A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics

The immediate bonding effectiveness of contemporary adhesives is quite favorable, regardless of the approach used. In the long term, the bonding effectiveness of some adhesives drops dramatically, whereas the bond strengths of other adhesives are more stable. This review examines the fundamental processes that cause the adhesion of biomaterials to enamel and dentin to degrade with time. Non-carious class V clinical trials remain the ultimate test method for the assessment of bonding effectiveness, but in addition to being high-cost, they are time- and labor-consuming, and they provide little information on the true cause of clinical failure. Therefore, several laboratory protocols were developed to predict bond durability. This paper critically appraises methodologies that focus on chemical degradation patterns of hydrolysis and elution of interface components, as well as mechanically oriented test set-ups, such as fatigue and fracture toughness measurements. A correlation of in vitro and in vivo data revealed that, currently, the most validated method to assess adhesion durability involves aging of micro-specimens of biomaterials bonded to either enamel or dentin. After about 3 months, all classes of adhesives exhibited mechanical and morphological evidence of degradation that resembles in vivo aging effects. A comparison of contemporary adhesives revealed that the three-step etch-and-rinse adhesives remain the 'gold standard' in terms of durability. Any kind of simplification in the clinical application procedure results in loss of bonding effectiveness. Only the two-step self-etch adhesives approach the gold standard and do have some additional clinical benefits.

http://www.endoexperience.com/documents/DeMunketalDurabiltyofadhesionJDR.pdf

A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results

To date, 5 different human dental stem/progenitor cells have been isolated and characterized: dental pulp stem cells (DPSCs), stem cells from exfoliated deciduous teeth (SHED), periodontal ligament stem cells (PDLSCs), stem cells from apical papilla (SCAP), and dental follicle progenitor cells (DFPCs). These post-natal populations have mesenchymal-stem-cell-like (MSC) qualities, including the capacity for self-renewal and multilineage differentiation potential. MSCs derived from bone marrow (BMMSCs) are capable of giving rise to various lineages of cells, such as osteogenic, chondrogenic, adipogenic, myogenic, and neurogenic cells. The dental-tissue-derived stem cells are isolated from specialized tissue with potent capacities to differentiate into odontogenic cells. However, they also have the ability to give rise to other cell lineages similar to, but different in potency from, that of BMMSCs. This article will review the isolation and characterization of the properties of different dental MSC-like populations in comparison with those of other MSCs, such as BMMSCs. Important issues in stem cell biology, such as stem cell niche, homing, and immunoregulation, will also be discussed.

Mesenchymal Stem Cells Derived from Dental Tissues vs. Those from Other Sources: Their Biology and Role in Regenerative Medicine

Hygroscopic and hydrolytic effects in dental polymer networks.

http://www.biofilling.com/article/7_2Mineral.pdf

Mineral Trioxide Aggregate: A Comprehensive Literature Review—Part III: Clinical Applications, Drawbacks, and Mechanism of Action

PURPOSE
To evaluate the laboratory long-term effect of various whitening dentifrices on the surface roughness of two brands of resin composite (TPH ST, Filtek Bulk Fill One) using a mechanical toothbrushing simulation.


METHODS
Thirty-two samples each of Filtek and TPH were fabricated in ring molds 10 x 1 mm. Samples were randomly grouped (n=8; four groups), according to dentifrice used; Crest 3D, Optic White, Hello (charcoal), and Aim as control. Samples were brushed in mixed solutions containing deionized water and dentifrice at 150 gf for 10,000x with rotation to ensure uniform brushing. Surface roughness was measured both before (baseline) and after the mechanical toothbrushing simulation using a stylus profilometer. Data collected was compared independently for each treatment using two-way ANOVA and SNK with α< 0.05 for significance.


RESULTS
The data showed that TPH was more susceptible to the abrasive nature of three of the whitening dentifrices tested [Crest 3D, Optic White, and Hello (charcoal) ]. Filtek also exhibited significant susceptibility to the abrasive nature of Hello. Aim showed the least or minimal amount of abrasion.


CLINICAL SIGNIFICANCE
TPH ST composite was more susceptible to the abrasive nature of the three whitening dentifrices tested [Crest 3D, Optic White, and Hello (charcoal)]. Filtek also exhibited significant susceptibility to the abrasive nature of Hello. Aside from the data supporting the clinical efficacy of TPH compared to Filtek, clinicians should inform patients of the abrasive capacity of all whitening dentifrices, especially those that are charcoal based.

Effect of whitening dentifrices on toothbrush abrasion on composites.

Objectives This study aimed to evaluate the effect of aging on the marginal quality of glass hybrid (GH) material used to elevate dentin gingival margins, and to analyze the consistency of the results obtained by 3 in vitro methods. Materials and Methods Ten teeth received compound class II cavities with subgingival margins. The dentin gingival margins were elevated with GH, followed by resin composite. The GH/gingival dentin interfaces were examined through digital microscopy, scanning electron microscopy (SEM) using resin replicas, and according to the World Dental Federation (FDI) criteria. After initial evaluations, all teeth were subjected to 10,000 thermal cycles, followed by repeating the same marginal evaluations and energy dispersive spectroscopy (EDS) analysis for the interfacial zone of 2 specimens. Marginal quality was expressed as the percentage of continuous margin at ×200 for microscopic techniques and as the frequency of each score for FDI ranking. Data were analyzed using the paired sample t-test, Wilcoxon signed-rank test, and Pearson and Spearmen correlation coefficients. Results None of the testing techniques proved the significance of the aging factor. Moderate and strong significant correlations were found between the testing techniques. The EDS results suggested the presence of an ion-exchange layer along the GH/gingival dentin interface of aged specimens. Conclusions The marginal quality of the GH/dentin gingival interface defied aging by thermocycling. The replica SEM and FDI ranking results had stronger correlations with each other than either showed with the digital microscopy results.

Correlation between different methodologies used to evaluate the marginal adaptation of proximal dentin gingival margins elevated using a glass hybrid

espanolEl objetivo de este estudio fue determinar la sorcion y solubilidad de cuatro resinas compuestas: Tetric Ceram (Vivadent), Ecusit (DMG), Degufill (Degussa) y Z-250 (3M-Espe); y dos resinas modificadas con poliacido: Luxat (DMG) e lonosit (DMG). Cinco especimenes circulares (15 mm x 0.85 mm) de cada material fueron preparados y pulidos con discos de carburo de silicio. Los especimenes fueron desecados en una estufa a 37o C hasta que se registro un peso constante (mo) y, posteriormente, se introdujeron en agua destilada a 37o C (m1). Una vez estabilizado su peso fueron desecados nuevamente, colocados en una campana al vacio (60oC, 24 h) y pesados por ultima vez (m2). El calculo de la sorcion (A) y solubilidad (S) se realizo mediante expresiones matematicas interrelacionadas: A = m1-m2/V; S = mo - m2 / V. Los tests de ANOVA y Student Newman Keuls mostraron diferencias en la sorcion y solubilidad segun el material estudiado (p EnglishThe aim of this study was to determine the sorption and solubility of four resin composites: Tetric Ceram (Vivadent), Ecusit (DMG), Degufill (Degussa) and Z-250 (3M-Espe); and two polyacid-modified resins: Luxat (DMG) and lonosit (DMG). Five discs (15 mm x 0.85 mm) of each material were prepared and ground wet to remove poorly polymerized suface layers. Discs were conditioned in a desiccator (37o C) until a constant weight was achieved using an analytic balance (mo); immersed in distilled water 37o C (m1) and finally into a vacuum oven (60o C, 24 h) and reweighted (m2). Sorption (A) and solubility (S) were calculated: A = m1 - m2 / V; S = mo - m2 / V. ANOVA and SNK tests showed statistical differences among the studied materials. lonosit showed the highest sorption and Tetric Ceram and Ecusit the lowest. Luxat presented higher sorption than Degufill, but both materials showed similar sorption values compared with Z-250. The higher solubility was obtained by lonosit. No statistical differences were found among resin composites and Luxat

/pdf/sorcion-y-solubilidad-de-materiales-formulados-con-resina-3ywoixeqqb.pdf

Sorción y solubilidad de materiales formulados con resina

Methods of isolating and using stem cells from neural crest, e.g. periodontal ligament, isolated stem cell and therapeutic cell cultures, and therapeutic applications for a variety of conditions. The cells and cell cultures are especially useful for autologous administration.

Franklin Garcia-Godoy

Papers

Effect of whitening dentifrices on toothbrush abrasion on composites.

Correlation between different methodologies used to evaluate the marginal adaptation of proximal dentin gingival margins elevated using a glass hybrid

Sorción y solubilidad de materiales formulados con resina

Methods of isolating and using stem cells

Restorative dentistry. Preface.