Wireless Communications

Multiple antennas can be used for increasing the amount of diversity or the number of degrees of freedom in wireless communication systems. We propose the point of view that both types of gains can be simultaneously obtained for a given multiple-antenna channel, but there is a fundamental tradeoff between how much of each any coding scheme can get. For the richly scattered Rayleigh-fading channel, we give a simple characterization of the optimal tradeoff curve and use it to evaluate the performance of existing multiple antenna schemes.

/pdf/diversity-and-multiplexing-a-fundamental-tradeoff-in-4fmf0wuqet.pdf

Diversity and multiplexing: a fundamental tradeoff in multiple-antenna channels

The use of space-division multiple access (SDMA) in the downlink of a multiuser multiple-input, multiple-output (MIMO) wireless communications network can provide a substantial gain in system throughput. The challenge in such multiuser systems is designing transmit vectors while considering the co-channel interference of other users. Typical optimization problems of interest include the capacity problem - maximizing the sum information rate subject to a power constraint-or the power control problem-minimizing transmitted power such that a certain quality-of-service metric for each user is met. Neither of these problems possess closed-form solutions for the general multiuser MIMO channel, but the imposition of certain constraints can lead to closed-form solutions. This paper presents two such constrained solutions. The first, referred to as "block-diagonalization," is a generalization of channel inversion when there are multiple antennas at each receiver. It is easily adapted to optimize for either maximum transmission rate or minimum power and approaches the optimal solution at high SNR. The second, known as "successive optimization," is an alternative method for solving the power minimization problem one user at a time, and it yields superior results in some (e.g., low SNR) situations. Both of these algorithms are limited to cases where the transmitter has more antennas than all receive antennas combined. In order to accommodate more general scenarios, we also propose a framework for coordinated transmitter-receiver processing that generalizes the two algorithms to cases involving more receive than transmit antennas. While the proposed algorithms are suboptimal, they lead to simpler transmitter and receiver structures and allow for a reasonable tradeoff between performance and complexity.

/pdf/zero-forcing-methods-for-downlink-spatial-multiplexing-in-12aoeacvaq.pdf

Zero-forcing methods for downlink spatial multiplexing in multiuser MIMO channels

This paper presents an overview of progress in the area of multiple input multiple output (MIMO) space-time coded wireless systems. After some background on the research leading to the discovery of the enormous potential of MIMO wireless links, we highlight the different classes of techniques and algorithms proposed which attempt to realize the various benefits of MIMO including spatial multiplexing and space-time coding schemes. These algorithms are often derived and analyzed under ideal independent fading conditions. We present the state of the art in channel modeling and measurements, leading to a better understanding of actual MIMO gains. Finally, the paper addresses current questions regarding the integration of MIMO links in practical wireless systems and standards.

/pdf/from-theory-to-practice-an-overview-of-mimo-space-time-coded-431vesj02q.pdf

From theory to practice: an overview of MIMO space-time coded wireless systems

Broadband wireless access systems deployed in residential and business environments are likely to face hostile radio propagation environments, with multipath delay spread extending over tens or hundreds of bit intervals. Orthogonal frequency-division multiplex (OFDM) is a recognized multicarrier solution to combat the effects of such multipath conditions. This article surveys frequency domain equalization (FDE) applied to single-carrier (SC) modulation solutions. SC radio modems with frequency domain equalization have similar performance, efficiency, and low signal processing complexity advantages as OFDM, and in addition are less sensitive than OFDM to RF impairments such as power amplifier nonlinearities. We discuss similarities and differences of SC and OFDM systems and coexistence possibilities, and present examples of SC-FDE performance capabilities.

/pdf/frequency-domain-equalization-for-single-carrier-broadband-17aswqzbww.pdf

Frequency domain equalization for single-carrier broadband wireless systems

Information theory research has shown that the rich-scattering wireless channel is capable of enormous theoretical capacities if the multipath is properly exploited In this paper, we describe a wireless communication architecture known as vertical BLAST (Bell Laboratories Layered Space-Time) or V-BLAST, which has been implemented in real-time in the laboratory Using our laboratory prototype, we have demonstrated spectral efficiencies of 20-40 bps/Hz in an indoor propagation environment at realistic SNRs and error rates To the best of our knowledge, wireless spectral efficiencies of this magnitude are unprecedented and are furthermore unattainable using traditional techniques

V-BLAST: an architecture for realizing very high data rates over the rich-scattering wireless channel

We investigate robust wireless communication in high-scattering propagation environments using multi-element antenna arrays (MEAs) at both transmit and receive sites. A simplified, but highly spectrally efficient space-time communication processing method is presented. The user's bit stream is mapped to a vector of independently modulated equal bit-rate signal components that are simultaneously transmitted in the same band. A detection algorithm similar to multiuser detection is employed to detect the signal components in white Gaussian noise (WGN). For a large number of antennas, a more efficient architecture can offer no more than about 40% more capacity than the simple architecture presented. A testbed that is now being completed operates at 1.9 GHz with up to 16 quadrature amplitude modulation (QAM) transmitters and 16 receive antennas. Under ideal operation at 18 dB signal-to-noise ratio (SNR), using 12 transmit antennas and 16 receive antennas (even with uncoded communication), the theoretical spectral efficiency is 36 bit/s/Hz, whereas the Shannon capacity is 71.1 bit/s/Hz. The 36 bits per vector symbol, which corresponds to over 200 billion constellation points, assumes a 5% block error rate (BLER) for 100 vector symbol bursts.

/pdf/simplified-processing-for-high-spectral-efficiency-wireless-4sg0gxoviy.pdf

G.D. Golden

Papers

V-BLAST: an architecture for realizing very high data rates over the rich-scattering wireless channel

Simplified processing for high spectral efficiency wireless communication employing multi-element arrays