The radiation performance of a variety of complex oxides is predicted on the basis of a material's propensity to accommodate lattice point defects. The calculations indicate that a particular class of oxides possessing the fluorite crystal structure should accept radiation-induced defects into their lattices far more readily than a structurally similar class of oxides based on the pyrochlore crystal structure. Preliminary radiation damage experiments substantiate the prediction that fluorites are inherently more radiation resistant than pyrochlores. These results may permit the chemical durability and radiation tolerance of potential hosts for actinides and radioactive wastes to be tailored.

https://science.sciencemag.org/content/sci/289/5480/748.full.pdf

Radiation tolerance of complex oxides

This review provides a comprehensive evaluation of the state-of-knowledge of radiation effects in crystalline ceramics that may be used for the immobilization of high-level nuclear waste and plutonium. The current understanding of radiation damage processes, defect generation, microstructure development, theoretical methods, and experimental methods are reviewed. Fundamental scientific and technological issues that offer opportunities for research are identified. The most important issue is the need for an understanding of the radiation-induced structural changes at the atomic, microscopic, and macroscopic levels, and the effect of these changes on the release rates of radionuclides during corrosion.

https://www.cambridge.org/core/services/aop-cambridge-core/content/view/09D70E1FB1A625EC09BB98883C3A5ED3/S0884291400044411a.pdf/div-class-title-radiation-effects-in-crystalline-ceramics-for-the-immobilization-of-high-level-nuclear-waste-and-plutonium-div.pdf

Radiation effects in crystalline ceramics for the immobilization of high-level nuclear waste and plutonium

Defect-interface interactions

Radiation effects in ceramics

This review summarizes a variety of beam damage phenomena relating to oxides in (scanning) transmission electron microscopes, and underlines the shortcomings of currently popular mechanisms. These phenomena include mass loss, valence state reduction, phase decomposition, precipitation, gas bubble formation, phase transformation, amorphization and crystallization. Moreover, beam damage is also dependent on specimen thickness, specimen orientation, beam voltage, beam current density and beam size. This article incorporates all of these damage phenomena and experimental dependences into a general description, interpreted by a unified mechanism of damage by induced electric field. The induced electric field is produced by positive charges, which are generated from excitation and ionization. The distribution of the induced electric fields inside a specimen is beam-illumination- and specimen-shape- dependent, and associated with the experimental dependence of beam damage. Broadly speaking, the mechanism operates differently in two types of material. In type I, damage increases the resistivity of the irradiated materials, and is thus divergent, resulting in phase separation. In type II, damage reduces the resistivity of the irradiated materials, and is thus convergent, resulting in phase transformation. Damage by this mechanism is dependent on electron-beam current density. The two experimental thresholds are current density and irradiation time. The mechanism comes into effect when these thresholds are exceeded, below which the conventional mechanisms of knock-on and radiolysis still dominate.

https://iopscience.iop.org/article/10.1088/0034-4885/79/1/016501/pdf

Electron beam damage in oxides: a review

Neutron irradiation damage in MgO, Al2O3 and MgAl2O4 ceramics☆

https://digital.library.unt.edu/ark:/67531/metadc1096147/m2/1/high_res_d/5783890.pdf

G.F. Hurley

Papers

Neutron irradiation damage in MgO, Al2O3 and MgAl2O4 ceramics☆

Structural performance of ceramics in a high-fluence fusion environment

Structural properties of MgO AND MgAl2O4, after fission neutron irradiation near room temperature

Ceramic and organic insulators for fusion applications

The effect of elevated-temperature neutron irradiation on fracture toughness of ceramics