A packet-centric wireless system includes: a wireless base station communicating via a transmission control protocol/internet protocol (TCP/IP) to a first data network; one or more host workstations communicating via TCP/IP to the first data network; one or more subscriber customer premise equipment (CPE) stations coupled with the wireless base station over a shared bandwidth via TCP/IP over a wireless medium; and one or more subscriber workstations coupled via TCP/IP to each of the subscriber CPE stations over a second network. The system can allocate shared bandwidth among the subscriber CPE stations to optimize end-user quality of service (QoS). The first data network includes at least one of: a wireline network; a wireless network; a local area network (LAN); and a wide area network (WAN). The second network includes at least one of: a wireline network; a wireless network; a local area network (LAN); and a wide area network (WAN).

Transmission control protocol/internet protocol (tcp/ip) packet-centric wireless point to multi-point (ptmp) transmission system architecture

A multiple mode, personal, wireless communications system exists within a radiotelephone network serving general customers and provides additional services to a select group of customers. The system uses handsets (32) which automatically switch between a standard cellular radiotelephone mode of operation (1901) and an enhanced cordless mode (1420) when the handsets (32) are within range of pico cells (26) that are interconnected to the public switched telephone network (20). Each pico cell is controlled via a framework of overlay cells (10b) that operates independently of the radiotelephone network and uses a unique control protocol on a small number of reserved cellular channels. Each pico cell consists of a spectrally dynamic, non-capturing, frequency agile, multi-purpose base station (26) provided at customer-selected locations to cooperate with the overlay cell framework. Each pico cell is capable of supporting multiple handsets (32) and using low power operation that achieves limited coverage. Each pico cell reduces traffic on the standard cellular radiotelephone network by independently handling registered handsets (32). An alternate line option module (22) provides wireless local interconnect capability to selectively route call traffic between land lines (24) and the standard cellular radiotelephone network. Service control units (12) and host stations (17) facilitate wireless activation and control of each pico cell and handset (32) via the overlay cell framework.

Multiple mode personal wireless communications system

The present invention envisages a GSM mobile telephone in which a line of icons is displayed on a display. As a user navigates through the displayed line of icons, the positions of the icons alter so that the selectable icon moves to the head of the line. This approach makes it very clear (i) which icon is selectable at any time and (ii) where that icon sits in relation to other icons at the same functional level (e.g. only first level icons will be present in one line). First level icons typically relate to the following functions: phonebook; messages; call register; counters; call diversion; telephone settings; network details; voice mail and IrDA activation.

Mobile telephone with improved man machine interface

A mobile station communicates with both a cellular network, by which it is assigned a mobile identification number, and to a cordless cellular base station utilizing the same cellular frequency range and communications protocol. The cordless cellular base station is preferably connected to a public switched telephone network and is assigned a landline number. The cordless cellular base station acts as a conduit between the mobile station and the public switched telephone network. When the mobile station comes within range of a cordless cellular base station, it deregisters automatically from the cellular network and register with the cordless cellular base station. Once the mobile station is communicating with the cordless cellular base station, the cordless cellular base station communicates with the cellular network to instruct the cellular network to route all calls for mobile identification number to the cordless cellular base station's landline number. In addition, all calls placed on the mobile station are sent through the cordless cellular base station to the public switched telephone network. When the mobile station severs contact with the cordless cellular base station, the mobile station registers with the regional cellular base station of the regional cellular network. The cordless cellular base station then sends a network forwarding cancellation message to the cellular network to cancel the forwarding of calls for the mobile station's identification number. Once the mobile station is registered with the regional cell, calls to the mobile stations identification number are directly routed by the cellular network to the mobile station.

Cordless cellular system

An existing security association is re-established when a communication handover event occurs in a radio communications system such as IEEE 082.11 or a HIPERLAN wherein the existing security association between a mobile terminal and a wireless communication network is maintained when the communication handover occurs within the network. Authentication during a handover event is achieved by a challenge/response procedure. In accordance with the challenge/response procedure each member of a communication pair that is made up of a new access point and the mobile terminal that is experiencing a handover to the new access point sends a challenge to the other member of the communication pair. Each member of the communication pair then calculates a response to its received challenge, and these responses are sent back to the other member of the communication pair. Each member of the communication pair then compares its received response to a correct response. When these comparisons are correct, payload communication begins between the second access point and the mobile terminal.

Transfer of security association during a mobile terminal handover

Transceiver frequency and optionally power level are allocated to a radio personal communications system which includes a base station connected to a wire telephone network and a cellular terminal operating within a region of a wide area cellular network to minimize interference between communications over the wide area cellular network and communications between the base station and the cellular terminal. The same cellular terminal may thus be used to communicate over the lower cost wire network when within range of the base station and over the wide area cellular network otherwise. The frequency for communications between the cellular terminal and the base station are optionally assigned by the operator of the wide area cellular network so appropriate frequencies and power levels can be assigned for base stations, to minimize same channel interference with the wide area cellular network.

Radio personal communications system and method for allocating frequencies for communications between a cellular terminal and a base station

During handover of a cellular terminal from a wide area cellular network to a base station, authentication messages are relayed between the base station and the wide area cellular network via the cellular terminal. Communications between the cellular terminal and the wire telephone network via the base station are prevented until after authentication takes place. Accordingly, the cellular terminal relays authentication messages between the base station and the wide area cellular network. Use of the wire telephone network for authentication between the cellular terminal and the base station is avoided. Secure handover is thereby provided without incurring excess overhead to the system and without adding unnecessary wire network charges to the cellular terminal user.

Authentication and handover methods and systems for radio personal communications

A secure radio personal communication system and method includes a base station which relays cellular verification signals between a wide area cellular network and a cellular terminal via the wire telephone network. Thus, cellular telephone calls which are routed to a cellular terminal via a base station, when the cellular terminal is within a local region covered by the base station, may be exchanged between the cellular network and cellular terminal over the wire telephone network. Calls from the wide area cellular network which are routed through the base station can thus employ the same security systems and methods which are employed by the wide area cellular network. Signals between the base station and the cellular terminal are preferably exchanged when the cellular terminal is parked in the base station. Verification and encryption signals may be exchanged. The same signals may be used for enhanced security when the base station is relaying wire network calls to the cellular terminal when the cellular terminal is in the local region. Alternatively, separate verification and encryption protocols may be used.

Base station which relays cellular verification signals via a telephone wire network to verify a cellular radio telephone

A secure radio personal communication system and method includes a base station (110) which relays cellular verification signals between a wide area cellular network and a cellular terminal (120) via the wire telephone network (108). Thus, cellular telephone calls which are routed to a cellular terminal via a base station, when the cellular terminal is within a local region covered by the base station, may be exchanged between the cellular network and cellular terminal over the wire telephone network. Calls from the wide area cellular network which are routed through the base station can thus employ the same authorisation systems and methods which are employed by the wide area cellular network. Signals between the base station and the cellular terminal are preferably exchanged when the cellular terminal is parked in the base station. Verification and encryption signals may be exchanged. The same signals may be used for enhanced security when the base station is relaying wire network calls to the cellular terminal when the cellular terminal is in the local region. Alternatively, separate verification and encryption protocols may be used.

Jacobus Cornelius Haartsen

Papers

Radio personal communications system and method for allocating frequencies for communications between a cellular terminal and a base station

Authentication and handover methods and systems for radio personal communications

Base station which relays cellular verification signals via a telephone wire network to verify a cellular radio telephone

Secure radio personal communications system and method

Radio personal communications system and method for initiating communications between a base station and a cellular terminal