Mass design method considering force control errors for two-redundant cable-suspended parallel robots

An adaptive multi-objective motion distribution framework for wheeled mobile manipulators via null-space exploration

Robotic systems are essential to technological development in the industrial, medical, and aerospace sectors. Nevertheless, their use in different applications requires that the robot have the best possible execution efficiency. For this, a robot with specific optimized characteristics is necessary to impact the performance of the specific task. Different techniques have been used in robot optimization, the most widely used being genetic algorithms (GA) and particle swarm optimization (PSO). However, there are optimization algorithms with high convergence speeds inspired by animal behavior whose application in robot optimization has not been reported. In this work, bio-inspired algorithms Harris hawks optimization (HHO) and Grey wolf optimizer (GWO) are applied to a six-degree-of-freedom (6DOF) robot arm design through kinematic optimization. The lengths of the main robot links are optimized to improve the workspace volume and obtain a better-conditioned robot using the structural length index (SLI) and global condition index (GCI) as objective functions. A comparison is made between the proposed algorithms and GA and PSO regarding convergence speed, computational load, and optimality. Similar behavior has been found for HHO, GWO, and PSO compared to GA for both indexes. For the GCI problem, an average improvement of 14% was found when optimizing an industrial robot arm. Furthermore, multiple runs experiment is performed to test the robustness of the algorithms. The results show that HHO is the best technique to obtain an optimal robot design because it needs less than ten iterations to provide a better result despite its computational load.

https://ieeexplore.ieee.org/ielx7/6287639/6514899/09919847.pdf

Kinematic Optimization of 6DOF Serial Robot Arms by Bio-Inspired Algorithms

The separation of gangues from coals with robots is an effective and practicable means. Therefore, a cable-suspended gangue-sorting robot (CSGSR) with an end-grab was developed in our early work. Due to the unidirectional characteristic, the flexibility of cables, and the dynamic impact of pick-and-place gangues, one of the significant issues with the robots is robustness under internal and external disturbances. Cable tensions, being the end-grab’s constraints, have a crucial effect on the robustness of the CSGSR while disturbances are on. Two main issues related to the CSGSR, as a result, are addressed in the present paper: minimum dynamic cable tension workspace generation and a sensitivity analysis method for the dynamic cable tensions. Firstly, the four cable tensions and minimum dynamic cable tension while the end-grab was located at an arbitrary position of the task space were obtained with the dynamics of the CSGSR. In addition, with the dynamics of the CSGSR, a minimum dynamic cable tension workspace (MDCTW) generating approach is presented, where the minimum dynamic cable tensions are greater than a preset value, therefore ensuring the robustness of the end-grab under the disturbances. Secondly, a method for dynamic cable tension sensitivity (DCTS) of the robots is proposed with grey relational analysis, by which the influence degree of the end-grab’s positions on the four dynamic cable tensions and the minimum dynamic cable tensions was considered. Finally, the effectiveness of the proposed MDCTW generation algorithm and the DCTS analysis method were examined through simulation on the CSGSR, and it was indicated that the proposed MDCTW generation algorithm and the DCTS analysis method were able to provide theoretical guidance for pick-and-place trajectory planning and generation of the end-grab in practice.

/pdf/minimum-dynamic-cable-tension-workspace-generation-2bdyqzv7.pdf

Minimum Dynamic Cable Tension Workspace Generation Techniques and Cable Tension Sensitivity Analysis Methods for Cable-Suspended Gangue-Sorting Robots

https://link.springer.com/content/pdf/10.1007/s42235-023-00347-9.pdf

A Real-Time Planning and Control Framework for Robust and Dynamic Quadrupedal Locomotion

Workspace analysis and optimal design of dual cable-suspended robots for construction

Tension distribution algorithm based on graphics with high computational efficiency and robust optimization for two-redundant cable-driven parallel robots

The task of performing locomotion and manipulation simultaneously poses several scientific challenges, such as how to deal with the coupling effects between them and how to cope with unknown disturbances introduced by manipulation. This paper presents an inverse dynamics-based whole-body controller for a torque-controlled quadrupedal manipulator capable of performing locomotion while executing manipulation tasks. Unlike existing methods that deal with locomotion and manipulation separately, the proposed controller can handle them uniformly, which can take into account the coupling effects between the base, limbs and manipulated object. The controller tracks the desired task–space motion references based on a hierarchical optimization algorithm, given a set of hierarchies that define strict priorities and the importance of weighting each task within a hierarchy. The simulation results show the robot is able to follow multiple task–space motion reference trajectories with reasonable deviation, which proved the effectiveness of the proposed controller.

/pdf/whole-body-control-for-a-torque-controlled-legged-mobile-1317hfjn.pdf

Haibo Gao

Papers

Workspace analysis and optimal design of dual cable-suspended robots for construction

Tension distribution algorithm based on graphics with high computational efficiency and robust optimization for two-redundant cable-driven parallel robots

Whole-Body Control for a Torque-Controlled Legged Mobile Manipulator

Design of spatial adaptive cable-driven parallel robots with an unlimited rotation axis using the cable wrapping phenomenon

Integrated attitude and landing control for quadruped robots in asteroid landing mission scenarios using reinforcement learning