Showing papers by "Hao Su published in 2011"

Real-time MRI-guided needle placement robot with integrated fiber optic force sensing

Abstract: This paper presents the first prototype of a magnetic resonance imaging (MRI) compatible piezoelectric actuated robot integrated with a high-resolution fiber optic sensor for prostate brachytherapy with real-time in situ needle steering capability in 3T MRI. The 6-degrees-of-freedom (DOF) robot consists of a modular 3-DOF needle driver with fiducial tracking frame and a 3-DOF actuated Cartesian stage. The needle driver provides needle cannula rotation and translation (2-DOF) and stylet translation (1-DOF). The driver mimics the manual physician gesture by two point grasping. To render proprioception associated with prostate interventions, a Fabry-Perot interferometer based fiber optic strain sensor is designed to provide high-resolution axial needle insertion force measurement and is robust to large range of temperature variation. The paper explains the robot mechanism, controller design, optical modeling and opto-mechanical design of the force sensor. MRI compatibility of the robot is evaluated under 3T MRI using standard prostate imaging sequences and average signal noise ratio (SNR) loss is limited to 2% during actuator motion. A dynamic needle insertion is performed and bevel tip needle steering capability is demonstrated under continuous real-time MRI guidance, both with no visually identifiable interference during robot motion. Fiber optic sensor calibration validates the theoretical modeling with satisfactory sensing range and resolution for prostate intervention.

An affordable compact humanoid robot for autism spectrum disorder interventions in children

Abstract: Autism Spectrum Disorder impacts an ever-increasing number of children. The disorder is marked by social functioning that is characterized by impairment in the use of nonverbal behaviors, failure to develop appropriate peer relationships and lack of social and emotional exchanges. Providing early intervention through the modality of play therapy has been effective in improving behavioral and social outcomes for children with autism. Interacting with humanoid robots that provide simple emotional response and interaction has been shown to improve the communication skills of autistic children. In particular, early intervention and continuous care provide significantly better outcomes. Currently, there are no robots capable of meeting these requirements that are both low-cost and available to families of autistic children for in-home use. This paper proposes the piloting the use of robotics as an improved diagnostic and early intervention tool for autistic children that is affordable, non-threatening, durable, and capable of interacting with an autistic child. This robot has the ability to track the child with its 3 degree of freedom (DOF) eyes and 3-DOF head, open and close its 1-DOF beak and 1-DOF each eyelids, raise its 1-DOF each wings, play sound, and record sound. These attributes will give it the ability to be used for the diagnosis and treatment of autism. As part of this project, the robot and the electronic and control software have been developed, and integrating semi-autonomous interaction, teleoperation from a remote healthcare provider and initiating trials with children in a local clinic are in progress.

A Miniature MRI-Compatible Fiber-optic Force Sensor Utilizing Fabry-Perot Interferometer

Abstract: Magnetic resonance imaging provides superior imaging capability because of unmatched soft tissue contrast and inherent three-dimensional visualization. Force sensing in robot-assisted systems is crucial for providing tactile feedback and measuring tissue interaction forces in needle-based percutaneous procedures in MRI. To address the issues imposed by electromagnetic compatibility in the high-field MRI and mechanical constraints due to the confined close-bore space, this paper proposes a miniaturized fiber optic force sensor utilizing Fabry-Perot interferometry. An opto-electromechanical system is designed to experimentally validate the optical model of the sensor and evaluate its sensing capability. Calibration was performed under static and dynamics loading conditions. The experimental results indicate a gage sensitivity on the order of 40 (mV/μe) of the sensor and a sensing range of 10 Newton. This sensor achieves high-resolution needle insertion force sensing in a robust and compact configuration in MRI environment.

High-field MRI-compatible needle placement robot for prostate interventions.

Abstract: This paper presents the design of a magnetic resonance imaging (MRI) compatible needle placement system actuated by piezoelectric actuators for prostate brachytherapy and biopsy. An MRI-compatible modular 3 degree-of-freedom (DOF) needle driver module coupled with a 3-DOF x-y-z stage is proposed as a slave robot to precisely deliver radioactive brachytherapy seeds under interactive MRI guidance. The needle driver module provides for needle cannula rotation, needle insertion and cannula retraction to enable the brachytherapy procedure with the preloaded needles. The device mimics the manual physician gesture by two point grasping (hub and base) and provides direct force measurement of needle insertion force by fiber optic force sensors. The fabricated prototype is presented and an experiment with phantom trials in 3T MRI is analyzed to demonstrate the system compatibility.

Approaches to creating and controlling motion in MRI

Abstract: Magnetic Resonance Imaging (MRI) can provide three dimensional (3D) imaging with excellent resolution and sensitivity making it ideal for guiding and monitoring interventions. The development of MRI-compatible interventional devices is complicated by factors including: the high magnetic field strength, the requirement that such devices should not degrade image quality, and the confined physical space of the scanner bore. Numerous MRI guided actuated devices have been developed or are currently being developed utilizing piezoelectric actuators as their primary means of mechanical energy generation to enable better interventional procedure performance. While piezoelectric actuators are highly desirable for MRI guided actuation for their precision, high holding force, and non-magnetic operation they are often found to cause image degradation on a large enough to scale to render live imaging unusable. This paper describes a newly developed piezoelectric actuator driver and control system designed to drive a variety of both harmonic and non-harmonic motors that has been demonstrated to be capable of operating both harmonic and non-harmonic piezoelectric actuators with less than 5% SNR loss under closed loop control. The proposed system device allows for a single controller to control any supported actuator and feedback sensor without any physical hardware changes.

Piezoelectric driven non-toxic injector for automated cell manipulation.

Abstract: Stimulated by state-of-the-art robotic and computer technology, Intra Cytoplasmic Sperm Injection (ICSI) automation aims to scale and seamlessly transfer the human hand movements into more precise and fast movements of the micro manipulator. Piezo-drill cell injection, a novel technique using piezo-driven pipettes with a very small mercury column, has significantly improves the survival rates of ICSI process. It is found that complications are due, in large part, to toxicity of mercury and the damage to the cell membrane because of the lateral tip oscillations of injector pipette. In this paper, a new design of piezo-driven cell injector is proposed for automated suspended cell injection. This new piezo-driven cell injector design centralizes the piezo oscillation power on the injector pipette which eliminates the vibration effect on other parts of the micromanipulator. Detrimental lateral tip oscillations of the injector pipette are attenuated to a desirable level even without the help of mercury column. This mercury-free injector can sublime the piezoelectric driven injection technique to completely non-toxic level with great research and commercial application in gene injection, in-vitro fertilization, ICSI and drug development.

Reconfigurable MRI-guided robotic surgical manipulator: Prostate brachytherapy and neurosurgery applications

Abstract: This paper describes a modular design approach for robotic surgical manipulator under magnetic resonance imaging (MRI) guidance. The proposed manipulator provides 2 degree of freedom (DOF) Cartesian motion and 2-DOF pitch and yaw motion. Primarily built up with dielectric materials, it utilizes parallel mechanism and is compact in size to fit into the limited space of close-bore MRI scanner. It is ideal for needle based surgical procedures which usually require positioning and orientation control for accurate imaging plane alignment. Specifically, this mechanism is easily reconfigurable to over constrained manipulator structure which provides 2-DOF Cartesian motion by simple structure modification. This modular manipulator integrated with different end-effector modules is investigated for prostate brachytherapy and neu-rosurgery applications as preliminary evaluation.