In the critical area of sustainable energy storage, solid-state batteries have attracted considerable attention due to their potential safety, energy-density and cycle-life benefits. This Review describes recent progress in the fundamental understanding of inorganic solid electrolytes, which lie at the heart of the solid-state battery concept, by addressing key issues in the areas of multiscale ion transport, electrochemical and mechanical properties, and current processing routes. The main electrolyte-related challenges for practical solid-state devices include utilization of metal anodes, stabilization of interfaces and the maintenance of physical contact, the solutions to which hinge on gaining greater knowledge of the underlying properties of solid electrolyte materials. Solid-state batteries are attractive due to their potential safety, energy-density and cycle-life benefits. Recent progress in understanding inorganic solid electrolytes considering multiscale ion transport, electrochemical and mechanical properties, and processing are discussed.

Fundamentals of inorganic solid-state electrolytes for batteries

Among the contenders in the new generation energy storage arena, all-solid-state batteries (ASSBs) have emerged as particularly promising, owing to their potential to exhibit high safety, high energy density and long cycle life. The relatively low conductivity of most solid electrolytes and the often sluggish charge transfer kinetics at the interface between solid electrolyte and electrode layers are considered to be amongst the major challenges facing ASSBs. This review presents an overview of the state of the art in solid lithium and sodium ion conductors, with an emphasis on inorganic materials. The correlations between the composition, structure and conductivity of these solid electrolytes are illustrated and strategies to boost ion conductivity are proposed. In particular, the high grain boundary resistance of solid oxide electrolytes is identified as a challenge. Critical issues of solid electrolytes beyond ion conductivity are also discussed with respect to their potential problems for practical applications. The chemical and electrochemical stabilities of solid electrolytes are discussed, as are chemo-mechanical effects which have been overlooked to some extent. Furthermore, strategies to improve the practical performance of ASSBs, including optimizing the interface between solid electrolytes and electrode materials to improve stability and lower charge transfer resistance are also suggested.

/pdf/new-horizons-for-inorganic-solid-state-ion-conductors-3w5lzxuciv.pdf

New horizons for inorganic solid state ion conductors

Solid-state batteries have been attracting wide attention for next generation energy storage devices due to the probability to realize higher energy density and superior safety performance compared with the state-of-the-art lithium ion batteries. However, there are still intimidating challenges for developing low cost and industrially scalable solid-state batteries with high energy density and stable cycling life for large-scale energy storage and electric vehicle applications. This review presents an overview on the scientific challenges, fundamental mechanisms, and design strategies for solid-state batteries, specifically focusing on the stability issues of solid-state electrolytes and the associated interfaces with both cathode and anode electrodes. First, we give a brief overview on the history of solid-state battery technologies, followed by introduction and discussion on different types of solid-state electrolytes. Then, the associated stability issues, from phenomena to fundamental understandings, are intensively discussed, including chemical, electrochemical, mechanical, and thermal stability issues; effective optimization strategies are also summarized. State-of-the-art characterization techniques and in situ and operando measurement methods deployed and developed to study the aforementioned issues are summarized as well. Following the obtained insights, perspectives are given in the end on how to design practically accessible solid-state batteries in the future.

Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces

All-solid-state lithium ion batteries may become long-term, stable, high-performance energy storage systems for the next generation of electric vehicles and consumer electronics, depending on the compatibility of electrode materials and suitable solid electrolytes. Nickel-rich layered oxides are nowadays the benchmark cathode materials for conventional lithium ion batteries because of their high storage capacity and the resulting high energy density, and their use in solid-state systems is the next necessary step. In this study, we present the successful implementation of a Li[Ni,Co,Mn]O2 material with high nickel content (LiNi0.8Co0.1Mn0.1O2, NCM-811) in a bulk-type solid-state battery with β-Li3PS4 as a sulfide-based solid electrolyte. We investigate the interface behavior at the cathode and demonstrate the important role of the interface between the active materials and the solid electrolyte for the battery performance. A passivating cathode/electrolyte interphase layer forms upon charging and leads to...

Capacity Fade in Solid-State Batteries: Interphase Formation and Chemomechanical Processes in Nickel-Rich Layered Oxide Cathodes and Lithium Thiophosphate Solid Electrolytes

Increasing the specific energy, energy density, specific power, energy efficiency and energy retention of electrochemical storage devices are major incentives for the development of all-solid-state batteries. However, a general evaluation of all-solid-state battery performance is often difficult to derive from published reports, mostly due to the interdependence of performance measures, but also due to the lack of a basic reference system. Here, we present all-solid-state batteries reduced to the bare minimum of compounds, containing only a lithium metal anode, β-Li3PS4 solid electrolyte and Li(Ni0.6Co0.2Mn0.2)O2 cathode active material. We use this minimalistic system to benchmark the performance of all-solid-state batteries. In a Ragone-type graph, we compare literature data for thiophosphate-, oxide-, phosphate- and polymer-based all-solid-state batteries with our minimalistic cell. Using fundamental equations for key performance parameters, we identify research targets towards high energy, high power and practical all-solid-state batteries. Considering the interdependence of performance measures and the lack of a basic reference system for all-solid-state batteries, Jurgen Janek and co-workers analyse literature performance data for major types of all-solid-state batteries and benchmark them against minimalistic reference cells.

Benchmarking the performance of all-solid-state lithium batteries

All-solid-state lithium-ion batteries have the potential to become an important class of next-generation electrochemical energy storage devices. However, for achieving competitive performance, a better understanding of the interfacial processes at the electrodes is necessary for optimized electrode compositions to be developed. In this work, the interfacial processes between the solid electrolyte (Li10GeP2S12) and the electrode materials (In/InLi and LixCoO2) are monitored using impedance spectroscopy and galvanostatic cycling, showing a large resistance contribution and kinetic hindrance at the metal anode. The effect of different fractions of the solid electrolyte in the composite cathodes on the rate performance is tested. The results demonstrate the necessity of a carefully designed composite microstructure depending on the desired applications of an all-solid-state battery. While a relatively low mass fraction of solid electrolyte is sufficient for high energy density, a higher fraction of solid elec...

Interfacial Processes and Influence of Composite Cathode Microstructure Controlling the Performance of All-Solid-State Lithium Batteries

Rechargeable solid-state lithium ion batteries (SSLB) require fast ion conducting solid electrolytes (SEs) to enable high charge and discharge rates. Li7P3S11 is a particularly promising lithium solid electrolyte, exhibiting very high room temperature conductivities of up to 17 mS·cm–1 and high ductility, allowing fast ion transport through the bulk and intimate contact to high surface electrodes. Here we present a novel hot-press setup that facilitates the synthesis of solid electrolytes by combining in situ electrochemical impedance spectroscopy (EIS) with simultaneous temperature- and pressure-monitoring. While a high room temperature conductivity in the order of 10 mS·cm–1 is readily achieved for phase pure Li7P3S11 with this design, it further enables monitoring of the different steps of crystallization from an amorphous Li2S–P2S5 glass to triclinic Li7P3S11. Nucleation, crystallization and—at temperatures exceeding 280 °C—decomposition of the material are analyzed in real time, enabling process opti...

Harald Weigand

Papers

Interfacial Processes and Influence of Composite Cathode Microstructure Controlling the Performance of All-Solid-State Lithium Batteries

In Situ Monitoring of Fast Li-Ion Conductor Li7P3S11 Crystallization Inside a Hot-Press Setup