A ceramic fuel cell in an all solid-state energy conversion device that produces electricity by electrochemically combining fuel and oxidant gases across an ionic conducting oxide. Current ceramic fuel cells use an oxygen-ion conductor or a proton conductor as the electrolyte and operate at high temperatures (>600°C). Ceramic fuel cells, commonly referred to as solid-oxide fuel cells (SOFCs), are presently under development for a variety of power generation applications. This paper reviews the science and technology of ceramic fuel cells and discusses the critical issues posed by the development of this type of fuel cell. The emphasis is given to the discussion of component materials (especially, ZrO2 electrolyte, nickel/ZrO2 cermet anode, LaMnO3 cathode, and LaCrO3 interconnect), gas reactions at the electrodes, stack designs, and processing techniques used in the fabrication of required ceramic structures.

Ceramic Fuel Cells

II. Structure of Perovskites 1982 A. Crystal Structure 1982 B. Nonstoichiometry in Perovskites 1983 1. Oxygen Nonstoichiometry 1983 2. Cation Nonstoichiometry 1984 C. Physical Properties 1985 D. Adsorption Properties 1986 1. CO and NO Adsorption 1986 2. Oxygen Adsorption 1987 E. Specific Surface and Porosity 1987 F. Thermal Stability in a Reducing Atmosphere 1989 III. Acid−Base and Redox Properties 1990 A. Acidity and Basicity 1990 B. Redox Processes 1991 1. Kinetics and Mechanisms 1992 2. Reduction−Oxidation Cycles 1993 C. Ion Mobility 1993 1. Oxygen Transport 1993 2. Cation Transport 1994 IV. Heterogeneous Catalysis 1995 A. Oxidation Reactions 1995 1. CO Oxidation 1995 2. Oxidation of Hydrocarbons 1996 B. Pollution Abatement 2001 1. NOx Decomposition 2001 2. Exhaust Treatment 2002 3. Stability 2004 C. Hydrogenation and Hydrogenolysis Reactions 2004 1. Hydrogenation of Carbon Oxides 2004 2. Hydrogenation and Hydrogenolysis Reactions 2006

Chemical structures and performance of perovskite oxides.

In this review the phenomenon of proton conductivity in materials and the elements of proton conduction mechanismsproton transfer, structural reorganization and diffusional motion of extended moietiesare discussed with special emphasis on proton chemistry. This is characterized by a strong proton localization within the valence electron density of electronegative species (e.g., oxygen, nitrogen) and self-localization effects due to solvent interactions which allows for significant proton diffusivities only when assisted by the dynamics of the proton environment in Grotthuss and vehicle type mechanisms. In systems with high proton density, proton/proton interactions lead to proton ordering below first-order phase transition rather than to coherent proton transfers along extended hydrogen-bond chains as is frequently suggested in textbooks of physical chemistry. There is no indication for significant proton tunneling in fast proton conduction phenomena for which almost barrierless proton transfer is suggest...

Proton Conductivity: Materials and Applications

Recent worldwide interest in building a decentralized, hydrogen-based energy economy has refocused attention on the solid oxide fuel cell (SOFC) as a potential source of efficient, environmentally friendly, fuel-versatile electric power. Due to its high operating temperature, the SOFC offers several potential advantages over polymer-based fuel cells, including reversible electrode reactions, low internal resistance, high tolerance to typical catalyst poisons, production of high-quality waste heat for (among other uses) reformation of hydrocarbon fuels, as well as the possibility of burning hydrocarbon fuels directly. Today, SOFCs are much closer to commercial reality than they were 20 years ago, due largely to technological advances in electrode material composition, microstructure control, thin-film ceramic fabrication, and stack and system design. These advances have led to dozens of active SOFC development programs in both stationary and mobile power and contributed to commercialization or development in a number of related technologies, including gas sensors,1 solid-state electrolysis devices,2 and iontransport membranes for gas separation and partial oxidation.3 Many reviews are available which summarize the technological advances made in SOFCs over the last 15-35 yearssreaders who are primarily interested in knowing the state-of-the art in materials, design, and fabrication (including the electrodes) are encouraged to consult these reviews.4-12 This review focuses on the factors governing SOFC cathode performancesadvances we have made over † Dedicated to Brian Steele, 1929-2003. Researcher, Entrepreneur, Consensus Seeker. 4791 Chem. Rev. 2004, 104, 4791−4843

Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes

Fuel cells are uniquely capable of overcoming combustion efficiency limitations (e.g., the Carnot cycle). However, the linking of fuel cells (an energy conversion device) and hydrogen (an energy carrier) has emphasized investment in proton-exchange membrane fuel cells as part of a larger hydrogen economy and thus relegated fuel cells to a future technology. In contrast, solid oxide fuel cells are capable of operating on conventional fuels (as well as hydrogen) today. The main issue for solid oxide fuel cells is high operating temperature (about 800°C) and the resulting materials and cost limitations and operating complexities (e.g., thermal cycling). Recent solid oxide fuel cells results have demonstrated extremely high power densities of about 2 watts per square centimeter at 650°C along with flexible fueling, thus enabling higher efficiency within the current fuel infrastructure. Newly developed, high-conductivity electrolytes and nanostructured electrode designs provide a path for further performance improvement at much lower temperatures, down to ~350°C, thus providing opportunity to transform the way we convert and store energy.

Hiroyasu Iwahara

Papers

Protonic conduction in Zr-substituted BaCeO3

Protonic conduction in calcium, strontium and barium zirconates

Technological challenges in the application of proton conducting ceramics

Prospect of hydrogen technology using proton-conducting ceramics

Oxide ion conductors based on bismuthsesquioxide