There is considerable pressure to define the key requirements of 5G, develop 5G standards, and perform technology trials as quickly as possible. Normally, these activities are best done in series but there is a desire to complete these tasks in parallel so that commercial deployments of 5G can begin by 2020. 5G will not be an incremental improvement over its predecessors; it aims to be a revolutionary leap forward in terms of data rates, latency, massive connectivity, network reliability, and energy efficiency. These capabilities are targeted at realizing high-speed connectivity, the Internet of Things, augmented virtual reality, the tactile internet, and so on. The requirements of 5G are expected to be met by new spectrum in the microwave bands (3.3-4.2 GHz), and utilizing large bandwidths available in mm-wave bands, increasing spatial degrees of freedom via large antenna arrays and 3-D MIMO, network densification, and new waveforms that provide scalability and flexibility to meet the varying demands of 5G services. Unlike the one size fits all 4G core networks, the 5G core network must be flexible and adaptable and is expected to simultaneously provide optimized support for the diverse 5G use case categories. In this paper, we provide an overview of 5G research, standardization trials, and deployment challenges. Due to the enormous scope of 5G systems, it is necessary to provide some direction in a tutorial article, and in this overview, the focus is largely user centric, rather than device centric. In addition to surveying the state of play in the area, we identify leading technologies, evaluating their strengths and weaknesses, and outline the key challenges ahead, with research test beds delivering promising performance but pre-commercial trials lagging behind the desired 5G targets.

5G : A tutorial overview of standards, trials, challenges, deployment, and practice

The wireless research community aspires to conceive full duplex operation by supporting concurrent transmission and reception in a single time/frequency channel for the sake of improving the attainable spectral efficiency by a factor of two as compared to the family of conventional half duplex wireless systems. The main challenge encountered in implementing FD wireless devices is that of finding techniques for mitigating the performance degradation imposed by self-interference. In this article, we investigate the potential FD techniques, including passive suppression, active analog cancellation, and active digital cancellation, and highlight their pros and cons. Furthermore, the troubles of FD medium access control protocol design are discussed for addressing the problems such as the resultant end-to-end delay and network congestion. Additionally, an opportunistic decode-andforward- based relay selection scheme is analyzed in underlay cognitive networks communicating over independent and identically distributed Rayleigh and Nakagami-m fading channels in the context of FD relaying. We demonstrate that the outage probability of multi-relay cooperative communication links can be substantially reduced. Finally, we discuss the challenges imposed by the aforementioned techniques and a range of critical issues associated with practical FD implementations. It is shown that numerous open challenges, such as efficient SI suppression, high-performance FD MAC-layer protocol design, low power consumption, and hybrid FD/HD designs, have to be tackled before successfully implementing FD-based systems.

/pdf/full-duplex-techniques-for-5g-networks-self-interference-4szayguaaf.pdf

Full duplex techniques for 5G networks: self-interference cancellation, protocol design, and relay selection

Physical layer security which safeguards data confidentiality based on the information-theoretic approaches has received significant research interest recently. The key idea behind physical layer security is to utilize the intrinsic randomness of the transmission channel to guarantee the security in physical layer. The evolution toward 5G wireless communications poses new challenges for physical layer security research. This paper provides a latest survey of the physical layer security research on various promising 5G technologies, including physical layer security coding, massive multiple-input multiple-output, millimeter wave communications, heterogeneous networks, non-orthogonal multiple access, full duplex technology, and so on. Technical challenges which remain unresolved at the time of writing are summarized and the future trends of physical layer security in 5G and beyond are discussed.

/pdf/a-survey-of-physical-layer-security-techniques-for-5g-bzkycilrb1.pdf

A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead

The evolving fifth generation (5G) cellular wireless networks are envisioned to provide higher data rates, enhance end-user quality-of-experience (QoE), reduce end-to-end latency, and lower energy consumption This article presents several emerging technologies which could enable and define future 5G mobile communication standards and cellular networks We highlight the key ideas for each technology and the major open research challenges related to measurement, testing and validating the performance of 5G system components Then, we highlight the fundamental research challenges for resource management in 5G systems

https://hal.archives-ouvertes.fr/hal-01121142/document

5G cellular: key enabling technologies and research challenges

The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time slots or frequency subbands. Hence, the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyze the main impairments (e.g., phase noise, power amplifier nonlinearity, as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD-based media access control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communications.

/pdf/full-duplex-wireless-communications-challenges-solutions-and-19h5r8ggkj.pdf

Full-Duplex Wireless Communications: Challenges, Solutions, and Future Research Directions

Self-interference cancellation invalidates a long-held fundamental assumption in wireless network design that radios can only operate in half duplex mode on the same channel. Beyond enabling true in-band full duplex, which effectively doubles spectral efficiency, self-interference cancellation tremendously simplifies spectrum management. Not only does it render entire ecosystems like TD-LTE obsolete, it enables future networks to leverage fragmented spectrum, a pressing global issue that will continue to worsen in 5G networks. Self-interference cancellation offers the potential to complement and sustain the evolution of 5G technologies toward denser heterogeneous networks and can be utilized in wireless communication systems in multiple ways, including increased link capacity, spectrum virtualization, any-division duplexing (ADD), novel relay solutions, and enhanced interference coordination. By virtue of its fundamental nature, self-interference cancellation will have a tremendous impact on 5G networks and beyond.

Jung Choi

Papers

Applications of self-interference cancellation in 5G and beyond