Oil spills and industrial organic pollutants have induced severe water pollution and threatened every species in the ecological system. To deal with oily water, special wettability stimulated materials have been developed over the past decade to separate oil-and-water mixtures. Basically, synergy between the surface chemical composition and surface topography are commonly known as the key factors to realize the opposite wettability to oils and water and dominate the selective wetting or absorption of oils/water. In this review, we mainly focus on the development of materials with either super-lyophobicity or super-lyophilicity properties in oil/water separation applications where they can be classified into four kinds as follows (in terms of the surface wettability of water and oils): (i) superhydrophobic and superoleophilic materials, (ii) superhydrophilic and under water superoleophobic materials, (iii) superhydrophilic and superoleophobic materials, and (iv) smart oil/water separation materials with switchable wettability. These materials have already been applied to the separation of oil-and-water mixtures: from simple oil/water layered mixtures to oil/water emulsions (including oil-in-water emulsions and water-in-oil emulsions), and from non-intelligent materials to intelligent materials. Moreover, they also exhibit high absorption capacity or separation efficiency and selectivity, simple and fast separation/absorption ability, excellent recyclability, economical efficiency and outstanding durability under harsh conditions. Then, related theories are proposed to understand the physical mechanisms that occur during the oil/water separation process. Finally, some challenges and promising breakthroughs in this field are also discussed. It is expected that special wettability stimulated oil/water separation materials can achieve industrial scale production and be put into use for oil spills and industrial oily wastewater treatment in the near future.

Biomimetic super-lyophobic and super-lyophilic materials applied for oil/water separation: a new strategy beyond nature

Advanced Mathematical Methods for Scientists and Engineers

Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves

The long-standing popularity of thermoelectric materials has contributed to the creation of various thermoelectric devices and stimulated the development of strategies to improve their thermoelectric performance. In this review, we aim to comprehensively summarize the state-of-the-art strategies for the realization of high-performance thermoelectric materials and devices by establishing the links between synthesis, structural characteristics, properties, underlying chemistry and physics, including structural design (point defects, dislocations, interfaces, inclusions, and pores), multidimensional design (quantum dots/wires, nanoparticles, nanowires, nano- or microbelts, few-layered nanosheets, nano- or microplates, thin films, single crystals, and polycrystalline bulks), and advanced device design (thermoelectric modules, miniature generators and coolers, and flexible thermoelectric generators). The outline of each strategy starts with a concise presentation of their fundamentals and carefully selected examples. In the end, we point out the controversies, challenges, and outlooks toward the future development of thermoelectric materials and devices. Overall, this review will serve to help materials scientists, chemists, and physicists, particularly students and young researchers, in selecting suitable strategies for the improvement of thermoelectrics and potentially other relevant energy conversion technologies.

Advanced Thermoelectric Design: From Materials and Structures to Devices

Three-dimensional nanofibrous aerogels (NFAs) that are both highly compressible and resilient would have broad technological implications for areas ranging from electrical devices and bioengineering to damping materials; however, creating such NFAs has proven extremely challenging. Here we report a novel strategy to create fibrous, isotropically bonded elastic reconstructed (FIBER) NFAs with a hierarchical cellular structure and superelasticity by combining electrospun nanofibres and the fibrous freeze-shaping technique. Our approach causes the intrinsically lamellar deposited electrospun nanofibres to assemble into elastic bulk aerogels with tunable densities and desirable shapes on a large scale. The resulting FIBER NFAs exhibit densities of >0.12 mg cm(-3), rapid recovery from deformation, efficient energy absorption and multifunctionality in terms of the combination of thermal insulation, sound absorption, emulsion separation and elasticity-responsive electric conduction. The successful synthesis of such fascinating materials may provide new insights into the design and development of multifunctional NFAs for various applications.

/pdf/ultralight-nanofibre-assembled-cellular-aerogels-with-feyg0cwpzn.pdf

Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality

Diffuse interface model for incompressible two-phase flows with large density ratios

Local radial basis function-based differential quadrature method and its application to solve two-dimensional incompressible Navier–Stokes equations

Recently, porous hydrophobic/oleophilic materials (PHOMs) have been shown to be the most promising candidates for cleaning up oil spills; however, due to their limited absorption capacity, a large quantity of PHOMs would be consumed in oil spill remediation, causing serious economic problems. In addition, the complicated and time-consuming process of oil recovery from these sorbents is also an obstacle to their practical application. To solve the above problems, we apply external pumping on PHOMs to realize the continuous collection of oil spills in situ from the water surface with high speed and efficiency. Based on this novel design, oil/water separation and oil collection can be simultaneously achieved in the remediation of oil spills, and the oil sorption capacity is no longer limited to the volume and weight of the sorption material. This novel external pumping technique may bring PHOMs a step closer to practical application in oil spill remediation.

Pumping through Porous Hydrophobic/Oleophilic Materials: An Alternative Technology for Oil Spill Remediation

We investigate the wetting condition for diffuse-interface methods in the simulation of two-fluid flows with moving contact lines. A current method, which uses a surface-energy approach, is shown not to result in a slope of the interface that is consistent with the prescribed value of the contact angle. A geometric formulation is proposed that does result in the prescribed contact angle. Test results are presented for the axisymmetric droplet spreading due to the capillary force and the motion of a droplet on a solid substrate in a shear flow.

Wetting condition in diffuse interface simulations of contact line motion.

Computational methods have been extended recently to allow for the presence of moving contact lines in simulated two-phase flows. The predictive capability offered by these methods is potentially large, joining theoretical and experimental methods. Several challenges rather unique to this area need to be overcome, however, notably regarding the conditions near a moving contact line and the very large separation of length scales in these flows. We first summarize the main models for moving contact lines and follow with an overview of computational methods that includes direct continuum approaches and macroscale models that resolve only the large-scale flow by modeling the effects of the conditions near the contact line using theory. Results are presented for contact-line motion on ideal as well as patterned and grooved surfaces and for extensions to account for complexities such as thermocapillarity and phase change.

Hang Ding

Papers

Diffuse interface model for incompressible two-phase flows with large density ratios

Local radial basis function-based differential quadrature method and its application to solve two-dimensional incompressible Navier–Stokes equations

Pumping through Porous Hydrophobic/Oleophilic Materials: An Alternative Technology for Oil Spill Remediation

Wetting condition in diffuse interface simulations of contact line motion.

Numerical Simulations of Flows with Moving Contact Lines