SUMMARY

Results are reported concerning the use of an energy dispersive X-ray detector to carry out the analysis of thin foils in the electron microscope. The combination of a thin specimen and the extreme stability of the energy dispersive X-ray detector enables the experimental determination of a calibration curve of X-ray production—detection efficiency vs characteristic X-ray energy. Quantitative analysis can be carried out using the calibration curve without reference to standards at the time of analysis.

The quantitative analysis of thin specimens

We investigated the capacity of a clonal osteogenic cell line MC3T3-E1, established from newborn mouse calvaria and selected on the basis of high alkaline phosphatase (ALP) activity in the confluent state, to differentiate into osteoblasts and mineralize in vitro. The cells in the growing state showed a fibroblastic morphology and grew to form multiple layers. On day 21, clusters of cells exhibiting typical osteoblastic morphology were found in osmiophilic nodular regions. Such nodules increased in number and size with incubation time and became easily identifiable with the naked eye by day 40-50. In the central part of well-developed nodules, osteocytes were embedded in heavily mineralized bone matrix. Osteoblasts were arranged at the periphery of the bone spicules and were surrounded by lysosome-rich cells and a fibroblastic cell layer. Numerous matrix vesicles were scattered around the osteoblasts and young osteocytes. Matrix vesicles and plasma membranes of osteoblasts, young osteocytes, and lysosome-rich cells showed strong reaction to cytochemical stainings for ALP activity and calcium ions. Minerals were initially localized in the matrix vesicles and then deposited on well-banded collagen fibrils. Deposited minerals consisted exclusively of calcium and phosphorus, and some of the crystals had matured into hydroxyapatite crystals. These results indicate that MC3T3-E1 cells have the capacity to differentiate into osteoblasts and osteocytes and to form calcified bone tissue in vitro.

/pdf/in-vitro-differentiation-and-calcification-in-a-new-clonal-28xhnmljt6.pdf

In vitro differentiation and calcification in a new clonal osteogenic cell line derived from newborn mouse calvaria

Nanostructured metals are generally unstable; their grains grow rapidly even at low temperatures, rendering them difficult to process and often unsuitable for usage. Alloying has been found to improve stability, but only in a few empirically discovered systems. We have developed a theoretical framework with which stable nanostructured alloys can be designed. A nanostructure stability map based on a thermodynamic model is applied to design stable nanostructured tungsten alloys. We identify a candidate alloy, W-Ti, and demonstrate substantially enhanced stability for the high-temperature, long-duration conditions amenable to powder-route production of bulk nanostructured tungsten. This nanostructured alloy adopts a heterogeneous chemical distribution that is anticipated by the present theoretical framework but unexpected on the basis of conventional bulk thermodynamics.

/pdf/design-of-stable-nanocrystalline-alloys-p52isaf08q.pdf

Design of stable nanocrystalline alloys.

Design of Stable Nanocrystalline Alloys

Focused Ion Beam (FIB) combined with SEM and TEM: Advanced analytical tools for studies of chemical composition, microstructure and crystal structure in geomaterials on a nanometre scale

SUMMARY
Results are reported concerning the application of the analytical electron microscope EMMA-4 to the quantitative analysis of thin foils. A simple procedure by which the observed characteristic X-ray intensities from a thin foil sample can be converted into chemical weight fractions is described. This technique has been applied to study the partitioning of manganese between the carbide and ferrite phases during the isothermal decomposition of a eutectoid steel. The results show that it is possible to analyse the manganese content of the ferrite and carbide phases independently and the partitioning of manganese to the carbide phase has been followed as a function of time at the isothermal transformation temperature.

The analysis of a calcium-rich pyroxene which contains calcium-poor precipitate lamellae is described. The results are consistent with the precipitation of a pigeonite, poor in calcium and rich in iron, from an augite host.

The third example is the ‘in situ’ analysis of nitride precipitates in a stainless steel. The precipitates are known to contain either titanium or chromium, but it is impossible from morphological or diffraction evidence to differentiate between the two types of nitride. Combined electron microscopy and microprobe analysis is shown to be a rapid and positive means of identifying the precipitates.

G. W. Lorimer

Papers

The quantitative analysis of thin specimens

The use of the analytical electron microscope EMMA-4 to study the solute distribution in thin foils: some applications to metals and minerals

Microscopy of Oxidation