Wireless power transfer (WPT) using magnetic resonance is the technology which could set human free from the annoying wires. In fact, the WPT adopts the same basic theory which has already been developed for at least 30 years with the term inductive power transfer. WPT technology is developing rapidly in recent years. At kilowatts power level, the transfer distance increases from several millimeters to several hundred millimeters with a grid to load efficiency above 90%. The advances make the WPT very attractive to the electric vehicle (EV) charging applications in both stationary and dynamic charging scenarios. This paper reviewed the technologies in the WPT area applicable to EV wireless charging. By introducing WPT in EVs, the obstacles of charging time, range, and cost can be easily mitigated. Battery technology is no longer relevant in the mass market penetration of EVs. It is hoped that researchers could be encouraged by the state-of-the-art achievements, and push forward the further development of WPT as well as the expansion of EV.

Wireless Power Transfer for Electric Vehicle Applications

This paper overviews theoretical and practical design issues related to inductive power transfer systems and verifies the developed theory using a practical electric vehicle battery charger. The design focuses on the necessary approaches to ensure power transfer over the complete operating range of the system. As such, a new approach to the design of the primary resonant circuit is proposed, whereby deviations from design expectations due to phase or frequency shift are minimized. Of particular interest are systems that are neither loosely nor tightly coupled. The developed solution depends on the selected primary and secondary resonant topologies, the magnetic coupling coefficient, and the secondary quality factor.

Design considerations for a contactless electric vehicle battery charger

A system and method for variable power transfer in an inductive charging or power system. In accordance with an embodiment the system comprises a pad or similar base unit that contains a primary, which creates an alternating magnetic field. A receiver comprises a means for receiving the energy from the alternating magnetic field from the pad and transferring it to a mobile device, battery, or other device. In accordance with various embodiments, additional features can be incorporated into the system to provide greater power transfer efficiency, and to allow the system to be easily modified for applications that have different power requirements. These include variations in the material used to manufacture the primary and/or the receiver coils; modified circuit designs to be used on the primary and/or receiver side; and additional circuits and components that perform specialized tasks, such as mobile device or battery identification, and automatic voltage or power-setting for different devices or batteries.

System and method for inductive charging of portable devices

Loosely coupled inductive power transfer (LCIPT) systems are designed to deliver power efficiently from a stationary primary source to one or more movable secondary loads over relatively large air gaps via magnetic coupling. In this paper, a general approach is presented to identify the power transfer capability and bifurcation phenomena (multiple operating modes) for such systems. This is achieved using a high order mathematical model consisting of both primary and secondary resonant circuits. The primary compensation is deliberately designed to make the primary zero phase angle frequency equal the secondary resonant frequency to achieve maximum power with minimum VA rating of the supply. A contactless electric vehicle battery charger was used to validate the theory by comparing the measured and calculated operational frequency and power transfer. For bifurcation-free operation, the power transfer capability and controllability are assured by following the proposed bifurcation criteria. Where controllable operation within the bifurcation region is achievable, a significant increase in power is possible.

Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems

A detection method for use in a primary unit of an inductive power transfer system, the primary unit being operable to transmit power wirelessly by electromagnetic induction to at least one secondary unit of the system located in proximity to the primary unit and/or to a foreign object located in said proximity, the method comprising: driving the primary unit so that in a driven state the magnitude of an electrical drive signal supplied to one or more primary coils of the primary unit changes from a first value to a second value; assessing the effect of such driving on an electrical characteristic of the primary unit; and detecting in dependence upon the assessed effect the presence of a said secondary unit and/or a foreign object located in proximity to said primary unit.

Inductive power transfer

A noncontact charging system using a resonant converter is presented in this paper, where the power transfer ability of a detachable transformer is improved by using a parallel capacitor connected to the secondary coil. A method to get the optimum value of the capacitance which would maximize the charging current is described. A method of application to the practical circuit such as a voltage resonant converter is also described.

A noncontact charger using a resonant converter with parallel capacitor of the secondary coil

A noncontact charging system using a resonant converter is presented in this paper, where the efficiency is improved by connecting a parallel capacitor in the secondary side of the transformer. A method of getting an optimum value of the capacity is also described.

H. Abe

Papers

A noncontact charger using a resonant converter with parallel capacitor of the secondary coil

A noncontact charger using a resonant converter with parallel capacitor of the secondary coil