Fatigue crack propagation in engineering materials has been the subject of considerable research, and extensive review articles have appeared over the past several years. Most of these investigations focused on the behaviour of ‘long’ fatigue cracks, even though the characteristics associated with the extension of small cracks in metals and alloys remain relatively unexplored, despite their unquestionable importance from an engineering standpoint. In this review, the mechanics and micromechanisms of the subcritical growth of short fatigue cracks are examined, and aspects of their propagation behaviour are contrasted with those of long cracks in terms of fracture mechanics, microstructure, and environment. Cracks are defined as being short (i) when their length is small compared to relevant microstructural dimensions (a continuum mechanics limitation), (ii) when their length is small compared to the scale of local plasticity (a linear elastic fracture mechanics limitation), or (iii) when they are s...

Propagation of short fatigue cracks

Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. I: Basic fatigue mechanism and evaluation of correlation between the fatigue fracture stress and the size and location of non-metallic inclusions

The effects of grain size and crack length on the threshold condition of fatigue growth of small cracks are analysed both theoretically and experimentally. The theoretical model is based on the assumption that the threshold condition is determined by whether the crack-tip slip band blocked by the grain boundary propagates into an adjacent grain or not. By comparing the model analysis with the experiments of mild steel, it was found that the threshold stress estimated from the fatigue limit of the smooth specimen gave the effective components of the applied stress. When the threshold stress normalized by the fatigue limit of the smooth specimen was correlated to the crack length normalized by a certain crack length, the theoretical relation was found to agree well with the experimental data. From a further analysis of the published data of various materials, the theoretical normalized relation was found to give a lower bound of the threshold values of the stress and the stress intensity factor. A deviation from the theoretical relation seen in the cases of hard metals was explained through an extension of the model by regarding that hard metals contained initial, inherent flaws even in the smooth specimen.

Fatigue growth threshold of small cracks

In this model the growth of a crack is analysed in terms of the successive blocking of the plastic zone by slip barriers (e.g. grain boundaries) and the subsequent initiation of the slip in the next grain. The discontinuous character of the slip process (slip jumps) plays a fundamental role in the model. The factor governing the transfer of slip across a grain boundary is considered to be the stress concentration ahead of the plastic zone which, for a constant applied stress τ, is found to be dependent only on a parameter n = a/c defining the position of the crack tip relative to the grain boundary. The discrete behaviour of the slip has a strong influence in the short-crack period and hence cannot be neglected in the analysis of the crack growth rate. This period is characterized by large variations in the parameter n. In the long-crack period the slip jumps do not influence the overall description of the growth and the parameter n is almost constant. By making the crack extension per cycle prop...

Short and long fatigue crack growth: A unified model

https://www2.lbl.gov/ritchie/Library/PDF/1986_Ritchie_MatSciEng_SmallFatigueCracks.pdf

J. Lankford

Papers

Initiation and early growth of fatigue cracks in high strength steel