Multilevel inverter technology has emerged recently as a very important alternative in the area of high-power medium-voltage energy control. This paper presents the most important topologies like diode-clamped inverter (neutral-point clamped), capacitor-clamped (flying capacitor), and cascaded multicell with separate DC sources. Emerging topologies like asymmetric hybrid cells and soft-switched multilevel inverters are also discussed. This paper also presents the most relevant control and modulation methods developed for this family of converters: multilevel sinusoidal pulsewidth modulation, multilevel selective harmonic elimination, and space-vector modulation. Special attention is dedicated to the latest and more relevant applications of these converters such as laminators, conveyor belts, and unified power-flow controllers. The need of an active front end at the input side for those inverters supplying regenerative loads is also discussed, and the circuit topology options are also presented. Finally, the peripherally developing areas such as high-voltage high-power devices and optical sensors and other opportunities for future development are addressed.

Multilevel inverters: a survey of topologies, controls, and applications

Multilevel voltage source converters are emerging as a new breed of power converter options for high-power applications. The multilevel voltage source converters typically synthesize the staircase voltage wave from several levels of DC capacitor voltages. One of the major limitations of the multilevel converters is the voltage unbalance between different levels. The techniques to balance the voltage between different levels normally involve voltage clamping or capacitor charge control. There are several ways of implementing voltage balance in multilevel converters. Without considering the traditional magnetic coupled converters, this paper presents three recently developed multilevel voltage source converters: (1) diode-clamp, (2) flying-capacitors, and (3) cascaded-inverters with separate DC sources. The operating principle, features, constraints, and potential applications of these converters are discussed.

/pdf/multilevel-converters-a-new-breed-of-power-converters-wavnnh62ti.pdf

Multilevel converters-a new breed of power converters

This paper presents transformerless multilevel power converters as an application for high-power and/or high-voltage electric motor drives. Multilevel converters: (1) can generate near-sinusoidal voltages with only fundamental frequency switching; (2) have almost no electromagnetic interference or common-mode voltage; and (3) are suitable for large voltampere-rated motor drives and high voltages. The cascade inverter is a natural fit for large automotive all-electric drives because it uses several levels of DC voltage sources, which would be available from batteries or fuel cells. The back-to-back diode-clamped converter is ideal where a source of AC voltage is available, such as in a hybrid electric vehicle. Simulation and experimental results show the superiority of these two converters over two-level pulsewidth-modulation-based drives.

/pdf/multilevel-converters-for-large-electric-drives-12d3pkg9uz.pdf

Multilevel converters for large electric drives

This paper discusses the modular multilevel cascade converter (MMCC) family based on cascade connection of multiple bidirectional chopper cells or single-phase full-bridge cells. The MMCC family is classified from circuit configuration as follows: the single-star bridge cells (SSBC); the single-delta bridge cells (SDBC); the double-star chopper cells (DSCC); and the double-star bridge cells (DSBC). The term MMCC corresponds to a family name in a person while, for example, the term SSBC corresponds to a given name. Therefore, the term “MMCC-SSBC” can identify the circuit configuration without any confusion. Among the four MMCC family members, the SSBC and DSCC are more practical in cost, performance, and market than the others although a distinct difference exists in application between the SSBC and DSCC. This paper presents application examples of the SSBC to a battery energy storage system (BESS), the SDBC to a static synchronous compensator (STATCOM) for negative-sequence reactive-power control, and the DSCC to a motor drive for fans and blowers, along with their experimental results.

Classification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)

This paper introduces a general space vector modulation algorithm for n-level three-phase power converters. This algorithm is computationally extremely efficient and is independent of the number of levels of the power converter. At the same time, it provides excellent insight into the operation of multilevel power converters.

A fast space vector modulation algorithm for multilevel three-phase converters

The development of large induction motor drives with low torque ripple and fast dynamic response for new or retrofit applications has been limited by the device ratings and problems of series connections. This paper investigates the use of a five-level GTO voltage-sourced inverter for large induction motor drives. The advantages of such a drive are that single GTO thyristors may be used at each level, thereby avoiding the need for series connection of the thyristors. The thyristors are well protected from overvoltages by the clamping action of the DC supply capacitors. The disadvantages are that each DC level requires a separate supply, four in the case of the five-level inverter, and that the devices are not equally loaded. This paper reviews the basic operation of the five-level inverter and possible PWM voltage/frequency control techniques for the specific application of induction motor drives. The simulation results clearly show the unequal loading of the devices and the need for independent voltage supplies for the five levels. It is shown that a combination of several PWM techniques offers the best solution for the drives application. The conclusions indicate that large induction motors with ratings up to 22 MVA, 7.46 kV may be supplied by the five-level inverter using available 4.5 kV, 3.0 kA GTO thyristors. The recommended supply for such an inverter with full regenerative operation over the complete speed range is four, four-quadrant converters in a quasi-24-pulse configuration. >

J.K. Steinke

Papers

Five-level GTO inverters for large induction motor drives