Electrical discharge machining (EDM) is one of the earliest non-traditional machining processes. EDM process is based on thermoelectric energy between the work piece and an electrode. A pulse discharge occurs in a small gap between the work piece and the electrode and removes the unwanted material from the parent metal through melting and vaporising. The electrode and the work piece must have electrical conductivity in order to generate the spark. There are various types of products which can be produced using EDM such as dies and moulds. Parts of aerospace, automotive industry and surgical components can be finished by EDM. This paper reviews the research trends in EDM on ultrasonic vibration, dry EDM machining, EDM with powder additives, EDM in water and modeling technique in predicting EDM performances.

A review on current research trends in electrical discharge machining (EDM)

Parametric optimization of powder mixed electrical discharge machining by response surface methodology

Technology and research developments in powder mixed electric discharge machining (PMEDM)

Effect of Silicon Powder Mixed EDM on Machining Rate of AISI D2 Die Steel

In microelectrodischarge machining (micro-EDM), dielectric plays an important role during machining operation. The machining characteristics are greatly influenced by the nature of dielectric used during micro-EDM machining. Present paper addresses the issues of micro-EDM utilizing different types of dielectrics such as kerosene, deionized water, boron carbide (B4C) powder suspended kerosene, and deionized water to explore the influence of these dielectrics on the performance criteria such as material removal rate (MRR), tool wear rate (TWR), overcut, diameteral variance at entry and exit hole and surface integrity during machining of titanium alloy (Ti-6Al-4V). The experimental results revealed that MRR and TWR are higher using deionized water than kerosene. Also, when suspended particles, i.e., boron carbide-mixed dielectrics are used, MRR is found to increase with deionized water, but TWR decreases with kerosene dielectric. Further analysis is carried out with the help of scanning electron microscope (SEM) micrographs, and it is found that the thickness of white layer is less on machined surface when deionized water is used as compared to kerosene. Also, a comparative study of machining time has been carried out for the four types of dielectrics at different machining parametric settings. Furthermore, the investigation on the machined surface integrity and wear on microtool tip have also been done in each type of the dielectrics with the help of SEM micrographs and optical photographs. Hence micro-EDM machining on Ti-6Al-4V work material with B4C-mixed dielectrics is performed in the investigation and reported the performance criteria of the process. It can be concluded from the research investigation that there is a great influence of mixing of boron carbide additive in deionized water dielectrics for enhancing machining performance characteristics in micro-EDM during microhole generation on Ti-6Al-4V alloy.

Jung Cherng Hung

Papers

Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining