Unlike conventional materials removal methods, additive manufacturing (AM) is based on a novel materials incremental manufacturing philosophy. Additive manufacturing implies layer by layer shaping and consolidation of powder feedstock to arbitrary configurations, normally using a computer controlled laser. The current development focus of AM is to produce complex shaped functional metallic components, including metals, alloys and metal matrix composites (MMCs), to meet demanding requirements from aerospace, defence, automotive and biomedical industries. Laser sintering (LS), laser melting (LM) and laser metal deposition (LMD) are presently regarded as the three most versatile AM processes. Laser based AM processes generally have a complex non-equilibrium physical and chemical metallurgical nature, which is material and process dependent. The influence of material characteristics and processing conditions on metallurgical mechanisms and resultant microstructural and mechanical properties of AM proc...

Laser additive manufacturing of metallic components: materials, processes and mechanisms

Wire-feed additive manufacturing (AM) is a promising alternative to traditional subtractive manufacturing for fabricating large expensive metal components with complex geometry. The current research focus on wire-feed AM is trying to produce complex-shaped functional metal components with good geometry accuracy, surface finish and material property to meet the demanding requirements from aerospace, automotive and rapid tooling industry. Wire-feed AM processes generally involve high residual stresses and distortions due to the excessive heat input and high deposition rate. The influences of process conditions, such as energy input, wire-feed rate, welding speed, deposition pattern and deposition sequences, etc., on thermal history and resultant residual stresses of AM-processed components needs to be further understood. In addition, poor accuracy and surface finish of the process limit the applications of wire-feed AM technology. In this paper, after an introduction of various wire-feed AM technologies and its characteristics, an in depth review of various process aspects of wire-feed AM, including quality and accuracy of wire-feed AM processed components, will be presented. The overall objective is to identify the current challenges for wire-feed AM as well as point out the future research direction.

Wire-feed additive manufacturing of metal components: technologies, developments and future interests

Laser-based additive manufacturing (LBAM) processes can be utilized to generate functional parts (or prototypes) from the ground-up via layer-wise cladding – providing an opportunity to generate complex-shaped, functionally graded or custom-tailored parts that can be utilized for a variety of engineering applications. Directed Energy Deposition (DED), utilizes a concentrated heat source, which may be a laser or electron beam, with in situ delivery of powder- or wire-shaped material for subsequent melting to accomplish layer-by-layer part fabrication or single-to-multi layer cladding/repair. Direct Laser Deposition (DLD), a form of DED, has been investigated heavily in the last several years as it provides the potential to (i) rapidly prototype metallic parts, (ii) produce complex and customized parts, (iii) clad/repair precious metallic components and (iv) manufacture/repair in remote or logistically weak locations. DLD and Powder Bed Fusion-Laser (PBF-L) are two common LBAM processes for additive metal part fabrication and are currently demonstrating their ability to revolutionize the manufacturing industry; breaking barriers imposed via traditional, ‘subtractive’ metalworking processes. This article provides an overview of the major advancements, challenges and physical attributes related to DLD, and is one of two Parts focused specifically on DLD. Part I (this article) focuses on describing the thermal/fluidic phenomena during the powder-fed DLD process, while Part II focuses on the mechanical properties and microstructure of parts manufactured via DLD. In this current article, a selection of recent research efforts – including methodology, models and experimental results – will be provided in order to educate the reader of the thermal/fluidic processes that occur during DLD, as well as providing important background information relevant to DLD as a whole. The thermal/fluid phenomena inherent to DLD directly influence the solidification heat transfer which thus impacts the part's microstructure and associated thermo-mechanical properties. A thorough understanding of the thermal/fluid aspects inherent to DLD is vital for optimizing the DLD process and ensuring consistent, high-quality parts.

An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics

The mechanical behavior, and thus ‘trustworthiness’/durability, of engineering components fabricated via laser-based additive manufacturing (LBAM) is still not well understood. This is adversely affecting the continual adoption of LBAM for part fabrication/repair within the global industry at large. Hence, it is important to determine the mechanical properties of parts fabricated via LBAM as to predict their performance while in service. This article is part of two-part series that provides an overview of Direct Laser Deposition (DLD) for additive manufacturing (AM) of functional parts. The first part (Part I) provides a general overview of the thermo-fluid physics inherent to the DLD process. The objective of this current article (Part II) is to provide an overview of the mechanical characteristics and behavior of metallic parts fabricated via DLD, while also discussing methods to optimize and control the DLD process. Topics to be discussed include part microstructure, tensile properties, fatigue behavior and residual stress – specifically with their relation to DLD and post-DLD process parameters (e.g. heat treatment, machining). Methods for controlling/optimizing the DLD process for targeted part design will be discussed – with an emphasis on monitored part temperature and/or melt pool morphology. Some future challenges for advancing the knowledge in AM-part adoption are discussed. Despite various research efforts into DLD characteristics and process optimization, it is clear that there are still many areas that require further investigation.

G.I Keel

Papers

Directed light fabrication of a solid metal hemisphere using 5-axis powder deposition