Additive manufacturing of metallic components – Process, structure and properties

Unlike conventional materials removal methods, additive manufacturing (AM) is based on a novel materials incremental manufacturing philosophy. Additive manufacturing implies layer by layer shaping and consolidation of powder feedstock to arbitrary configurations, normally using a computer controlled laser. The current development focus of AM is to produce complex shaped functional metallic components, including metals, alloys and metal matrix composites (MMCs), to meet demanding requirements from aerospace, defence, automotive and biomedical industries. Laser sintering (LS), laser melting (LM) and laser metal deposition (LMD) are presently regarded as the three most versatile AM processes. Laser based AM processes generally have a complex non-equilibrium physical and chemical metallurgical nature, which is material and process dependent. The influence of material characteristics and processing conditions on metallurgical mechanisms and resultant microstructural and mechanical properties of AM proc...

Laser additive manufacturing of metallic components: materials, processes and mechanisms

The mechanical behavior, and thus ‘trustworthiness’/durability, of engineering components fabricated via laser-based additive manufacturing (LBAM) is still not well understood. This is adversely affecting the continual adoption of LBAM for part fabrication/repair within the global industry at large. Hence, it is important to determine the mechanical properties of parts fabricated via LBAM as to predict their performance while in service. This article is part of two-part series that provides an overview of Direct Laser Deposition (DLD) for additive manufacturing (AM) of functional parts. The first part (Part I) provides a general overview of the thermo-fluid physics inherent to the DLD process. The objective of this current article (Part II) is to provide an overview of the mechanical characteristics and behavior of metallic parts fabricated via DLD, while also discussing methods to optimize and control the DLD process. Topics to be discussed include part microstructure, tensile properties, fatigue behavior and residual stress – specifically with their relation to DLD and post-DLD process parameters (e.g. heat treatment, machining). Methods for controlling/optimizing the DLD process for targeted part design will be discussed – with an emphasis on monitored part temperature and/or melt pool morphology. Some future challenges for advancing the knowledge in AM-part adoption are discussed. Despite various research efforts into DLD characteristics and process optimization, it is clear that there are still many areas that require further investigation.

An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control

Direct metal deposition technology is an emerging laser aided manufacturing technology based on a new additive manufacturing principle, which combines laser cladding with rapid prototyping into a solid freeform fabrication process that can be used to manufacture near net shape components from their CAD files. In the present study, direct metal deposition technology was successfully used to fabricate a series of samples of the Ni-based superalloy Inconel 625. A high power CO2 laser was used to create a molten pool on the Inconel 625 substrate into which an Inconel 625 powder stream was delivered to create a 3D object. The structure and properties of the deposits were investigated using optical and scanning electron microscopy, X-ray diffraction and microhardness test. The microstructure has been found to be columnar dendritic in nature, which grew epitaxially from the substrate. The thermal stability of the dendritic morphology was investigated in the temperature range 800–1200 °C. These studies demonstrate that Inconel 625 is an attractive material for laser deposition as all samples produced in this study are free from relevant defects such as cracks, bonding error and porosity.

Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability

https://engineering.purdue.edu/cdesign/wp/wp-content/uploads/2014/08/JCP_2014.pdf

Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO 2 laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.

J. Negi

Papers

Investigating laser rapid manufacturing for Inconel-625 components

Laser rapid manufacturing of Colmonoy-6 components