A multiple-access MIMO WLAN system that employs MIMO, OFDM, and TDD. The system (1) uses a channel structure with a number of configurable transport channels, (2) supports multiple rates and transmission modes, which are configurable based on channel conditions and user terminal capabilities, (3) employs a pilot structure with several types of pilot (e.g., beacon, MIMO, steered reference, and carrier pilots) for different functions, (4) implements rate, timing, and power control loops for proper system operation, and (5) employs random access for system access by the user terminals, fast acknowledgment, and quick resource assignments. Calibration may be performed to account for differences in the frequency responses of transmit/receive chains at the access point and user terminals. The spatial processing may then be simplified by taking advantage of the reciprocal nature of the downlink and uplink and the calibration.

MIMO WLAN system

A MIMO system supports multiple spatial multiplexing modes for improved performance and greater flexibility. These modes may include (1) a single-user steered mode that transmits multiple data streams on orthogonal spatial channels to a single receiver, (2) a single-user non-steered mode that transmits multiple data streams from multiple antennas to a single receiver without spatial processing at a transmitter, (3) a multi-user steered mode that transmits multiple data streams simultaneously to multiple receivers with spatial processing at a transmitter, and (4) a multi-user non-steered mode that transmits multiple data streams from multiple antennas (co-located or non co-located) without spatial processing at the transmitter(s) to receiver(s) having multiple antennas. For each set of user terminal(s) selected for data transmission on the downlink and/or uplink, a spatial multiplexing mode is selected for the user terminal set from among the multiple spatial multiplexing modes supported by the system.

MIMO system with multiple spatial multiplexing modes

Pilots suitable for use in MIMO systems and capable of supporting various functions are described. The various types of pilot include - a beacon pilot, a MIMO pilot, a steered reference or steered pilot, and a carrier pilot. The beacon pilot is transmitted from all transmit antennas and may be used for timing and frequency acquisition. The MIMO pilot is transmitted from all transmit antennas but is covered with different orthogonal codes assigned to the transmit antennas. The MIMO pilot may be used for channel estimation. The steered reference is transmitted on specific eigenmodes of a MIMO channel and is user terminal specific. The steered reference may be used for channel estimation. The carrier pilot may be transmitted on designated subbands/antennas and may be used for phase tracking of a carrier signal. Various pilot transmission schemes may be devised based on different combinations of these various types of pilot.

Pilots for mimo communication systems

For transmit diversity in a multi-antenna OFDM system, a transmitter encodes, interleaves, and symbol maps traffic data to obtain data symbols. The transmitter processes each pair of data symbols to obtain two pairs of transmit symbols for transmission from a pair of antennas either (1) in two OFDM symbol periods for space-time transmit diversity or (2) on two subbands for space-frequency transmit diversity. N T ·(N T −1)/2 different antenna pairs are used for data transmission, with different antenna pairs being used for adjacent subbands, where N T is the number of antennas. The system may support multiple OFDM symbol sizes. The same coding, interleaving, and modulation schemes are used for different OFDM symbol sizes to simplify the transmitter and receiver processing. The transmitter performs OFDM modulation on the transmit symbol stream for each antenna in accordance with the selected OFDM symbol size. The receiver performs the complementary processing.

Transmit diversity processing for a multi-antenna communication system

Closed-loop rate control for data transmission on multiple parallel channels is provided. An inner loop estimates the channel conditions for a communication link and selects a suitable data rate for each of the multiple parallel channels based on the channel estimates. For each parallel channel, a received SNR is computed based on the channel estimates, an operating SNR is computed based on the received SNR and an SNR offset for the parallel channel, and the data rate is selected based on the operating SNR for the parallel channel and a set of required SNRs for a set of data rates supported by the system. An outer loop estimates the quality of data transmissions received on the multiple parallel channels and adjusts the operation of the inner loop. For example, the SNR offset for each parallel channel is adjusted based on the status of packets received on that parallel channel.

Closed-loop rate control for a multi-channel communication system

When channel state information is known at a transmitter in multiple-input multiple-output systems, the optimum capacity is given by eigenmode channel division with water-pouring power control. In this eigenbeam-space division multiplexing (E-SDM), bit assignment to substreams based on the capacity is not optimum due to the fact that the number of assigned bits is expressed by a discrete quantity. In the paper, a method to assign both bit and transmit power to each substream based on the criterion minimizing total bit error rate (BER) is developed, and the BER performance is numerically analyzed in comparison to spatial division multiplexing (SDM). The simulation results assuming 5-transmit and 2-receive antennas show that the E-SDM provides about 10 dB gain compared to the conventional SDM at average BER of 10/sup -3/.

K. Miyashita

Papers

High data-rate transmission with eigenbeam-space division multiplexing (E-SDM) in a MIMO channel