Thank you for downloading case studies in superconducting magnets design and operational issues. Maybe you have knowledge that, people have look numerous times for their favorite books like this case studies in superconducting magnets design and operational issues, but end up in infectious downloads. Rather than reading a good book with a cup of tea in the afternoon, instead they are facing with some infectious virus inside their computer.

Case Studies In Superconducting Magnets Design And Operational Issues

Power systems are becoming more and more complex in nature due to the integration of several power electronic devices. Protection of such systems and augmentation of reliability as well as stability highly depend on limiting the fault currents. Several fault current limiters (FCLs) have been applied in power systems as they provide rapid and efficient fault current limitation. This paper presents a comprehensive literature review of the application of different types of FCLs in power systems. Applications of superconducting and non-superconducting FCLs are categorized as: (1) application in generation, transmission and distribution networks; (2) application in alternating current (AC)/direct current (DC) systems; (3) application in renewable energy resources integration; (4) application in distributed generation (DG); and (5) application for reliability, stability and fault ride through capability enhancement. Modeling, impact and control strategies of several FCLs in power systems are presented with practical implementation cases in different countries. Recommendations are provided to improve the performance of the FCLs in power systems with modification of its structures, optimal placement and proper control design. This review paper will be a good foundation for researchers working in power system stability issues and for industry to implement the ongoing research advancement in real systems.

https://www.mdpi.com/1996-1073/11/5/1025/pdf

Fault Current Limiters in Power Systems: A Comprehensive Review

For that wind plants are connected to an electric power grid through voltage source converter-based high-voltage direct-current (VSC-HVDC) transmission, the improvement of the VSC-HVDC system's robustness against a dc short-circuit fault is critical. This paper suggests the inductive and resistive superconducting fault current limiter (SFCL) to alleviate the fault current and enhance the system's transient behaviors. Each of the two SFCLs is installed in series with the dc transmission line, and once the fault is detected, the current-limiting inductance or resistance will be activated to affect the system characteristics. Herein, wind plants are based on doubly-fed induction generators, and related theoretical derivation and transient simulation analysis are done. From the results, both of the two SFCLs can limit the dc fault current, improve the dc-voltage sags and suppress the power fluctuations. By comparing the specific performance indexes including current-limiting ratio and restraining capability to voltage/power fluctuations, the resistive SFCL is more preferable than the inductive SFCL. At the end, the SFCL optimization technique considering current-limitation, voltage stability, and device cost are discussed, so as to further promote the SFCL's application in the VSC-HVDC system.

Comparison of Inductive and Resistive SFCL to Robustness Improvement of a VSC-HVDC System With Wind Plants Against DC Fault

Concerning that a short-circuit fault happens inside a microgrid system, parts of distributed generation (DG) units may not meet the fault ride-through (FRT) requirements and will be enforced to disconnect. This paper suggests a modified flux-coupling-type superconducting fault current limiter (SFCL) to improve the DG's FRT capability, and investigates the relay protection coordination in the microgrid. The SFCL's structural principle is introduced, and according to the fault characteristic of the microgrid under its grid-connected and islanded statuses, the modified SFCL's application fields are conducted. Furthermore, the directional overcurrent protection and differential protection are proposed for the microgrid's two statuses, respectively. Based on the transient simulations in the MATLAB, the SFCL's positive effects on enhancing the DG's FRT capability can be confirmed, and also it will not affect the relay protection coordination. A comparison of the conventional distance relay protection and the proposed protection scheme is performed, and the latter has a better applicability than the former to match the SFCL. Finally, regarding the impacts of fault type and fault resistance on the FRT operation and the proposed protection, technical discussions are performed preliminarily, and the application value of the SFCL integrated with the proposed protection is clarified further.

Application of a SFCL for Fault Ride-Through Capability Enhancement of DG in a Microgrid System and Relay Protection Coordination

https://purehost.bath.ac.uk/ws/files/152965173/CFS_additonal_information.pdf

Analysis of a new design of the hybrid energy storage system used in the residential m-CHP systems

This paper presents the design of a Superconducting Fault Current Limiter (SFCL) and calculation results of forces and stresses in the windings of a resistive fault current limiter. The design of the fault current limiter consists of two parallelly connected and magnetically coupled windings, cooled by a single stage cryocooler. Magnetically compensated windings made of HTS tape give a very low voltage on the limiter at a nominal current. Limitation of the short-circuit time and the value of the maximum initial fault current reduces the thermal and dynamic effects of the passage of a fault current. Using devices which limit the value of a fault current can lower the level of required short-circuit capacity of the elements in a system. However, selected means of fault currents limitation must maintain the power quality standards. A perfect fault current limiter is required to have substantial impedance in fault conditions and zero impedance at work currents. Such requirements are met by a SFCL. An increase of current caused by the occurrence of a fault current results in the transition of the superconducting material from the superconducting state into the resistive state. This increases the impedance of short-circuit loop, allowing the fault current value to decrease. During a short-circuit, the forces generated from the short-circuit current also act on the limiter windings. Short-circuit current causes stresses in the superconducting tape. Exceeding the permissible stress value results in an irreversible reduction in the critical current of the superconducting tape. Calculations of the forces and stresses in the HTS tape for the maximum value of the short-circuit current were carried out using the finite element method. The constructed limiter was tested and the winding design ensures that the tape stresses are at a safe level even for short-circuit currents.

https://www.mdpi.com/1996-1073/15/18/6519/pdf?version=1662534127

Janusz Kozak

Papers

Forces and Stresses in the Windings of a Superconducting Fault Current Limiter

Problemy cieplne w transformatorze HTS spowodowane przepływem prądu włączania