We consider radio applications in sensor networks, where the nodes operate on batteries so that energy consumption must be minimized, while satisfying given throughput and delay requirements. In this context, we analyze the best modulation and transmission strategy to minimize the total energy consumption required to send a given number of bits. The total energy consumption includes both the transmission energy and the circuit energy consumption. We first consider multi-input-multi-output (MIMO) systems based on Alamouti diversity schemes, which have good spectral efficiency but also more circuitry that consumes energy. We then extend our energy-efficiency analysis of MIMO systems to individual single-antenna nodes that cooperate to form multiple-antenna transmitters or receivers. By transmitting and/or receiving information jointly, we show that tremendous energy saving is possible for transmission distances larger than a given threshold, even when we take into account the local energy cost necessary for joint information transmission and reception. We also show that over some distance ranges, cooperative MIMO transmission and reception can simultaneously achieve both energy savings and delay reduction.

Energy-efficiency of MIMO and cooperative MIMO techniques in sensor networks

Wireless systems where the nodes operate on batteries so that energy consumption must be minimized while satisfying given throughput and delay requirements are considered. In this context, the best modulation strategy to minimize the total energy consumption required to send a given number of bits is analyzed. The total energy consumption includes both the transmission energy and the circuit energy consumption. For uncoded systems, by optimizing the transmission time and the modulation parameters, it is shown that up to 80% energy savings is achievable over nonoptimized systems. For coded systems, it is shown that the benefit of coding varies with the transmission distance and the underlying modulation schemes.

Energy-constrained modulation optimization

Millimeter-wave wireless systems are emerging as a promising technology for meeting the exploding capacity requirements of wireless communication networks. Besides large bandwidths, small wavelengths at mm-wave lead to a high-dimensional spatial signal space, that can be exploited for significant capacity gains through high-dimensional multiple-input multiple-output (MIMO) techniques. In conventional MIMO approaches, optimal performance requires prohibitively high transceiver complexity. By combining the concept of beamspace MIMO communication with a hybrid analog-digital transceiver, continuous aperture phased (CAP) MIMO achieves near-optimal performance with dramatically lower complexity. This paper presents a framework for physically-accurate computational modeling and analysis of CAP-MIMO, and reports measurement results on a DLA-based prototype for multimode line-of-sight communication. The model, based on a critically sampled system representation, is used to demonstrate the performance gains of CAP-MIMO over state-of-the-art designs at mm-wave. For example, a CAP-MIMO system can achieve a spectral efficiency of 10-20 bits/s/Hz with a 17-31 dB power advantage over state-of-the-art, corresponding to a data rate of 10-200 Gbps with 1-10 GHz system bandwidth. The model is refined to analyze critical sources of power loss in an actual multimode system. The prototype-based measurement results closely follow the theoretical predictions, validating CAP-MIMO theory, and illustrating the utility of the model.

Beamspace MIMO for Millimeter-Wave Communications: System Architecture, Modeling, Analysis, and Measurements

The physics and applications of a broad class of artificial electromagnetic materials composed of lattices of aligned metal rods embedded in a dielectric matrix are reviewed. Such structures are here termed wire metamaterials. They appear in various settings and can operate from microwaves to THz and optical frequencies. An important group of these metamaterials is a wire medium possessing extreme optical anisotropy. The study of wire metamaterials has a long history, however, most of their important and useful properties have been revealed and understood only recently, especially in the THz and optical frequency ranges where the wire media correspond to the lattices of microwires and nanowires, respectively. Another group of wire metamaterials are arrays and lattices of nanorods of noble metals whose unusual properties are driven by plasmonic resonances.

Wire metamaterials: physics and applications.

Nanonetworks consist of nano-sized communicating devices which are able to perform simple tasks at the nanoscale. Nanonetworks are the enabling technology of long-awaited applications such as advanced health monitoring systems or high-performance distributed nano-computing architectures. The peculiarities of novel plasmonic nano-transceivers and nano-antennas, which operate in the Terahertz Band (0.1-10 THz), require the development of tailored communication schemes for nanonetworks. In this paper, a modulation and channel access scheme for nanonetworks in the Terahertz Band is developed. The proposed technique is based on the transmission of one-hundred-femtosecond-long pulses by following an asymmetric On-Off Keying modulation Spread in Time (TS-OOK). The performance of TS-OOK is evaluated in terms of the achievable information rate in the single-user and the multi-user cases. An accurate Terahertz Band channel model, validated by COMSOL simulation, is used, and novel stochastic models for the molecular absorption noise in the Terahertz Band and for the multi-user interference in TS-OOK are developed. The results show that the proposed modulation can support a very large number of nano-devices simultaneously transmitting at multiple Gigabits-per-second and up to Terabits-per-second, depending on the modulation parameters and the network conditions.

H. Heffner

Papers

on Microwave Theory and Techniques