High‐entropy (HE) oxides have become increasingly popular as electromagnetic wave‐absorbing materials owing to their customizable structure and unique HE effects. However, the weak loss property of single‐phase HE ceramics and the approaches implemented to improve them based on semi‐empirical rules severely limit their development. Herein, two biphasic HE oxides are prepared by simple sintering to realize accurate regulation of crystal phases and structural defects. It is verified that HE effects cause various defects that are beneficial for microwave dissipation within complex‐phase ceramics. In spinel/perovskite HE oxides, around the interface of spinel (111) and perovskite (110) planes, notable stress concentrations and lattice distortions are directly observed, inducing numerous point defects and stacking faults. Interestingly, besides the existing heterogeneous interface of rock salt (220)/spinel (220) plane and defects, rock salt/spinel HE oxides enabled synergistic effects via the precise regulation of components’ phase. Driven by structural defects and multi‐phases in HE complexes, the intense polarization is evidently found, confirmed by the first‐principles calculations. Accordingly, the two complex‐phase HE oxides demonstrate excellent microwave absorption performance, and the minimal reflection loss of −54.5 dB is achieved. Therefore, this study provides valuable guidelines for the design of microwave absorbers using HE oxides.

Structural Defects in Phase‐Regulated High‐Entropy Oxides toward Superior Microwave Absorption Properties

Abstract Developing megahertz (MHz) electromagnetic wave (EMW) absorption materials with broadband absorption, multi-temperature adaptability, and facile preparation method remains a challenge. Herein, nanocrystalline FeCoNiCr 0.4 Cu 0.2 high-entropy alloy powders (HEAs) with both large aspect ratios and thin intergranular amorphous layers are constructed by a multistage mechanical alloying strategy, aiming to achieve excellent and temperature-stable permeability and EMW absorption. A single-phase face-centered cubic structure with good ductility and high crystallinity is obtained as wet milling precursors, via precisely controlling dry milling time. Then, HEAs are flattened to improve aspect ratios by synergistically regulating wet milling time. FeCoNiCr 0.4 Cu 0.2 HEAs with dry milling 20 h and wet milling 5 h (D20) exhibit higher and more stable permeability because of larger aspect ratios and thinner intergranular amorphous layers. The maximum reflection loss ( RL ) of D20/SiO 2 composites is greater than − 7 dB with 5 mm thickness, and EMW absorption bandwidth ( RL &lt; − 7 dB) can maintain between 523 and 600 MHz from − 50 to 150 °C. Furthermore, relying on the “cocktail effect” of HEAs, D20 sample also exhibits excellent corrosion resistance and high Curie temperature. This work provides a facile and tunable strategy to design MHz electromagnetic absorbers with temperature stability, broadband, and resistance to harsh environments. 

/pdf/microstructure-design-of-high-entropy-alloys-through-a-1d5p7ggh.pdf

Microstructure Design of High-Entropy Alloys Through a Multistage Mechanical Alloying Strategy for Temperature-Stable Megahertz Electromagnetic Absorption

/pdf/microstructure-design-of-high-entropy-alloys-through-a-ea0gta4r.pdf

Phosphors for near-ultraviolet (NUV)-triggered white light-emitting diodes (LEDs) have become an attractive research topic in recent years. However, it is still difficult for phosphors to have simultaneous high luminous intensity, superior color purity, and excellent thermal stability. Hence, a series of Eu3+-activated alkali rare-earth double-tungstate nanoparticles with high luminescence intensity were prepared by a facile hydrothermal reaction method. The influence of rare-earth ions and alkali cations on the luminescence properties was investigated. Impressively, the prepared phosphors exhibit superior color purity and excellent thermal stability. Meanwhile, the emission intensity and color purity can be controlled by tuning the concentrations of Eu3+ ions. By employing the resultant nanoparticles, a fabricated LED device emitted bright warm white light with a high color rendering index (CRI) of 92.12 and a suitable correlated color temperature (CCT) of 4689 K. This work straightly confirms that the prepared phosphors are promising candidates as red-emitting components applied in NUV-triggered indoor illumination. 

Eu3+-Activated Alkali Rare-Earth Double-Tungstate Nanoparticles for Near-Ultraviolet-Light-Triggered Indoor Illumination

High‐entropy oxides (HEO) with high stability and designability are potential microwave absorbers that serve in harsh environments. However, loss design is critical for the absorption performance of HEO due to its weak intrinsic loss capability. Inadequate loss ability results in considerable secondary reflection. Here, an in situ conductive heterogeneous phase is constructed in (Fe0.2xCo0.2Ni0.2Cr0.2Mn0.2)3O4 (x = 1–5) using a reductive circumstance, to form a dual‐phase composite. Both the ohmic and dielectric loss are enhanced as the conductive phase is introduced, while great impedance matching condition is well maintained. Hence, the composites can achieve substantial absorption across the whole X or Ku band with a thin thickness. Furthermore, key efforts are made to reveal the relationship between the absorbing performance and loss capability of an absorber. The analytical expression of the theoretical threshold of attenuation constant is derived. Based on the statistics of experimental data, the broad feasibility and practicability of the proposed theoretical threshold of attenuation constant are confirmed and discussed. Combined with both the theoretical and experimental studies, the mechanism by which the conductive phase contributes to increased absorption is also disclosed, providing an effective basis for the loss design of broadband microwave absorbers.

Quantitative Evaluation of Loss Capability for In Situ Conductive Phase Enhanced Microwave Absorption of High‐Entropy Transition Metal Oxides

Efficient and stable electromagnetic-wave (EMW) absorption materials have attracted great attention in the field of reducing microwave pollution. Herein, FeCoNiCuTix high-entropy alloys (HEAs) as electromagnetic-wave absorbing materials were prepared by a high-energy ball-milling method. The as-milled HEA powders presented a flaky shape with a high aspect ratio. Impedance matching was efficiently optimized by severe lattice distortion, which was caused by Ti incorporation. The introduced plentiful defects in FeCoNiCuTix HEAs provided abundant polarization sites for dielectric loss. By tuning Ti contents, FeCoNiCuTi0.2 HEAs delivered excellent EMW absorption performances. The maximal reflection loss (RLmax) values reached -47.8 dB at 10.86 GHz as thin as 2.16 mm, and the widest bandwidth was 4.76 GHz (5.97-10.73 GHz). Furthermore, the introduction of Ti enhanced corrosion resistance via increasing the charge transfer resistance of a passivated film. Those characteristics of FeCoNiCuTix HEAs made these materials a practical gigahertz-range EMW absorber. Additionally, our findings provided a facile and tunable strategy for designing EMW absorbing materials, which was aimed at lightweight, highly efficient absorption, and resistance to harsh environments.

Enhanced Electromagnetic-Wave Absorbing Performances and Corrosion Resistance via Tuning Ti Contents in FeCoNiCuTix High-Entropy Alloys.

/pdf/sol-gel-auto-combustion-synthesis-and-luminescence-9ljj582y.pdf

Sol-gel auto-combustion synthesis and luminescence properties of GdCaAl3O7: RE3+ (RE=Eu, Tb, Eu@Tb) phosphors for near-ultraviolet light-triggered indoor illumination

FeCoNiCuxMn (x = 0, 0.1, 0.3, 0.5, 0.7 and 0.9) and FeCoNiCu0.1MnB0.05 high entropy alloys (HEAs) were prepared by an improved swing ball-milling method. The BCC structure and FCC structure...

Ultrawide-frequency Electromagnetic-Wave Absorption Based on FeCoNiCuxMn High Entropy Alloys Synthesized through Swing Ball-milling

Excellent Electromagnetic-Wave Absorbing Performances and Great Harsh-Environment Resistance of Feconicrxmn High Entropy Alloys

The development of microwave absorption materials with good environmental adaptability is a hot topic in the electromagnetic protection field. In this research, Expanded graphite (EG)/ZIF-67 nanocubes-derived ([email protected]) composites were successfully fabricated by electrostatic assembly and subsequent heat treatment. The results show that the involvement of an appropriate content of [email protected] not only overcomes the problem of single EG impedance mismatch but also introduces additional magnetic loss for the absorber. At the thicknesses of 1.6 mm and 1.5 mm, an effective absorption bandwidth (EAB) of 4.52 GHz and a minimum reflection loss (RLmin) of -48.4 dB were achieved for the Z2-700 sample with a low filling ratio (20 wt%). The enhancement of EMW-absorption performance is attributed to the optimization of impedance matching and the synergistic action between multiple loss mechanisms. Electrochemical corrosion test showed that graphite nanoflakes of EG enhanced the transfer resistance during corrosion, and the corrosion resistance of pure [email protected] was enhanced with the protection of EG. This work provides a reasonable attempt to design and fabricate efficient microwave absorption materials suitable for harsh environments. 

Haoran Zhou

Papers

Enhanced Electromagnetic-Wave Absorbing Performances and Corrosion Resistance via Tuning Ti Contents in FeCoNiCuTix High-Entropy Alloys.

Sol-gel auto-combustion synthesis and luminescence properties of GdCaAl3O7: RE3+ (RE=Eu, Tb, Eu@Tb) phosphors for near-ultraviolet light-triggered indoor illumination

Ultrawide-frequency Electromagnetic-Wave Absorption Based on FeCoNiCuxMn High Entropy Alloys Synthesized through Swing Ball-milling

Excellent Electromagnetic-Wave Absorbing Performances and Great Harsh-Environment Resistance of Feconicrxmn High Entropy Alloys

Expanded graphite/Co@C composites with dual functions of corrosion resistance and microwave absorption