Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with radio frequency and mixed signal power constraints, new multiple-input multiple-output (MIMO) communication signal processing techniques are needed. Because of the wide bandwidths, low complexity transceiver algorithms become important. There are opportunities to exploit techniques like compressed sensing for channel estimation and beamforming. This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies.

An Overview of Signal Processing Techniques for Millimeter Wave MIMO Systems

Millimeter wave (mmWave) communications have recently attracted large research interest, since the huge available bandwidth can potentially lead to the rates of multiple gigabit per second per user Though mmWave can be readily used in stationary scenarios, such as indoor hotspots or backhaul, it is challenging to use mmWave in mobile networks, where the transmitting/receiving nodes may be moving, channels may have a complicated structure, and the coordination among multiple nodes is difficult To fully exploit the high potential rates of mmWave in mobile networks, lots of technical problems must be addressed This paper presents a comprehensive survey of mmWave communications for future mobile networks (5G and beyond) We first summarize the recent channel measurement campaigns and modeling results Then, we discuss in detail recent progresses in multiple input multiple output transceiver design for mmWave communications After that, we provide an overview of the solution for multiple access and backhauling, followed by the analysis of coverage and connectivity Finally, the progresses in the standardization and deployment of mmWave for mobile networks are discussed

Millimeter Wave Communications for Future Mobile Networks

The use of mmWave frequencies for wireless communications offers channel bandwidths far greater than previously available, while enabling dozens or even hundreds of antenna elements to be used at the user equipment, base stations, and access points. To date, MIMO techniques, such as spatial multiplexing, beamforming, and diversity, have been widely deployed in lower-frequency systems such as IEEE 802.11n/ac (wireless local area networks) and 3GPP LTE 4G cellphone standards. Given the tiny wavelengths associated with mmWave, coupled with differences in the propagation and antennas used, it is unclear how well spatial multiplexing with multiple streams will be suited to future mmWave mobile communications. This tutorial explores the fundamental issues involved in selecting the best communications approaches for mmWave frequencies, and provides insights, challenges, and appropriate uses of each MIMO technique based on early knowledge of the mmWave propagation environment.

Mimo for millimeter-wave wireless communications: beamforming, spatial multiplexing, or both?

A new class of low-complexity, yet energy-efficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely, the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO), has emerged. These systems are capable of exploiting the spatial dimensions (i.e., the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication while relying on a single-Radio Frequency (RF) chain. Moreover, SM may be also viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/cooperative protocol design issues, and on their meritorious variants.

/pdf/design-guidelines-for-spatial-modulation-4di7fcwiu9.pdf

Design Guidelines for Spatial Modulation

Several enabling technologies are being explored for the fifth-generation (5G) mobile system era. The aim is to evolve a cellular network that remarkably pushes forward the limits of legacy mobile systems across all dimensions of performance metrics. One dominant technology that consistently features in the list of the 5G enablers is the millimeter-wave (mmWave) massive multiple-input-multiple-output (massive MIMO) system. It shows potentials to significantly raise user throughput, enhance spectral and energy efficiencies and increase the capacity of mobile networks using the joint capabilities of the huge available bandwidth in the mmWave frequency bands and high multiplexing gains achievable with massive antenna arrays. In this survey, we present the preliminary outcomes of extensive research on mmWave massive MIMO (as research on this subject is still in the exploratory phase) and highlight emerging trends together with their respective benefits, challenges, and proposed solutions. The survey spans broad areas in the field of wireless communications, and the objective is to point out current trends, evolving research issues and future directions on mmWave massive MIMO as a technology that will open up new frontiers of services and applications for next-generation cellular networks.

Millimeter-Wave Massive MIMO Communication for Future Wireless Systems: A Survey

IEEE 802.16m and 3GPP LTE-Advanced are the two evolving standards targeting 4G wireless systems. In both standards, multiple-input multiple-output antenna technologies play an essential role in meeting the 4G requirements. The application of MIMO technologies is one of the most crucial distinctions between 3G and 4G. It not only enhances the conventional point-to-point link, but also enables new types of links such as downlink multiuser MIMO. A large family of MIMO techniques has been developed for various links and with various amounts of available channel state information in both IEEE 802.16e/m and 3GPP LTE/LTE-Advanced. In this article we provide a survey of the MIMO techniques in the two standards. The MIMO features of the two are compared, and the engineering considerations are depicted.

/pdf/mimo-techniques-in-wimax-and-lte-a-feature-overview-cak3ssygj2.pdf

Guangjie Li

Papers

MIMO techniques in WiMAX and LTE: a feature overview