive, electronics and biotechnology industries.

/pdf/nanocomposites-synthesis-structure-properties-and-new-4nejccptqe.pdf

Nanocomposites: synthesis, structure, properties and new application opportunities

Polystyrene−clay nanocomposites have been prepared using a bulk polymerization technique. Three new “onium” salts have been used to prepare the nanocomposites, two are functionalized ammonium salts while the third is a phosphonium salt. By TGA/FTIR, both ammonium and phosphonium treatments have been shown to degrade by a Hofmann elimination mechanism at elevated temperatures. TGA/FTIR showed that the phosphonium treatment is the most thermally stable treatment when compared to the two ammonium salts. The nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, strength and elongation at break, as a measure of the mechanical properties, thermogravimetric analysis, and cone calorimetry. The onset temperature of the degradation is increased by about 50 °C and the peak heat release rate is reduced by 27−58%, depending upon the amount of clay that is present. The mass loss rates are also significantly reduced in the presence of the clay.

Fire Properties of Polystyrene-Clay Nanocomposites

Nanocomposites of polypropylene-graft-maleic anhydride with organically modified clays have been prepared and characterized by X-ray diffraction and transmission electron microscopy. Their combustion behavior has been evaluated using oxygen consumption cone calorimetry. Synergy is observed between the nanocomposite formed and conventional vapor phase fire retardants, such as the combination of decabromodiphenyloxide and antimony oxide. The presence of bromine and antimony does not affect the heat release rate curves of the virgin polymer.

Frank J. Lamelas

Papers

Fire Properties of Polystyrene-Clay Nanocomposites

Fire Retardant Halogen-Antimony-Clay Synergism in Polypropylene Layered Silicate Nanocomposites