Wetting phenomena are ubiquitous in nature and technology. A solid substrate exposed to the environment is almost invariably covered by a layer of fluid material. In this review, the surface forces that lead to wetting are considered, and the equilibrium surface coverage of a substrate in contact with a drop of liquid. Depending on the nature of the surface forces involved, different scenarios for wetting phase transitions are possible; recent progress allows us to relate the critical exponents directly to the nature of the surface forces which lead to the different wetting scenarios. Thermal fluctuation effects, which can be greatly enhanced for wetting of geometrically or chemically structured substrates, and are much stronger in colloidal suspensions, modify the adsorption singularities. Macroscopic descriptions and microscopic theories have been developed to understand and predict wetting behavior relevant to microfluidics and nanofluidics applications. Then the dynamics of wetting is examined. A drop, placed on a substrate which it wets, spreads out to form a film. Conversely, a nonwetted substrate previously covered by a film dewets upon an appropriate change of system parameters. The hydrodynamics of both wetting and dewetting is influenced by the presence of the three-phase contact line separating "wet" regions from those that are either dry or covered by a microscopic film only. Recent theoretical, experimental, and numerical progress in the description of moving contact line dynamics are reviewed, and its relation to the thermodynamics of wetting is explored. In addition, recent progress on rough surfaces is surveyed. The anchoring of contact lines and contact angle hysteresis are explored resulting from surface inhomogeneities. Further, new ways to mold wetting characteristics according to technological constraints are discussed, for example, the use of patterned surfaces, surfactants, or complex fluids.

/pdf/wetting-and-spreading-56ditqbfmj.pdf

Wetting and Spreading

Electrowetting has become one of the most widely used tools for manipulating tiny amounts of liquids on surfaces. Applications range from 'lab-on-a-chip' devices to adjustable lenses and new kinds of electronic displays. In the present article, we review the recent progress in this rapidly growing field including both fundamental and applied aspects. We compare the various approaches used to derive the basic electrowetting equation, which has been shown to be very reliable as long as the applied voltage is not too high. We discuss in detail the origin of the electrostatic forces that induce both contact angle reduction and the motion of entire droplets. We examine the limitations of the electrowetting equation and present a variety of recent extensions to the theory that account for distortions of the liquid surface due to local electric fields, for the finite penetration depth of electric fields into the liquid, as well as for finite conductivity effects in the presence of AC voltage. The most prominent failure of the electrowetting equation, namely the saturation of the contact angle at high voltage, is discussed in a separate section. Recent work in this direction indicates that a variety of distinct physical effects?rather than a unique one?are responsible for the saturation phenomenon, depending on experimental details. In the presence of suitable electrode patterns or topographic structures on the substrate surface, variations of the contact angle can give rise not only to continuous changes of the droplet shape, but also to discontinuous morphological transitions between distinct liquid morphologies. The dynamics of electrowetting are discussed briefly. Finally, we give an overview of recent work aimed at commercial applications, in particular in the fields of adjustable lenses, display technology, fibre optics, and biotechnology-related microfluidic devices.

/pdf/electrowetting-from-basics-to-applications-14e6zoxse5.pdf

Electrowetting: from basics to applications

Intermolecular And Surface Forces

Fundamental and applied research in chemistry and biology benefits from opportunities provided by droplet-based microfluidic systems. These systems enable the miniaturization of reactions by compartmentalizing reactions in droplets of femoliter to microliter volumes. Compartmentalization in droplets provides rapid mixing of reagents, control of the timing of reactions on timescales from milliseconds to months, control of interfacial properties, and the ability to synthesize and transport solid reagents and products. Droplet-based microfluidics can help to enhance and accelerate chemical and biochemical screening, protein crystallization, enzymatic kinetics, and assays. Moreover, the control provided by droplets in microfluidic devices can lead to new scientific methods and insights.

/pdf/reactions-in-droplets-in-microfluidic-channels-22iig0bcxm.pdf

Reactions in Droplets in Microfluidic Channels

We describe devices in which optics and fluidics are used synergistically to synthesize novel functionalities. Fluidic replacement or modification leads to reconfigurable optical systems, whereas the implementation of optics through the microfluidic toolkit gives highly compact and integrated devices. We categorize optofluidics according to three broad categories of interactions: fluid–solid interfaces, purely fluidic interfaces and colloidal suspensions. We describe examples of optofluidic devices in each category.

/pdf/developing-optofluidic-technology-through-the-fusion-of-txj6yfv9yu.pdf

Developing optofluidic technology through the fusion of microfluidics and optics

/pdf/erratum-nonlocal-dynamics-of-spontaneous-imbibition-fronts-2c8etsrtka.pdf

Erratum: Nonlocal Dynamics of Spontaneous Imbibition Fronts [Phys. Rev. Lett. 89, 104503 (2002)]

Drops on functional fibers: from barrels to clamshells and back

Drop manipulation in microchannels using electrodes

We study how solid layers are formed at the interface between aqueous salt solutions and decane with stearic acid, by monitoring the evolution of their mechanical, optical and chemical properties from the moment that the two liquids are exposed to each other. Using aqueous phases at various pH and containing different combinations of monoand/or divalent cations, the following general trends were found. For pH < pKa, stearic acid hardly displays any interfacial activity. At higher pH it deprotonates at the interface and forms metal stearate layers. This becomes evident via a remarkable signature of the time-dependent interfacial tension, which successively shows an instantaneous drop, a (lag time) plateau, a sharp decrease and finally an increase. The decrease in IFT after the lag time is accompanied by an increase in the dilatational storage modulus E’ and the formation of a visible layer.

Friedrich Gunther Mugele

Papers

Erratum: Nonlocal Dynamics of Spontaneous Imbibition Fronts [Phys. Rev. Lett. 89, 104503 (2002)]

Drops on functional fibers: from barrels to clamshells and back

Drop manipulation in microchannels using electrodes

Formation of solid metal stearate layers at the decane/water interface

Studying confined liquids by using the thermal fluctuations of cantilevers