A new adsorbent, bead cellulose loaded with iron oxyhydroxide (BCF), was prepared and applied for the adsorption and removal of arsenate and arsenite from aqueous systems. The continuing loading process of Fe in the cellulose beads was realized through hydrolization of ferric salts when alkaline solution was added dropwise. Spherical BCF had excellent mechanical and hydraulic properties. Akaganeite (beta-FeOOH), the reactive center of BCF that was stably loaded into the cellulose, had a high sensitivity to arsenite as well as arsenate. The maximum content of Fe in BCF reached 50% (w/w). In this study we investigated the adsorption behavior of arsenite and arsenate on BCF, including adsorption isotherms, adsorption kinetics, the influence of pH and competing anions on adsorption, and column experiments. The adsorption data accorded with both Freundlich and Langmuir isotherms. The adsorption capacity for arsenite and arsenate was 99.6 and 33.2 mg/g BCF at pH 7.0 with an Fe content of 220 mg/ mL. Kinetic data fitted well to the pseudo-second-order reaction model. Arsenate elimination was favored at acidic pH, whereas the adsorption of arsenite by BCF was found to be effective in a wide pH range of 5-11. Under the experimental conditions, the addition of sulfate had no effect on arsenic adsorption, whereas phosphate greatly influenced the elimination of both arsenite and aresenate. Silicate moderately decreased the adsorption of arsenite, but not arsenate. Both batch experiments and column experiments indicated that BCF had higher removal efficiency for arsenite than for arsenate. While the influent contaminant concentration was 500 microg/L in groundwater and the empty-bed contact time (EBCT) for arsenite and arsenate was 4.2 and 5.9 min, breakthrough empty-bed volumes at the WHO provisional guideline value of 10 microg/L were 2200 and 5000, respectively. BCF can be effectively regenerated when elution is done with 2 M NaOH solution. The column experiments for four cycles showed that stable and high removal efficiency of arsenic was sustained by BCF after regeneration.

Removal of Arsenic by Bead Cellulose Loaded with Iron Oxyhydroxide from Groundwater

Tailored functionalization of iron oxide nanoparticles for MRI, drug delivery, magnetic separation and immobilization of biosubstances.

Cellulose acetate is one of the most important esters of cellulose. Depending on the way it has been processed cellulose acetate can be used for great varies of applications (e.g. for films, membranes or fibers). The properties of the applied cellulose acetates are very important for these applications. A special field for using cellulose acetate is the synthesis of porous, spherical particles, so called cellulose beads. Different types of technical cellulose acetates were used and their ability to form such cellulose beads was characterized. First the different types of cellulose acetates were characterized by means of solubility; turbidity and degree of substitution. In addition the molar mass and the distribution of substituents along the polymeric chain were analyzed. Next, the cellulose beads were synthesized within an emulsion process using these different cellulose acetates. Then the properties (particle size, porosity, morphology) of the cellulose beads were determined. Finally, the relationship between the characteristic of cellulose acetates and properties of cellulose beads was investigated.

https://blogs.unpad.ac.id/evyerna/files/2010/11/ca.pdf

K. Pommerening

Papers

Bead cellulose derivatives as supports for immobilization and chromatographic purification of proteins.